HOBBYWING 好盈電子變速器玩家專區：

seven 發表於 2013-1-23 22:30

                               
登錄/註冊後可看大圖

係HW V2.0/V2.1時, 會有Boost Acceleration (簡稱ACC), 即係Boost既加速率
現在V3.0/3.1, 呢個加速率要計

Tks 7 hing.

Ching,
Just my own case for your reference.
I have 5 HW ESC actively being used - V2.1(60, 90 and 120A) and Ezrun x 2.
I have to turn off 低電壓 protection for all 5 ESCs to get rid of the situation you descrbe above.
By doing so, you have to make sure you play within a reasonable time in order not to get your Lipo over discharged. What is a reasonable time depends on your electronics combination and FDR. Try and measure - this will need to be done quite a few times. Happy trying.

wolf 發表於 2014-1-4 04:10
thx a lot ching information. according to your case about hobby wing esc, it means the low voltage ...

Ching, forgot to mention that I have to turn off temp protection as well to enable continuous play.In my case I can play around 10 mins with below:
Zero s FDR 8.0
motor 7.5T with T+B = 60
6000mah 60c lipo
Motor and ESC temp less than 40c in Decemeber.
In your case, I guess you better get a lipo at least with 40c or above.
Just personal idea for your reference.
I think HW is a good value for money product.

kennyf1 發表於 2014-12-5 14:13
SOFTWARE UPGRADE左 V3.43 之後見到V3.0_131205STOCK

Thanks Kenny Hing.
DO you know what is improved in this new FW V3.0_131205STOCK for V2.1?

kennyf1 發表於 2014-12-5 14:59
吾知道改左D咩

I tried to read the Car ESC FW history but cannot find this version.

CAR_ESC_readme.txt
Firmware Revision History: