Tamiya RM-01 full option

What gear ratio and battery (what mAh) you used? Can play for how long? Thanks sharing!

回復 Zenki 的帖子

IP 6200 3.7V, Dualsky 8.5D stock motor (around 4000KV), 96/35, over 8 minute

96/35 ? any over heat

回復 albertau2011 的帖子

for 1 cell no problem, coz is 8.5T motor

macau-rc 發表於 2012-7-5 09:44

                               
登錄/註冊後可看大圖

昨晚第一次玩，感覺良好，只是roll damper油希左d，見意頭4mm螺絲換長d。

好毒，聽日買返部解毒先

macau-rc 發表於 2012-7-5 09:44

                               
登錄/註冊後可看大圖

昨晚第一次玩，感覺良好，只是roll damper油希左d，見意頭4mm螺絲換長d。

GT300喎~

macau-rc 發表於 2012-7-5 09:44

                               
登錄/註冊後可看大圖

昨晚第一次玩，感覺良好，只是roll damper油希左d，見意頭4mm螺絲換長d。

C Hing, roll damper   用 ? 油 , 20000?

Trinity 30WT, now change to 45WT

macau-rc 發表於 2012-7-5 11:33

                               
登錄/註冊後可看大圖

回復 Zenki 的帖子

IP 6200 3.7V, Dualsky 8.5D stock motor (around 4000KV), 96/35, over 8 minute

Which barnd are you using for the Supr Gear, Diff Ball and Diff Ball Plate?

Diff ball and diff ball plate are original, Supr Gear is Kawada

請問RM-01放唔放到2CELL的LIPO?

放到2CELL short pack

macau-rc 發表於 2012-7-12 18:08

                               
登錄/註冊後可看大圖

Diff ball and diff ball plate are original, Supr Gear is Kawada

ar ha, thx for ur reply!

用到其它廠呔呤?

用到, rear is std, front change 8x5F bearing can use 其它廠呔呤

Or........

54366 RM-01 Front Upright Shaft (for 1/8x5/16 Inch Bearing)
The upgraded upright shafts are a replacement of the standard shafts used in the stock plastic uprights. These allow the use of aftermarket 1/12th scale wheels that use the 1/8 x 5/16th inch bearings. The standard wheel axle uses metric size bearings for use on Tamiya wheels. The use of inch size bearings will open up the racers options.

macau-rc 發表於 2012-7-12 18:08

                               
登錄/註冊後可看大圖

Diff ball and diff ball plate are original, Supr Gear is Kawada

Kawada spur gear for RM-01 (#TRM03; 88T0-100T), right?

扭腰油壓可改裝用於肉都無？

我買了yokomo 12仔後呔但裝到RM01身上點解?

gx2081 發表於 2013-2-1 02:51

                               
登錄/註冊後可看大圖

我買了yokomo 12仔後呔但裝到RM01身上點解?

http://rc-evo.com/xbbs/forum.php ... hlight=yokomo%2Br12

因為係YOKOMO 專用