各ching 有無試過EXACTLY 相同問題, 知唔知exactly 問題原因係點解呢?作者: bigbigboy 時間: 2012-4-14 16:42
I guess are dog bone issues. 作者: hardmankam 時間: 2012-4-14 16:48
Very nice conditions for a vintage car!
Anyway, maybe you can buy a 'remake' boomerang and change some parts. 作者: bear_cat_x 時間: 2012-4-14 21:23 回復 samchung90 的帖子
if you find no problem in gear boxes, then problems probably occurs outside gear boxes (it is nonsense , but it is the way to figure out problematic locations). such locations might be the shaft connecting front and rear gear box, swing shafts connecting gear boxes and wheels etc... all in all, you have to check through the transmission system.作者: tiger1 時間: 2012-4-17 21:15
Very 頭疼,買 re-release 喇。作者: fufumingming 時間: 2012-4-19 07:40
呢部車我有好多零件,睇吓幫唔幫到你?作者: tiger1 時間: 2012-4-19 07:55
卡卡聲 should be dogbones problem, get some CVD la, I think DF03 fits 作者: samsamfish 時間: 2012-4-20 13:05 本帖最後由 samsamfish 於 2012-4-20 14:01 編輯
作者: tiger1 時間: 2012-4-20 13:35
may be a good idea 作者: samchung90 時間: 2012-4-20 13:45 回復 samsamfish 的帖子
噢... 終於有ching 有相同問題... 我那架是用, 上圖"舊hotshot" 的小 C Ring, 而非下的DB4大介子, 你意思係, 用上圖的比較好? 但我的車車已經係上圖的 小 C Ring, ... 另外, 下圖你圈左MR13, 係咩意思, MR13 要注意什麼.... 謝謝師兄... 作者: tiger1 時間: 2012-4-20 13:49
師兄: 我架是用大介子, but I have no problem because I file down the MR11 so that it does not press onto the gearbox/大介子.... 謝謝作者: samchung90 時間: 2012-4-20 13:50 回復 samsamfish 的帖子
how did you exactly file down the MR11? could you tell me exactly how to do it? which side to file down? there are two umbrella gear beside MR11... the oppsite side too..do i need to take care of that too? it called bevel gear L and R there.. thanks a lot c hing.. 作者: samsamfish 時間: 2012-4-20 14:38 本帖最後由 samsamfish 於 2012-4-20 14:42 編輯