RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
查看: 1362|回復: 6
打印 上一主題 下一主題
收起左側

IS IT TRUE? KO 2.4G Interference Jam problem

[複製鏈接]
跳轉到指定樓層
1#
nel3838 發表於 2010-6-11 09:10:27 | 只看該作者 回帖獎勵 |倒序瀏覽 |閱讀模式

遊客登錄

您需要 登錄 才可以下載或查看,沒有帳號?新玩家註冊

x
C-Hing moon,

I am hearing some rumours about KO 2.4G interference problem "RF901S 2.4GHz", like jam by futaba 4pk etc. etc..   But then other C-Hing says they have no problem.  Is this true or false?

Please share your experience.
2#
hardmankam 發表於 2010-6-11 11:02:00 | 只看該作者
Sometimes I cannot bind my KO 2.4 Tx and Rx when I am at the track side.  I need to get back inside the room at TC or outside at the parking lot at TRC before they can bind again.  

When binded, there is no problem of jamming.
3#
odyssey 發表於 2010-6-12 06:42:00 | 只看該作者
本帖最後由 odyssey 於 2010-6-12 06:44 編輯

there was a known issue with binding problems (the transmitter not able to bind with the receiver while power up, the transmitter module LED is flashing for long period) when some futaba 4pk racers stand around the driver stand. this binding issue is able to resolve by sending back for upgrade or repairing. the problem was fixed for more than a year.

if you look in the board of the tx module look and see the color of the board. if its green send it in. if its pink or blue your cool. you can send the radio back to the factory for calibration, they should have no charge, but only mailing cost.
4#
 樓主| nel3838 發表於 2010-6-14 14:24:20 | 只看該作者


Thx C-Hing, do you know where to send the tx module back to factory for upgrading??  Any one can help.  And thx for the advice.
5#
 樓主| nel3838 發表於 2010-6-14 14:36:01 | 只看該作者
Thx C-Hing, do you know where to send the tx module back to factory for upgrading??  Any one can ...
nel3838 發表於 2010-6-14 14:24


I just contacted World Model (KO distributor in HK), they said now needs fixing cost for upgrading, unlike last year.  Oh well. . . .it is what it is I guess....   

Thx for advice.
6#
odyssey 發表於 2010-6-14 22:01:15 | 只看該作者
本帖最後由 odyssey 於 2010-6-14 22:06 編輯

回復 4# nel3838

    If you bought in the place other than North America, you can send your query to KO Japan e-mail: [email protected], they should able to provide the detail information and process on this. they should have no charge (this is the equipment defect), but you have to paid for the mailing cost for both trips...
7#
 樓主| nel3838 發表於 2010-6-14 22:12:33 | 只看該作者
回復  nel3838

    If you bought in the place other than North America, you can send your query t ...
odyssey 發表於 2010-6-14 22:01


Thanks for the advice, I will shall give them a try.
Cheers
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-5-7 14:24 , Processed in 0.051899 second(s), 15 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表