RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: CNC made rear + front guard and exhaust pipe for sand scorcher and buggy champ [打印本頁]

作者: combatfung 時間: 2010-4-7 21:24
標題: CNC made rear + front guard and exhaust pipe for sand scorcher and buggy champ
本帖最後由 combatfung 於 2010-4-11 02:27 編輯

[attach]360412[/attach]
[attach]360411[/attach]
[attach]360413[/attach]
[attach]360414[/attach]
i found this proto parts in my friend office , and take it home for photo
, heard that will produce 100 pcs each , but the colour is still planing for which colour
any ching want this parts ?? and what colour do U like ???

作者: Oakfield 時間: 2010-4-7 22:01
How much?

作者: combatfung 時間: 2010-4-7 22:07
本帖最後由 combatfung 於 2010-4-7 22:09 編輯

around $160-180 each !!! can buy toghter for a better price ,
and only produce for 100 pcs ,make of aluminium and CNC milled
,u can say this is a limited edition

作者: pug 時間: 2010-4-7 22:19
回復 3# combatfung

師兄,最好叫你個朋友做埋前面個bumper(真車果個),咁就真係perfect!

作者: RCFOX 時間: 2010-4-7 22:56
我個人就喜歡光面銀色會好睇，黑色就原汁原咮(但怕會脫色)。

作者: combatfung 時間: 2010-4-7 22:57
我有叫, 但是成本太貴, 如果賣到$300, 我都唔買!

作者: pug 時間: 2010-4-7 23:05
回復 6# combatfung

咁不如叫你個朋友靜係做前面果份,我覺得一定好受歡迎,因為無出過

作者: combatfung 時間: 2010-4-7 23:28
try try la

作者: combatfung 時間: 2010-4-8 08:45
本帖最後由 combatfung 於 2010-4-8 08:48 編輯

我個人就喜歡光面銀色會好睇，黑色就原汁原咮(但怕會脫色)。
RCFOX 發表於 2010-4-7 22:56

登錄/註冊後可看大圖

[attach]360599[/attach]
[attach]360600[/attach]
[attach]360601[/attach]
[attach]360602[/attach]
i have polished the rear guard like this

作者: ericlam 時間: 2010-4-8 09:12
pls check pm

作者: fyin 時間: 2010-4-8 09:21
我都想要一套.

作者: wildbruiser 時間: 2010-4-8 12:59
前面bumper吸引d

作者: combatfung 時間: 2010-4-8 23:35
前面bumper is in progress.......

作者: pug 時間: 2010-4-9 09:41
回復 13# combatfung

期待期待!

作者: combatfung 時間: 2010-4-9 17:52
想問下各Ching鐘意前bumper安裝係車殼定係車
底板度,我朋友想知,因為想做得好的^_^

作者: RCFOX 時間: 2010-4-9 18:21
bumper安裝係車底板度好睇的 , 及預我一份

作者: pug 時間: 2010-4-10 02:17
回復 15# combatfung

車低好的,最好係裝係佢bumper的screw位到!

作者: wildbruiser 時間: 2010-4-10 06:53
回復 15# combatfung

車底la, 如價錢合理, 必買.

作者: ericlam 時間: 2010-4-10 12:39
車底la, 如價錢合理, 必買, agree!

作者: combatfung 時間: 2010-4-11 01:59
OK , will upload the photo if the sample come out ! but my friens now in vietnam......so the sample will come out after 10 days at least

作者: combatfung 時間: 2010-4-11 02:00
any Ching want it and please PM me , let me court the quantity and report to my friend !

作者: combatfung 時間: 2010-4-11 02:16
本帖最後由 combatfung 於 2010-4-11 02:26 編輯

[attach]361704[/attach]
[attach]361709[/attach]
[attach]361710[/attach]
[attach]361707[/attach]

5mm pipe front guard OK ma ???

作者: combatfung 時間: 2010-4-11 02:32
a smaller one (4mm pipe) come out next two days

作者: pug 時間: 2010-4-11 13:23
回復 21# combatfung

師兄我有興趣,如有請通知

作者: combatfung 時間: 2010-4-11 19:21
the smaller one will base on the 5mm pipe style , post the proto one (plastic) later, the bumper guard will makeby CNC in 7075 aluminium

作者: B.. 時間: 2010-4-11 21:31
俾兩張相片師兄參考，bumper應該裝左車頭底板底下，
用上那四稞鑼絲應該比較好，除像真車那種"架"形式之外，
也可考慮"板"形，+ 鑽洞
後波箱也可以做一塊金屬保護後波箱
甚至一塊過金屬底板。

小小建議，希望幫到師兄！^^

想問下各Ching鐘意前bumper安裝係車殼定係車
底板度,我朋友想知,因為想做得好的^_^
combatfung 發表於 2010-4-9 05:52 PM

登錄/註冊後可看大圖

作者: combatfung 時間: 2010-4-11 22:15
Ching .......really good wow, i like it , could U give me a sample then i make it for the ching here

作者: combatfung 時間: 2010-4-11 22:17
[attach]361929[/attach]
[attach]361930[/attach]
[attach]361931[/attach]
the exhaust pipe confrim independantly ,
not attached with the rear guard

作者: python 時間: 2010-4-12 00:37
Good product

作者: B.. 時間: 2010-4-12 00:54
我無Sample啊師兄，照片是從網上找回來，如需要多些照片，請PM我聯絡方法，謝謝！^^

Ching .......really good wow, i like it , could U give me a sample then i make it for the ching here
combatfung 發表於 2010-4-11 10:15 PM

登錄/註冊後可看大圖

作者: B.. 時間: 2010-4-12 00:54
我無Sample啊師兄，照片是從網上找回來，如需要多些照片，請PM我聯絡方法，謝謝！^^

Ching .......really good wow, i like it , could U give me a sample then i make it for the ching here
combatfung 發表於 2010-4-11 10:15 PM

登錄/註冊後可看大圖

作者: bmw740i 時間: 2010-4-12 02:04
CNC made..... Really??

作者: combatfung 時間: 2010-4-12 07:20
yes, fully cnc make

作者: combatfung 時間: 2010-4-15 23:22
Ver 1.5 in 4mm pipe
[attach]363305[/attach]
[attach]363306[/attach]
[attach]363307[/attach]
[attach]363308[/attach]
Ching 5mm or 4mm is better
any opinion

作者: RCFOX 時間: 2010-4-16 09:13
5mm好睇的

作者: combatfung 時間: 2010-4-20 22:47
[attach]365154[/attach]
[attach]365156[/attach]
[attach]365155[/attach]
[attach]365157[/attach]
[attach]365158[/attach]
[attach]365160[/attach]
[attach]365159[/attach]
the front guard 2.0 final version
in progress next week, please leave
me the Phone No in my PM to confrim

作者: combatfung 時間: 2010-6-14 23:59
The CNC make rear guard for the sand Scorcher/Buggy Champ ia arrived in my friend company !
http://www.precision-product.com/index.php?cPath=2
Bro's want the item , please leave me your phone No to arrange collect the item !
[attach]384346[/attach]

作者: fyin 時間: 2010-6-17 09:28
Pls. check pm.
Thanks.

作者: Mobility(雲) 時間: 2010-6-17 11:33
i would like to have the front guard 2.0...
when does it available? please......

作者: combatfung 時間: 2010-6-18 00:37
next month , or try to release earlier!

作者: fat_fat_cat 時間: 2010-6-18 10:26
interesting with both, can you supply more information?? Many thanks C Hing

作者: combatfung 時間: 2010-6-19 00:28
www.precision-product.com

作者: combatfung 時間: 2010-6-28 22:02
[attach]389194[/attach]
[attach]389195[/attach]
[attach]389196[/attach]
they are coming soon

作者: Mobility(雲) 時間: 2010-6-28 22:50

they are coming soon
combatfung 發表於 2010-6-28 10:02 PM

登錄/註冊後可看大圖

You are MAN......

作者: combatfung 時間: 2010-6-28 23:06
meaning ???????

作者: ericlam 時間: 2010-6-29 09:27
C Hing, 幾時有得賣

作者: combatfung 時間: 2010-6-29 23:08
end of july , may be ???

作者: combatfung 時間: 2010-7-1 18:46
[attach]390110[/attach]
[attach]390111[/attach]
[attach]390112[/attach]
[attach]390113[/attach]
[attach]390109[/attach]
these are the proto parts i install, any suggestion in colour ??

作者: kei777 時間: 2010-7-1 21:35
回復 48# combatfung

登錄/註冊後可看大圖

正呀!!

作者: denden 時間: 2010-7-23 17:12
ching, 我都想要一套，前後bumper and 死氣喉，要幾錢？

作者: denden 時間: 2010-7-23 17:13
買2套會晤會平dd？

作者: watchmanll 時間: 2010-7-29 00:17
請問係邊到買???

作者: ericlam 時間: 2010-8-13 12:37
C Hing 有得賣未呀

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://rc-evo.com/xbbs/)