Phoenix 4WD Buggy

sandblasting: a process to blast abrasive under pressured air

aattaa 發表於 2014-8-29 23:34
不算呢, 如果要全翻新好多細零件都要拆出來攪,現在只是拆前後波箱翻噴.

另外早前有台灣師兄話這架車是全 ...

This car was before Landjump.

Phoenix 4wd was featured in the second issue of HK RC model magazine.

Landjump was later.

I always wonder how this Phoenix runs....

you wanna have good result, the particles should be about 50 micron. There are aluminium oxide, plastic beads, etc..

emaxxyeung 發表於 2014-8-30 12:50
師兄，原來世界第一部4WD  油Buggy就係佢。
甘世界第一部電Buggy係邊部呢？

Depends on how 'buggy' is defined. If we are talking about off-road cars, then 1/10 EP will be Tamiya Cheetah and XR311. (or even some earlier Kyosho cars)

If 'buggy' is really defined as 'buggy' then it got to be Tamiya Rough Rider.

This phoenix has differential?? center differential?? front one way??

Can c-hing describe the mechanical design of the transmission? Thanks

aattaa 發表於 2014-9-1 16:16
架Phoenix 是無差速無中差無單向的, 我拆開頭波箱,是簡單的中軸連接傘齒再轉减速大齒出狗骨杯.可能當年一 ...

Thanks for the info. Wonder how it drives

aattaa 發表於 2014-9-2 19:42
寄倉是可以的, 但我已入到安檢,出吾返去寄倉. 雖然個安檢吾比我過,但又出奇咁幫手!幫我四維搵一字批,十字 ...

How much does it weight??

4kg not too bad la many buggies are heavy.

First 4wd EP buggy should be Hirobo City

Hirobo was released in early 1983, Yokomo YZ834B was just a little later.