標題: Team Durango not just make you BROKE, also make you feel LOST!!! [打印本頁] 作者: DK666 時間: 2012-6-22 12:16 標題: Team Durango not just make you BROKE, also make you feel LOST!!! 本帖最後由 DK666 於 2012-6-22 12:26 編輯
If you get the
#TD220001
$40.00
BALANCING WEIGHT SET
and you want the
#TD320141
$20.00
REAR BUMPER SET
just forget that cause they won" work together.........
and I don"t think any C-Hing want to install the TD 220001 and make the Buggy or Short Course looks like this.....
NO PROTECTION AT ALL........................
And these two options won"t fit the DESC 410R....
#TD310022
$4.00
DRIVESHAFT BOOT OUTDRIVE (2pcs)
#TD310023
$4.00
DRIVESHAFT BOOT WHEEL AXLE (2pcs)
And the
#TD310155
$29.00
MID DRIVE GEAR PLATE (ALUMINIUM) (25MM) (2010 Spec)
well, it'll fit the DESC 410R, but I'm still finding a way to install the Battery Holder Stand..... 作者: sex8088 時間: 2012-6-22 12:28
Team Durango 代言人, 勁!作者: DK666 時間: 2012-6-22 12:35 回復 sex8088 的帖子
代你個頭
言你個囉
人你個X
肯開鋪呢咩....大老細作者: joho 時間: 2012-6-22 13:01
Sorry to hear your foundings.... Lok Wah actually did not use any weight set on his SC, and for myself, I use the weight set below:
[attach]634100[/attach] 作者: sex8088 時間: 2012-6-22 13:05 回復 DK666 的帖子
just wake up作者: DK666 時間: 2012-6-22 13:08 本帖最後由 DK666 於 2012-6-22 13:09 編輯
Ching, what about the
#TD310155
$29.00
MID DRIVE GEAR PLATE (ALUMINIUM) (25MM) (2010 Spec)
this option fit both the DEX 410V3 and DESC 410R....
but for the DESC 410R, I can't find any way to install the battery holder stand that came with the kit...作者: joho 時間: 2012-6-22 13:09
let me check. I cannot recall this part number out of my head. You have any photo?作者: DK666 時間: 2012-6-22 13:12 回復 joho 的帖子
will upload pics after lunch...thx!作者: joho 時間: 2012-6-22 13:35
you will also need td320005 to make the alu diff stand work.作者: joho 時間: 2012-6-22 13:35 本帖最後由 joho 於 2012-6-22 13:49 編輯
you will also need td320005 to make the alu diff stand work. And I do think this parts come with the SC already, try to check your boxes first see whether you can found it
[attach]634104[/attach] 作者: mlee 時間: 2012-6-22 14:12
DK666 C-Hing, I have few pcs of td320005 and have no use, please let me know if you need.作者: DK666 時間: 2012-6-22 15:01 回復 mlee 的帖子
Thx alot guys, but the kit did came with that and the problem is that if install the MID DRIVE GEAR PLATE (ALUMINIUM) (25MM) (2010 Spec), I don't see if there's anyway to put the td320005, just take alook at the manuel of the DESC 410R(P19)... 作者: joho 時間: 2012-6-22 15:10
Ok DK666 Brother, I have double check and confirm a few fact, and I am sorry for all the trouble you are having.
TD310155 were not design as a Optional parts for DESC410R, it was for the 410 Buggy series only. If you check TD website, they have clearly mention this.
You are right that there are no holes on the chassis for TD320005 for the DESC410R.
To help you out, please let me know where you bought the parts from, then I will be able to help you get your refund on the parts. No worries.
I hope the above service are good enough for you作者: DK666 時間: 2012-6-22 15:18 回復 joho 的帖子
That's very nice of you, but the TD310155 already open...anyway, I got that from Andy(極速)作者: DK666 時間: 2012-6-22 15:22 回復 joho 的帖子
Just one stupid idea....what if I just drill two holes on the chassis...do you think that's a good idea?作者: BeLeBaLa 時間: 2012-6-23 02:37
c-hing, so this car is good to get?作者: DK666 時間: 2012-6-23 10:42
Dude, I hated that!!! Everything time after I got something I want within 3-6 months, they alway come up with a better version!!!作者: joho 時間: 2012-6-23 12:52
The major difference of the new version include some up grade parts, nothing that you cannot buy now. Its more like a op vereion. The only thing you cant get right now will be the new arms, which also will be a running change for the future. Nothing to be piss about.作者: iggihk 時間: 2012-6-23 22:31
人地一早問你點解無尾Bumper ga la, 重話係我地睇唔度.
我都話咗有尾Bumper ga la不過唔係option...作者: DK666 時間: 2012-6-23 22:49 回復 joho 的帖子
Don't worry! I ain't piss at all! Just saying BAD LUCK IS ON MY BACK...cause it happened to me many times before...作者: DK666 時間: 2012-6-26 11:25 回復 joho 的帖子
Pls PM me and if you want to call me, just PM me and let me know!
Thx, bro! 作者: joho 時間: 2012-6-26 11:49
I can ask. Get back to you later.作者: DK666 時間: 2012-6-26 12:25 回復 joho 的帖子
Ching, pls check this out for me too,
#TD330036
PIVOT BALL D-TYPE (4pcs) x2,
Thx a million!!!作者: joho 時間: 2012-6-26 14:17
OK guys, I have just double check with the Distributor,
TD330036--have stock
TD340002 下周到
TD310208 下周到
You can go to KWS to place your order right now.
A lot of you may confuse and thinks that I am working for the Distributor and I just want to say that I am not. Although, I am happy to help anyone with anything relative to Durango, or more, about EP buggy.
If you want to check whether certain parts from Durango are available or not, you can always contact the below ID, which are the official representative from Esteed Hobby, the official distributor for Team Durango in HK and China.
[attach]635066[/attach]
Of cause, you can also contact me, and I am more then willing to help.
joho ching, I already got the TD320132! Anyway, thx for your help!!!
Btw, any ching know where that I can get those rubber thing so I can just cut two piece and install them on the back of the bumper(black Circle), thx! 作者: DK666 時間: 2012-6-28 11:52 回復 mlee 的帖子
You were talking about these(Black Circle), right?