RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
查看: 1938|回復: 15
打印 上一主題 下一主題
收起左側

New hand CRC Gen X questions

[複製鏈接]
跳轉到指定樓層
1#
GigaRacer 發表於 2010-10-11 12:07:29 | 只看該作者 回帖獎勵 |倒序瀏覽 |閱讀模式

遊客登錄

您需要 登錄 才可以下載或查看,沒有帳號?新玩家註冊

x
Just got an used CRC Gen X.  What's the different between Gen X and Gen XL?  Their website said Gen XL is for Lipo.  Is there any other major differences?
2#
jf813 發表於 2010-10-11 12:36:45 | 只看該作者
main different is the rear pod.  XL stand with open rear pod for brushless.  X is option.
3#
 樓主| GigaRacer 發表於 2010-10-11 13:19:17 | 只看該作者
Does all newer 1/12 have standard tire mount?  Meaning it can fit with any 1/12 tires?
4#
 樓主| GigaRacer 發表於 2010-10-11 13:43:17 | 只看該作者
Does this one have open rear pod?  Thanks!
5#
hardmankam 發表於 2010-10-11 19:35:41 | 只看該作者
回復 4# GigaRacer

Your car is a GenX with an open pod.
CRC can accept standard 1/12 pre-mount tires.
6#
move7648 發表於 2010-10-11 21:49:04 | 只看該作者


咩係pre-mount呔?
係唔係所有現成呔都要磨呔?
有無鋪頭代工?
7#
rcmodel 發表於 2010-10-11 22:02:21 | 只看該作者
樓主架車好熟口面wor  係咪2 手買架?
8#
hardmankam 發表於 2010-10-11 22:12:46 | 只看該作者
咩係pre-mount呔?
-> pre-mount 呔是指已glue,已cut 的呔 =  即買即玩, 現成呔
係唔係所有現成呔都要磨呔?
-> 現成呔可磨,可吳磨. 但磨呔優點是你可以控制呔的厚度.
有無鋪頭代工?
-> 不知道. 但應考慮買磨呔機.
9#
hardmankam 發表於 2010-10-11 22:14:19 | 只看該作者
樓主架車好熟口面wor  係咪2 手買架?
rcmodel 發表於 2010-10-11 22:02


樓主住在美國 wor
10#
rcmodel 發表於 2010-10-11 22:18:41 | 只看該作者
仲以為戚calvin果架 tim
幾時有局呀 我成兩個星期冇玩12仔
11#
move7648 發表於 2010-10-11 22:19:10 | 只看該作者
咩係pre-mount呔?
-> pre-mount 呔是指已glue,已cut 的呔 =  即買即玩, 現成呔
係唔係所有現成呔都要磨呔 ...
hardmankam 發表於 2010-10-11 10:12 PM


明白
唔磨的話, 唔係厚d, com行d咩?
12#
hardmankam 發表於 2010-10-11 22:26:25 | 只看該作者
回復 11# move7648

對,唔磨=com d,
不過磨了呔好行d.
13#
hardmankam 發表於 2010-10-11 22:31:38 | 只看該作者
回復 10# rcmodel

This sat?  Oct 16 2010?
14#
 樓主| GigaRacer 發表於 2010-10-12 00:29:13 | 只看該作者
回復  GigaRacer

Your car is a GenX with an open pod.
CRC can accept standard 1/12 pre-mount tir ...
hardmankam 發表於 2010-10-11 03:35


Thank you C hing, again.
15#
rcmodel 發表於 2010-10-12 14:44:37 | 只看該作者
16 oct.  Ok. But 我好早會到around. 9:00
16#
hardmankam 發表於 2010-10-12 18:23:40 | 只看該作者
我 都 會 早 到 !
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-4-28 06:14 , Processed in 0.034158 second(s), 18 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表