原帖由 guitarking 於 2007-3-15 02:20 發表
How do people low down the front suspension? cut the spring?
Whats your purpose for lowering the front suspension?
To lessen the spring travel??
To lower the front body?
my solution to the above issue would be..
To lessen the spring travel??
- cut the spring (will affects the springs original performance)
- use shorter spring (hopefully with lessen turns springs)
To lower the front body?
- modified the shell holder(即係條利), at the same time check if the front wheel will touch the fender when fully compressed the suspension, if it does, then you need to add spring travel limiter.