RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
樓主: JerryLeung12
打印 上一主題 下一主題
收起左側

BMS ANDRE-B - 1.5 years project 86% complete

  [複製鏈接]
41#
 樓主| JerryLeung12 發表於 2012-1-3 16:55:18 | 顯示全部樓層
42#
 樓主| JerryLeung12 發表於 2012-1-3 16:56:29 | 顯示全部樓層
自由人 發表於 2012-1-3 16:19
船軸 同 船陀落雪油..( 甲板 同 座樓 封得好,已經唔會點入水.,,比人撞沉除外...)..一般將電子野升起就 ...

Yes, you are right again.. i know .. but i really fear "比人撞沉除外" hahaha
yes, i really need to test how hot heat sink generated...
43#
 樓主| JerryLeung12 發表於 2012-1-9 14:43:58 | 顯示全部樓層
START DECK...

44#
 樓主| JerryLeung12 發表於 2012-1-10 11:46:13 | 顯示全部樓層
自由人 發表於 2012-1-10 11:17
快D手啦....唔係新年冇船玩...好可憐嫁.........

Ei~~~
Next problem is this time i use Mixer (buy from england), but my futaba tramsmiter use FMASS 2.4G will influence the signal and need update the program in IC RAM.............

I like Mixer, but very difficult to setup and easy to burn the motor....
45#
 樓主| JerryLeung12 發表於 2012-1-10 11:50:48 | 顯示全部樓層
自由人 發表於 2012-1-10 11:48
咁點搞呢......新年冇船玩......

I will temporary setup the RAM by myself, but maybe need use fast speed to move the TUG---- very ugly...
Futaba tramsmitter after 6EX model, lots of problems in 2.4G system, i hate it, they will generate overlap signal to confuse the receiver....
46#
 樓主| JerryLeung12 發表於 2012-1-10 11:56:50 | 顯示全部樓層
自由人 發表於 2012-1-10 11:52
用返 FM 控.....

HAHAHA, i sell all FM controller la...
47#
 樓主| JerryLeung12 發表於 2012-1-11 16:23:41 | 顯示全部樓層
自由人 發表於 2012-1-10 11:59
買囉,,好平之麻......

I modify the program law and this time i try " Inward turning props for propeller set" , common set is set as " outward turning" try try will it damage my new tug. HO HO HO

Common method is that: more efficient and faster, but in Tuen Mun Pool, lots of rocks, so i try inward turning...

48#
 樓主| JerryLeung12 發表於 2012-1-11 16:32:37 | 顯示全部樓層
自由人 發表於 2012-1-11 16:28
隻拖船 車葉唔係有個 ( 剛 ) 咩....??? 內外轉都冇分別啦....

Lots of people think that... NO ga
Outward turn -- faster and stable, but lots of noise (Lot of Air) - save energy (battery)
Inward turn -- can very stable when slow movement but not efficient in fast move, and use lots of energy, but can little noise

Ship is that... lots of theory , good for our try.. so my tug use so long time building , very interesting..
49#
 樓主| JerryLeung12 發表於 2012-1-11 16:34:29 | 顯示全部樓層
And you can see lots of petrol / euro police boat will use inward for them easy close to other ship and outward for fast boat / lifeboats  
50#
 樓主| JerryLeung12 發表於 2012-1-11 16:52:53 | 顯示全部樓層
自由人 發表於 2012-1-11 16:44
你意思係 外轉 好D啦.... 我冇咩咁深入研究....一個字 * 懶 *

Yes, common is outward,  but i like to try... hahaha, maybe die hard.. hahaha
51#
 樓主| JerryLeung12 發表於 2012-1-11 17:12:39 | 顯示全部樓層
自由人 發表於 2012-1-11 17:01
乜都試下囉,,,( 唔好好似我以前帶團D大陸人咁,人妖都要試下...)

Wa........ they really "good taste" wow
52#
 樓主| JerryLeung12 發表於 2012-1-11 17:34:36 | 顯示全部樓層
自由人 發表於 2012-1-11 17:23
痴線嫁,,帶佢地睇完人妖 SHOW..問我地D人妖有冇得傾帶返酒店....聽到都暈左..問佢點解咁有興趣... ...

Mr. Shark...  ng..... is that person is you???? OH~~~~
53#
 樓主| JerryLeung12 發表於 2012-1-16 23:17:37 | 顯示全部樓層
自由人 發表於 2012-1-16 23:08
佢可能做咩都慢.....得一樣最快................

唔系牙,要改esc 軟件牙及加强船內部結構中,死鯊魚用鎗射死你╮(╯▽╰)╭
54#
 樓主| JerryLeung12 發表於 2012-1-17 00:03:41 | 顯示全部樓層
o(∩_∩)o 好!
55#
 樓主| JerryLeung12 發表於 2012-1-19 14:09:16 | 顯示全部樓層
自由人 發表於 2012-1-19 14:01
喂,,,喂,,喂......今日年廿六喇.......D功課做成點呀......
(夾吓你先......) 星期日等你呀..... ...

50%-60% la, waiting a chips from england
56#
 樓主| JerryLeung12 發表於 2012-1-19 14:09:46 | 顯示全部樓層
sunday morning i will play Paula III
57#
 樓主| JerryLeung12 發表於 2012-1-19 14:34:29 | 顯示全部樓層
自由人 發表於 2012-1-19 14:32
即係新年落唔到水啦...........

系牙,機會很細。
58#
 樓主| JerryLeung12 發表於 2012-1-19 14:40:57 | 顯示全部樓層
自由人 發表於 2012-1-19 14:38
.............................咁你新年都唔放嫁啦....

Paula III law, i also very like this boat HAHA
59#
 樓主| JerryLeung12 發表於 2012-1-19 14:56:05 | 顯示全部樓層
自由人 發表於 2012-1-19 14:43
我地放年廿九,初二,初三.....( 初一我都應該會放...)

If chips can send to my home tomorrow , 初一 maybe can complete a white body New Tug
60#
 樓主| JerryLeung12 發表於 2012-1-26 14:06:45 | 顯示全部樓層
Some update : 26 Jan 2012

您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-5-13 23:48 , Processed in 0.389032 second(s), 18 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表