carbon lipo AE86

原帖由 billy86che 於 2007-1-15 12:15 PM 發表


How big? Which one? I guess I use only normal type.

14th floor , the left one

原帖由 terencelyl7411 於 2007-1-15 15:11 發表

14th floor , the left one

唔明, please explain

原帖由 billy86che 於 2007-1-15 04:16 PM 發表


唔明, please explain

十四樓，最左邊果架

原帖由 terencelyl7411 於 2007-1-15 16:20 發表

十四樓，最左邊果架

你講嘢真係好簡潔.
有冇相?

[ 本帖最後由 billy86che 於 2007-1-15 18:00 編輯 ]

原帖由 billy86che 於 2007-1-15 05:48 PM 發表


你講嘢真係好簡潔.
有冇相?

                               
登錄/註冊後可看大圖

最左果架

原帖由 terencelyl7411 於 2007-1-14 19:38 發表
睇下 billy 魔打上面粒電容大到！？

They are normal motor capacitors. See this picture.

原帖由 billy86che 於 2007-1-15 20:30 發表


They are normal motor capacitors. See this picture.

Yes, he used mono caps which are different from the common ones( c caps).

原帖由 billy86che 於 2007-1-15 08:30 PM 發表


They are normal motor capacitors. See this picture.

O ，我以為魔打開孔果度係粒電容系 tim

原帖由 KamSing 於 2007-1-15 20:43 發表


Yes, he used mono caps which are different from the common ones( c caps).

They are just a little more expensive. You can buy dozens of them at a very low price in Ap Liu Street

原帖由 billy86che 於 2007-1-10 23:04 發表
Diy car 3 & 4

個粉紅色摩打座係?

原帖由 韓哥 於 2007-1-19 17:34 發表



個粉紅色摩打座係?

It is similar to this:
(a shortened motor mount from GxM)

can you po more pic?


我广州嘅……5该5该……

I'm glad to. See if tonight I'm free.

thx!

servo is from futaba (3110)

modified gear so I can fit wider rear tyres (up to 14mm)

The running weight is less than 160 grams so I added 10 grams to lower the CG at that time when I took the photo. I now have 15 extra grams on the bottom, making the car weighing about 170 grams in total.

I added caster to the front.

some camber to the front so I don't need to buy camber front carrier. In fact, they are not the same in nature.

the lipo battery cells are laid down as shown to achieve the lowest CG possible.