RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: ~~~Share your 12son~~~ [打印本頁]

作者: joesheng    時間: 2011-5-22 16:17
標題: ~~~Share your 12son~~~
本帖最後由 joesheng 於 2011-5-22 23:31 編輯

[attach]497578[/attach]
[attach]497579[/attach]
[attach]497319[/attach]
[attach]497315[/attach]
[attach]497316[/attach]
[attach]497317[/attach]
[attach]497318[/attach]

作者: raymomo    時間: 2011-5-22 16:49
My 12 son
[attach]497328[/attach][attach]497329[/attach]

作者: t2    時間: 2011-5-22 17:20
多多指教.
[attach]497336[/attach][attach]497337[/attach]

作者: punchan    時間: 2011-5-22 17:31
very nice.....
作者: billlkyy    時間: 2011-5-22 18:15

                               
登錄/註冊後可看大圖

作者: gon628    時間: 2011-5-22 18:44
My Xray 11
作者: 蛇打七吋    時間: 2011-5-22 22:10
ready now
大家好,第一次玩12仔!請多多指教。

作者: tiger1    時間: 2011-5-23 15:04
what is the name of the red body?? very pretty wor
作者: 1524    時間: 2011-5-23 20:21
回復 joesheng 的帖子

ching,  請問你兩邊電池位藍色o個兩位是咩來的?
作者: 1524    時間: 2011-5-23 20:23
回復 蛇打七吋 的帖子

ching, 請問咁o既組合 (2S ESC, MOTOR + 1800 7.4V電), 一轉車可以玩幾耐?
作者: leongeric    時間: 2011-5-23 20:45
回復 joesheng 的帖子

good r 5    星期三會出現嗎?
作者: leongeric    時間: 2011-5-23 20:46
回復 raymomo 的帖子

good樂富門 十個like
作者: raymomo    時間: 2011-5-23 21:01
回復 leongeric 的帖子

多謝良哥仔、星期三晚再會(如果唔落雨的話)
作者: leongeric    時間: 2011-5-23 21:03
回復 raymomo 的帖子

ok ray 哥 到時見
作者: hihizaza    時間: 2011-5-23 21:55
CORALLY 12SL
作者: 1524    時間: 2011-5-23 21:56
thanks 蛇打同joesheng 兩位ching回覆~

作者: mikuro    時間: 2011-5-24 09:59
本帖最後由 mikuro 於 2011-5-30 21:16 編輯

My Xray XII Link

作者: 1524    時間: 2011-5-24 23:45
想請教o下玩2s o既ching,
如果行2s.....你地通常用幾t 摩打同搭咩齒比?

作者: pcm118    時間: 2011-5-25 00:47
XRAY XII LINK 多多指教
[attach]498342[/attach]


[attach]498343[/attach]





作者: joesheng    時間: 2011-5-25 23:25
回復 1524 的帖子

我地玩HW35A/60A搭9T摩打,巳經好夠做~
齒比仲試緊...(我用64P 88搭26,好夠快了)
作者: pcm118    時間: 2011-5-25 23:27
回復 pcm118 的帖子

nice to meet you joesheng ching!
作者: JohnnyC    時間: 2011-5-27 10:34
本帖最後由 JohnnyC 於 2011-5-27 10:35 編輯

新手報到 S120
[attach]499006[/attach]

作者: JohnnyC    時間: 2011-5-27 10:37
DIY 牌九小電架
[attach]499008[/attach]

作者: lung1    時間: 2011-5-27 10:39
JohnnyC 發表於 2011-5-27 10:34
新手報到 S120

請問一下SERVO 上面係咪接收電黎??
幾多V &mah??
作者: JohnnyC    時間: 2011-5-27 10:46
回復 lung1 的帖子

Hi Lung 1 C hing, 果個係Futaba接收用電容, 但我忘記左spec.
作者: JohnnyC    時間: 2011-5-27 10:53
回復 蛇打七吋 的帖子

比起之前一眾(如閣下)神速車手, 我極其量應只屬微辣!
作者: 蛇打七吋    時間: 2011-5-27 11:19
回復 JohnnyC 的帖子

大Ching : 快就要認,埋單要震定
快 D show 埋個殼欣賞下
作者: JohnnyC    時間: 2011-5-27 22:17
回復 蛇打七吋 的帖子

just finished the shell tonight!
[attach]499145[/attach]

作者: JohnnyC    時間: 2011-5-27 23:01
回復 JohnnyC 的帖子

Top?? great....quick quick
作者: JohnnyC    時間: 2011-5-27 23:20
靈感係未來自...i hv not much time to finish it!!!! hahahah
作者: joesheng    時間: 2011-5-28 23:01
回復 JohnnyC 的帖子

果然係"辛"手!!!!!!!
我不去吃飯,因為吃塵吃飽了
作者: ernestf    時間: 2011-5-28 23:24
My Xray 12Link

http://ernrc.blogspot.com/2011/05/new-equipment-on-xray-12-link.html


作者: nb576uk2004    時間: 2011-5-28 23:42
本帖最後由 nb576uk2004 於 2011-5-28 23:44 編輯

today run with Johnny C hing  12 son , quit fast ar
作者: jzx100mkll    時間: 2011-5-29 14:37
ernestf 發表於 2011-5-28 23:24
My Xray 12Link

http://ernrc.blogspot.com/2011/05/new-equipment-on-xray-12-link.html


                               
登錄/註冊後可看大圖


作者: joesheng    時間: 2011-6-1 23:03
"""12son night"""...Feeling good!!!!!!!!!
作者: mikuro    時間: 2011-6-1 23:10
joesheng 發表於 2011-6-1 23:03
"""12son night"""...Feeling good!!!!!!!!!

Yeah !!!
仲有同場加映"逆走" + "內檔大直路"
不同車種一齊走逆track, 仲好玩過順track ^^
作者: joesheng    時間: 2011-6-1 23:20
回復 mikuro 的帖子

下次我都想試下逆track呀
作者: mikuro    時間: 2011-6-1 23:34
回復 joesheng 的帖子

Gogogo
作者: pcm118    時間: 2011-6-2 00:17
joesheng 發表於 2011-6-1 23:03
"""12son night"""...Feeling good!!!!!!!!!

So exciting to play with so many 12son together!!
作者: mikuro    時間: 2011-6-2 00:24
pcm118 發表於 2011-6-2 00:17
So exciting to play with so many 12son together!!

Yes, and is really fun
作者: defcone    時間: 2011-6-2 03:10
[attach]501127[/attach]



My S120L with tubes conversion =)

作者: defcone    時間: 2011-6-2 17:09
本帖最後由 defcone 於 2011-6-2 20:16 編輯

i havent ran the car yet haha i will this Friday night will do a little review but i changed quite a bit of stuff on the car as.
Edit:我意思系轉左tubes未行過,.

作者: avenger    時間: 2011-6-2 21:32
回復 raymomo 的帖子

樂富門花!!!正!!!!
作者: Tinng    時間: 2011-6-4 21:24
Say hi to Chings


                               
登錄/註冊後可看大圖

作者: jf813    時間: 2011-6-8 09:19
[attach]502974[/attach][attach]502973[/attach]my s120
作者: jf813    時間: 2011-6-8 09:43
thanks hehe.  I am running LRP 3.5T with 12.25mm rotor.  
作者: mikuro    時間: 2011-6-8 10:34
jf813 發表於 2011-6-8 09:43
thanks hehe.  I am running LRP 3.5T with 12.25mm rotor.

Join the pancar meet at JV tonight if you are available.
作者: jf813    時間: 2011-6-8 11:23
tonight can't ar....  My car is at the track...  maybe next time ar.  Have not run at JV for sometime already....  Use what tires ar?  I will get it and come next time.  
作者: mikuro    時間: 2011-6-8 11:26
jf813 發表於 2011-6-8 11:23
tonight can't ar....  My car is at the track...  maybe next time ar.  Have not run at JV for sometim ...

No problem, play next time
The majority using Xceed FR(Medium), RR(Soft)
作者: Tinng    時間: 2011-6-8 11:47
Tinng 發表於 2011-6-4 21:24
Say hi to Chings

無法xceed係咬好多,但真係太短命,四排電就要轉轉痴呔
作者: jf813    時間: 2011-6-8 12:31
Try try matrix ar.  lot and lot of grip.  Personally I think too much grip for me.  But some other ching use it and the result is good.  
作者: JohnnyC    時間: 2011-6-13 11:48
改左雙回中油筒.....等試車!
[attach]504680[/attach]

作者: F810    時間: 2011-6-13 21:12

Who has the Delta Serious ?
作者: joesheng    時間: 2011-6-18 15:02
本帖最後由 joesheng 於 2011-6-18 15:02 編輯

轉會:
                                            ~~~Team CRC GEN-X~~~
[attach]506278[/attach][attach]506280[/attach][attach]506279[/attach][attach]506281[/attach]
作者: joesheng    時間: 2011-6-18 16:17
回復 joesheng 的帖子

點解我換crc,因為我:
     1)想試下性能(非性能力)有什麼分別;
     2)覺得crc佢有佢自己既設計(Front arm),有好多變化;
     3)自己本身都有架CRC PRO TEN,存PARTS都簡單D好D;
     4)鍾意囉...hehe
作者: joesheng    時間: 2011-6-18 16:44
回復 joesheng 的帖子

未咁快呀...下個禮拜啦
作者: jf813    時間: 2011-6-20 09:37
本帖最後由 jf813 於 2011-6-20 09:38 編輯

[attach]507062[/attach] Just finish my new body.  
作者: mikuro    時間: 2011-6-20 09:56
回復 jf813 的帖子

Nice colour match ^^
作者: hknewton    時間: 2011-6-20 10:17
我又share下先

1/12: 12R5.1
Servo: Savox 1350 (Plastic gear)
ESC: Hobbywing 60A with turbo
Motor: 11.5T
Battery: 3S lipo
Roll out: around 35-36 (still finding the best setting)


作者: joesheng    時間: 2011-6-20 19:30
回復 hknewton 的帖子

WOooooo....must very fast~
Good job!
作者: hihizaza    時間: 2011-6-20 20:43
my new 12 son
asso R5.1

作者: hihizaza    時間: 2011-6-20 21:10
but ugly shell!!!
作者: jf813    時間: 2011-6-21 09:07
回復 hihizaza 的帖子

nice clean setup ;)

作者: pd    時間: 2011-6-22 13:16
My 12 boy !
Thanks Gor 628 !!!

作者: mos-leung    時間: 2011-6-22 23:03
pd 發表於 2011-6-22 13:16
My 12 boy !
Thanks Gor 628 !!!

nice car,
did you run 1S or 2S ? if 1S using RX battery?
8.5T with super stock ESC ?
作者: pd    時間: 2011-6-23 07:45
mos-leung 發表於 2011-6-22 23:03
nice car,
did you run 1S or 2S ? if 1S using RX battery?
8.5T with super stock ESC ?

I use 2 cell ip lipo and 8.5T
作者: mikuro    時間: 2011-6-23 12:09
回復 pd 的帖子

Nice ride PD, remember to fine tune the servo server !
作者: mos-leung    時間: 2011-6-23 23:18
pd 發表於 2011-6-23 07:45
I use 2 cell ip lipo and 8.5T

2cell, which one? soft pack? Any photo?
作者: joesheng    時間: 2011-6-25 16:55
                          ~~~~~~My new old 12 son~~~~~~
[attach]508822[/attach][attach]508821[/attach]
作者: joesheng    時間: 2011-6-25 16:58
回復 joesheng 的帖子

[attach]508826[/attach]
作者: joesheng    時間: 2011-6-25 16:58
回復 joesheng 的帖子

[attach]508827[/attach]
作者: hihizaza    時間: 2011-6-25 20:50
你有影相白箱?
作者: hihizaza    時間: 2011-6-25 20:51
回復 joesheng 的帖子

你有影相白箱?
作者: joesheng    時間: 2011-6-25 23:04
回復 hihizaza 的帖子

我用麻雀紙....."say"蚊一張
作者: pd    時間: 2011-6-26 19:44
本帖最後由 pd 於 2011-6-26 19:49 編輯

with shell now!!!
作者: joesheng    時間: 2011-6-26 19:56
回復 pd 的帖子

Awesome art work~
作者: racart    時間: 2011-6-26 20:10
回復 pd 的帖子

好靚啊
作者: pd    時間: 2011-6-26 22:05
回復 pd 的帖子

Try to paint purple and transperance yellow with the front light
作者: leongeric    時間: 2011-6-26 23:29
回復 joesheng 的帖子

joe兄好仔,,,星期三出現????
作者: jf813    時間: 2011-6-27 09:42
回復 pd 的帖子

Nice wor, what body it is?
作者: joesheng    時間: 2011-7-6 22:59
回復 leongeric 的帖子

今晚你個12仔好似唔係好聽你話喎
作者: joesheng    時間: 2011-7-6 23:00
回復 hihizaza 的帖子

個仔慢慢教啦,唔好再打佢喇.........
作者: joesheng    時間: 2011-7-9 22:29
~~~~~~~~~~~~~~~~~~~~~~New option of my 12son~~~~~~~~~~~~~~~~~~~~~~
[attach]513580[/attach]
[attach]513581[/attach]
***Pro-sturt Graphite Brace + Short Pin Brace + Molded Upper Arms***

作者: hihizaza    時間: 2011-7-10 22:56
本帖最後由 hihizaza 於 2011-7-10 23:16 編輯

my new shell for 12 son!!!
作者: hihizaza    時間: 2011-7-11 16:26
用慣呢三隻色,好似成日用!
下次希望轉下色,去買油!
作者: vin00002002    時間: 2011-7-18 02:05
Nice 12 sons.
作者: vin00002002    時間: 2011-7-18 02:05
Nice 12 sons.
作者: dxmaxian    時間: 2011-7-20 00:27
Sahre my TOP rebel12
base on 787B

                               
登錄/註冊後可看大圖


作者: joesheng    時間: 2011-8-6 09:09
改裝前(GEN-X):
[attach]522261[/attach]
作者: joesheng    時間: 2011-8-6 09:10
改裝後(GEN-XL):
[attach]522262[/attach]
作者: move7648    時間: 2011-8-6 17:53
joe兄, gen-x同gen-xl有咩唔同??
作者: joesheng    時間: 2011-8-6 18:16
本帖最後由 joesheng 於 2011-8-6 18:16 編輯
move7648 發表於 2011-8-6 17:53
joe兄, gen-x同gen-xl有咩唔同??


Move兄,Gen-X 兩條side link 比較短,同埋side link無螺絲可以adjust ball cup 墟位,
XL係長既同埋有得adjust墟位的...
此外就係中間支shock,同車尾後塊graphite唔同囉~
作者: joesheng    時間: 2011-8-6 18:21
回復 move7648 的帖子

其實舊款唔係有d咩"問題"或者係"唔好跑",
最大既問題係,果兩條短side link經巳再無得賣(廠無造...
所以無辦法...
作者: move7648    時間: 2011-8-7 12:47
回復 joesheng 的帖子

我都收咗部二手crc, 但唔識分佢係邊一款
一陣post相, 你幫我睇下吖

作者: jzx100mkll    時間: 2011-8-7 13:19
My New Paint job ~~

                               
登錄/註冊後可看大圖

作者: jzx100mkll    時間: 2011-8-7 15:15
Jesus for what sin ~~
作者: joesheng    時間: 2011-8-7 15:27
回復 jzx100mkll 的帖子

Jesus for all
作者: joesheng    時間: 2011-8-7 22:20
回復 jzx100mkll 的帖子

比你????????????係比你"睇"渣.....搞清楚呀ching!!!!!!@凸@
作者: move7648    時間: 2011-8-14 10:30
回復 move7648 的帖子

Joe兄, 照睇我部係GEN-X如要改XL, 除咗長side link之外, 你講嗰套adjuct ball cap响邊度搵?

唔該~~

作者: Tamiya911    時間: 2011-8-14 11:19
move7648 發表於 2011-8-14 10:30
回復 move7648 的帖子

Joe兄, 照睇我部係GEN-X如要改XL, 除咗長side link之外, 你講嗰套adjuc ...

TKO brother




歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://rc-evo.com/xbbs/) Powered by Discuz! X3.2