RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
查看: 4288|回復: 14
收起左側

Team losi Mini 8Eight

[複製鏈接]
hobbyhobby 發表於 2012-4-18 16:22:26 | 顯示全部樓層 |閱讀模式

遊客登錄

您需要 登錄 才可以下載或查看,沒有帳號?新玩家註冊

x
Team losi Mini 8Eight
 樓主| hobbyhobby 發表於 2012-4-19 02:46:25 | 顯示全部樓層
本帖最後由 hobbyhobby 於 2012-4-19 02:47 編輯


                               
登錄/註冊後可看大圖


GOFE14X01
Graphite Top Plate with Esc Mount Mini 8ight
This is a Pro Race Top Plate for the Losi 1/14 8ight.

FEATURES:
Carbon fiber construction
Black in color

YOU WILL RECEIVE:
One top plate with Mounting for Esc

REQUIREMENTS:
Installation onto vehicle

SPECIFICATIONS:
length: 168mm
width: 48mm
Thickness: 3mm
 樓主| hobbyhobby 發表於 2012-4-19 02:49:29 | 顯示全部樓層
本帖最後由 hobbyhobby 於 2012-4-19 02:49 編輯


                               
登錄/註冊後可看大圖


SOFE856
Steel Main Gear 56t Mini 8ight
This is the optional Hot Racing 56T Hardened Steel Spur Gear
for the Losi Mini 8ight RTR






FEATURES:

CNC Hardened Steel Construction






YOU WILL RECEIVE:

One 56T Hardened Spur Gear






REQUIREMENTS:

Installation on the Mini 8ight

 樓主| hobbyhobby 發表於 2012-4-19 02:50:55 | 顯示全部樓層
本帖最後由 hobbyhobby 於 2012-4-19 02:51 編輯



                               
登錄/註冊後可看大圖

parts for Losi 1:14 Mini 8ight 4WD buggy
SOFE858
Steel Main Gear 58t Mini 8ight
This is the optional Hot Racing 58T Hardened Steel Spur Gear
for the Losi Mini 8ight RTR




FEATURES:
CNC Hardened Steel Construction




YOU WILL RECEIVE:
One 58T Hardened Spur Gear




REQUIREMENTS:
Installation on the Mini 8ight




SPECIFICATIONS:
Teeth: 58
diameter: mm
Thickness: mm


This part is available for sale or distribution
through Hobby Etc., Inc in Nashua, New Hampshire, USA

 樓主| hobbyhobby 發表於 2012-4-19 02:52:26 | 顯示全部樓層
本帖最後由 hobbyhobby 於 2012-4-19 02:52 編輯

parts for Losi 1:14 Mini 8ight 4WD buggy


                               
登錄/註冊後可看大圖

GOFE28
Pro Race Graphite Fr. Shock Tower Mini 8ight
This is the optional Graphite Front Shock Tower for the
Losi 1/14 8ight

FEATURES:
Graphite construction, black in color
Direct fit hop-up requires no modification for use


YOU WILL RECEIVE:
One graphite front shock tower with Pro Race Setting


REQUIREMENTS:
Installation following the model manual


SPECIFICATIONS:
width: (48mm)
height: (40mm)
Thickness: 3mm


COMMENTS:
For the rear graphite shock tower order GOFE30



This part is available for sale or distribution

 樓主| hobbyhobby 發表於 2012-4-19 02:53:05 | 顯示全部樓層
本帖最後由 hobbyhobby 於 2012-4-19 02:53 編輯

parts for Losi 1:14 Mini 8ight 4WD buggy


                               
登錄/註冊後可看大圖

GOFE30
Pro Race Graphite Rear Shock Tower Mini 8ight
This is the optional Graphite Rear Shock Tower for the
Losi 1/14 8ight
FEATURES:
Graphite construction, black in color
Direct fit hop-up requires no modification for use

YOU WILL RECEIVE:
One graphite front shock tower with Pro Race Setting

REQUIREMENTS:
Installation following the model manual

SPECIFICATIONS:
width: (70mm)
height: (40mm)
Thickness: 3mm

COMMENTS:
For the front graphite shock tower order GOFE28

This part is available for sale or distribution


 樓主| hobbyhobby 發表於 2012-4-19 02:54:16 | 顯示全部樓層
本帖最後由 hobbyhobby 於 2012-4-19 02:54 編輯

parts for Losi 1:14 Mini 8ight 4WD buggy
OFE1901

                               
登錄/註冊後可看大圖


Alum. Castor Blocks Front Hub Mini 8ight
hese are the Aluminum Castor Blocks from Hot Racing for the
Team Losi 1/14 Mini 8ight
FEATURES:

CNC 6061-T6 Aluminum construction
Anodized black in color

YOU WILL RECEIVE:

Two Aluminum Castor Blocks


REQUIREMENTS:

Installation on the vehicle

SPECIFICATIONS:

length: 16mm
width:27mm
height: 33mm

This part is available for sale or distribution


 樓主| hobbyhobby 發表於 2012-4-19 02:55:32 | 顯示全部樓層
本帖最後由 hobbyhobby 於 2012-4-19 02:55 編輯

parts for Losi 1:14 Mini 8ight 4WD buggy
OFE2101

                               
登錄/註冊後可看大圖

Alum. Steering Knuckle Mini 8ight
This is the optional Aluminum Steering Block for the Losi Mini 8
FEATURES:

CNC aluminum Steering block anodized Black.

YOU WILL RECEIVE:

Two Aluminum Steering Block

REQUIREMENTS:

Installation on vehicle
This part is available for sale or distribution

 樓主| hobbyhobby 發表於 2012-4-19 02:56:26 | 顯示全部樓層
本帖最後由 hobbyhobby 於 2012-4-19 02:56 編輯

parts for Losi 1:14 Mini 8ight 4WD buggy
OFE2201

                               
登錄/註冊後可看大圖


Alum. Rear Knuckle Mini 8ight
This is the optional Aluminum Hub set for the Losi Mini 8
FEATURES:

CNC aluminum hub carriers anodized Black.

YOU WILL RECEIVE:

Two hub carriers

REQUIREMENTS:

Installation on vehicle
This part is available for sale or distribution


 樓主| hobbyhobby 發表於 2012-4-19 02:57:39 | 顯示全部樓層
本帖最後由 hobbyhobby 於 2012-4-19 02:57 編輯

parts for Losi 1:14 Mini 8ight 4WD buggy
OFE48G01

                               
登錄/註冊後可看大圖



Geaphite Bearing Steering Mini 8ight
This is the optional CNC Billet Alumimnu Bearing Steering Bell Crank
with graphite link plate Set for the Losi 1/14 8ight Off-Road Racer.




FEATURES:
alum construction, Black in color
Assembled and ready to install




YOU WILL RECEIVE:
Steering Bell Crank Set
One Graphite Tie Plate

Four ball bearing


This part is available for sale or distribution


 樓主| hobbyhobby 發表於 2012-4-19 02:58:30 | 顯示全部樓層
本帖最後由 hobbyhobby 於 2012-4-19 02:58 編輯

parts for Losi 1:14 Mini 8ight 4WD buggy
OFE311

                               
登錄/註冊後可看大圖



Front or Rear Hd Anti-Roll Bar Mini 8ight
This is the Anti Roll Bar Kit for the Losi mini 8ight


FEATURES:
Steel
Anti Roll Bar and CNC aluminum mount construction

YOU WILL RECEIVE:
Two Blue 1.6mm hard anti roll bar
Two silver 1.4 med anti roll bar
Two Red 1.2 soft anti roll bar
Four ball linkFour Aluminum mount

misc. mounting hardware & screws

This part is available for sale or distribution


 樓主| hobbyhobby 發表於 2012-4-19 02:59:22 | 顯示全部樓層
本帖最後由 hobbyhobby 於 2012-4-19 02:59 編輯

parts for Losi 1:14 Mini 8ight 4WD buggy
SOFE288

                               
登錄/註冊後可看大圖



Steel CVD Drive Shaft Mini 8ight
This is the optional Hot Racing CVD Kit for the Losi Mini 8ight


FEATURES:
Manufactured by Hot Racing for Losi Mini 8eight
Hardened steel construction, black in color
CVDs have near zero backlash for the most positive acceleration
possible

YOU WILL RECEIVE:
Two axles
Two bones
Two 1.5mm diameter cross pins
Two 1.6mm axle pins
Two barrels (couplings)

REQUIREMENTS:
Assembly and installation into the model

SPECIFICATIONS:
length: (60mm pin to pin) 89mm as assembled

COMMENTS:


This part is available for sale or distribution


 樓主| hobbyhobby 發表於 2012-4-19 03:00:23 | 顯示全部樓層
本帖最後由 hobbyhobby 於 2012-4-19 03:00 編輯

parts for Losi 1:14 Mini 8ight 4WD buggy
OFE10W01

                               
登錄/註冊後可看大圖



Clamp Hex drive Hub Mini 8ight
This is the Aluminum Hex Hub 12mm for use with the Mini 8ight.



FEATURES:
CNC Aluminum Construction.
Anodized Black in Color.
CNC Machined.
Secured with 2mm Cap Head Screw.



YOU WILL RECEIVE:
Four Aluminum 12mm Hex Hubs.
Four 2mm x 4mm Cap Head Hex Screws.



REQUIREMENTS:
Nothing.

This part is available for sale or distribution


 樓主| hobbyhobby 發表於 2012-4-19 03:01:30 | 顯示全部樓層
本帖最後由 hobbyhobby 於 2012-4-19 03:01 編輯

parts for Losi 1:14 Mini 8ight 4WD buggy
GOFE126

                               
登錄/註冊後可看大圖



Graphite Battery Holder Strap Mini 8ight
This is an optional Losi Pro Race Battery Strap for the 1/14 8ight.

FEATURES:
Carbon fiber construction
Black in color

YOU WILL RECEIVE:
One battery strap for the 1/14 8ight.

REQUIREMENTS:
Installation over battery compartment


SPECIFICATIONS:
width: (115mm)
height:
(15mm)
Thickness: 3mm


COMMENTS:


This part is available for sale or distribution


 樓主| hobbyhobby 發表於 2012-4-19 03:02:24 | 顯示全部樓層
本帖最後由 hobbyhobby 於 2012-4-19 03:02 編輯

parts for Losi 1:14 Mini 8ight 4WD buggy
SD9T3

                               
登錄/註冊後可看大圖

12 pieces AR Metric Foldup Pocket tool kit
This is the 12 pieces RC Metric Foldup Pocket tool kit form Hot Racing
The Always Ready Foldup tool is always right by your side when you need it.

FEATURES:
Aluminum and Steel construction: High Torque Steel
Clips to your belt loop
The rotation feature: 90 stop feature converts the tool into
a non-stop, time-saving spin wrench.


YOU WILL RECEIVE:
One 12 Piece Fold Up Tool Set
One belt loop Clips
One protective bag


SPECIFICATIONS:
PHILLIPS: -
1)PH00,
2)PH0


FLATHEAD: -
3)3mm Slotted

HEX DRIVERS: -
4)H1.5
5)H2
6)H2.5


您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-3-29 21:42 , Processed in 0.087913 second(s), 16 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表