RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: Ms Betty is ready! [打印本頁]

作者: rockdragon    時間: 2009-7-3 12:34
標題: Ms Betty is ready!
She is a RF under the Betty shell ...



                               
登錄/註冊後可看大圖



                               
登錄/註冊後可看大圖



                               
登錄/註冊後可看大圖



                               
登錄/註冊後可看大圖



                               
登錄/註冊後可看大圖



                               
登錄/註冊後可看大圖



now ....... when will be the next crawler party? ....  
作者: 熾天使    時間: 2009-7-5 21:35
一架呢種車大約要幾錢阿?
作者: ln9394    時間: 2009-7-6 00:21
請問個dig係邊道買嫁?
作者: sunfffd    時間: 2009-7-6 13:34
wow is this the Losi crawler?
作者: bd410    時間: 2009-7-6 14:49
It should be Kyosho Rock Force. The DIG system is an optional item and can be bought from Hung * at KWS.
作者: rockdragon    時間: 2009-7-6 20:25
Yes. It is Kyosho RockForce.

I already install the HS worm gears, the Dig system with the XTreme Racing Chassis. All the Blue parts are Hot Racing parts.

The wheel base was extended to 12.5" by using the rear upper links as the rear lower links, then the rear upper links were replaced by the Traxxas part#5138 - 108mm Front Turnbuckles of T-Maxx.

Also the original front 3 links were changed to 4 link suspension by using the other rear upper link mount with the original rear lower links that were removed from the extended wheelbase. Before install the upper links, I have to turn around the axle together with turn around the worm gear top piece and the turn Knuckles, too.

Last thing is the spur + pinion set were changed to 32 pitch set as the outrunner BL motor is 5mm size shaft that easily find the 5 mm 32 pitch pinion. The maximum size of the spur can be fitted into the chassis is 60 tooth 32 pitch spur.

That's about it.  
作者: GJ313    時間: 2009-7-6 21:08
纤维侧板真不错!!!!靓!!!!!!!!!我也有一台,AX10的壳好看!!
看看我的车...........http://bbs.rcfans.com/viewthread ... &extra=page%3D4
作者: bd410    時間: 2009-7-6 21:23
Why do you choose the outrunner  BL motor? Thx!
作者: rockdragon    時間: 2009-7-6 23:24
Why do you choose the outrunner  BL motor? Thx!
bd410 發表於 2009-7-6 21:23




I do really need all the extra torque of the outrunner BL motor to drive this heavy car.

The other thing is I already put the High Speed worm gears in, so the low KV of the outrunner BL motor is acceptable.




歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://rc-evo.com/xbbs/) Powered by Discuz! X3.2