team power7.5T 磨打set turbo

SP 120A can support modified motor as low as 3.5T with turbo (However, with such low turn, turbo is meaningless as you cannot boost it too much). You will need

1. Make sure your ESC is prostock or GT2.0
2. download the newest firmware and load the proper firmware into the ESC. It should be 100528mod or 100528stock. Of course you need 100528 for 7.5T.
3. Do not use any advanced timing in your motor's endbell
4. Beware of overheat when setting the turbo (supercharge). 7.5T is not that low in term of modified.
5. Beware of gear ratio. Overgear will burn!
6. Finally, you still need to bear the risk. Suggest you send mail to SP for suggestion. If I were you I will set it from the lowest and monitor the temp and speed one by one.

Ps. I am using the same ESC but not dare to do so. I am using 4.5T. I am looking for cheap 6.5T. Hope that you could share your result afterward.

what is the internal ration??

回復 17# snipertat

Ching,

Can you share your gear ratio and which track you are playing on???? Super Thx!\

回復 20# 870110a


Ching,

Do you have the option LCD program card. GT2.0 pro, prostock 2.1 and GT2.0 LPF should able to use firmware 100528MOD. It is the firmware for modified motor (low turn down to 3.5R) and provide super charge option and setting!