swift,工作進行中!

卒之有時間開下工la!

                               
登錄/註冊後可看大圖

Add oil!!

估唔到既係手掃油好難油..又唔可以開太希,d幼線好難搞,又要油深色先........haha, 結果唔知會點..哈!

                               
登錄/註冊後可看大圖

原帖由 lung 於 2006-7-3 04:25 PM 發表
cute

x2
really cute

What a nice cutie winnie, hurry up please, my neck is growing longer and longer!!

其實如果你用(細)樽裝油....唔開稀佢直接油上去會易控制d.....層油厚就係厚少少...但就做少好多麻煩o野.......

遇上幼線位...不如用paint marker油仲好過....油筆顏色又多...線條又夠粗幼統一嘛................

好Q...等睇你完成品

努力

搞左幾個鐘都係咁, 耐主要都係手掃油好耐先乾,....
paint marker...唔見有for lexan 既...

                               
登錄/註冊後可看大圖

[ 本帖最後由 nsx004 於 2006-7-4 00:55 編輯 ]

原帖由 nsx004 於 2006-7-4 00:52 發表
搞左幾個鐘都係咁, 耐主要都係手掃油好耐先乾,....
paint marker...唔見有for lexan 既...

                               
登錄/註冊後可看大圖

i said the paint marker is surely not for the lexan body.......u can find it in stationary /book store....
i used it b4 it's good for the look and also the handling.......

i found that u have made the masking for it......u r not going to spray it....u use hand painting.....how come u have to mask it??? waste your time la bro........

because the yellow are spray can and red are handpaint
NOW red color switch to spray can, so need to mask again

                               
登錄/註冊後可看大圖

[ 本帖最後由 nsx004 於 2006-7-4 23:40 編輯 ]

原帖由 monkichi0210 於 2006-7-4 12:31 發表


i said the paint marker is surely not for the lexan body.......u can find it in stationary /book store....
i used it b4 it's good for the look and also the handling.......

i found that u ha ...

呢隻得架 !

[ 本帖最後由 courel500 於 2006-7-4 23:57 編輯 ]

mark on surface or inner side?if in surface, easy tear off, on inner surface the paint overlay by the PS spray.....

                               
登錄/註冊後可看大圖

最後可能都係令大家失望呢......

                               
登錄/註冊後可看大圖

[ 本帖最後由 nsx004 於 2006-7-6 00:50 編輯 ]