Issue about balancing

I checked the left right balance of my F104, but raising the front of it and see if both wheel touch the ground at the same time. I found that left side is more heavy, which is not a surprise because the ESC and the wiring are on the left side...

but the problem is that I can only balance it by adding 100g to the right side... Is it too much? I did something wrong?

登錄/註冊後可看大圖

I think no need to add LEAD in the F1 wow .. .

nice  car !!!

some ching taught me weight balance is the basic.... no need for F1?

唔夠呀.....太小了

100g is not enough? how much I need?

why dont you put 2 or 4 scale to measure it, moreover, keep the lead in low position for CG ah

Yes Ching thanks for your advice!

其實去摩打 3 條線咁短仲要落蕉插會唔會影響到扭腰板既活動呢？

I spent a lot of time on the wiring so I believe it won't affect the 扭腰板.... but, in fact,  I don't know! I will test it on track tomorrow, let's see if it has uneven turn radius.

how was the test at jordan valley this morning?  

btw..  I love your mini-z rim, fatboy~

oh, i found the issue, it is not due to weight imbalance, it is due to the mounting socket of the T-Bar.... I found that it is not even on both side, I need to add a 戒子 to the left side mount of T-bar to solve this problem!