Mini Z question

Well, hello, I want to play mini  z again
I own a MR01, I think, but I totally messed up with my esc, If I want to buy a new one, how much?


so I want to ask the following:

1-What are the differences between MR-01, MR-015, MR-02 (mm, rm?) and awd. Basically, all models.
2-How much is the esc? for awd and rwd, or can I use it on both?
3-I saw some drifting mini z, so what kind of tires will I need? (I don't want to ones drift too easily)

thanks for answer

By the way, just because I type in English, doesn't mean you have to answer me in English

ESC's are basically all compatible, although the layout maybe be sliiiiiightly different.

the minimum chasis width for mr02 is 5mm wider than AWD/mr01/mr015
this gives u a constraint in using bodies on mr02

the minimum lenght of a mr02/015-MM chasis is 98mm (94mm if using aftermarket parts)
this gives u a constraint in using bodies on MM chasis.

drifting mini-zs are AWDs, basically AWD is a 4WD mini-z, around 30% more costy than mr02/015's

a set of mr02/015 is around $8xx, while AWD $10xx

btw, don't buy an esc, not worth it.

and AWDs...either they drift all the time or they don't, depends on the setting, haha ~

原帖由 800mah 於 2007-1-14 01:22 發表
...
the minimum chasis width for mr02 is 5mm wider than AWD/mr01/mr015
this gives u a constraint in using  ...

so which means... I can still use the MR01 bodies on AWD?
... because I really want to use that golf gti

thanks



If, only if, my awd esc is all mess up, then... buying a band new one is better than buy the esc alone? Or change the chassis layout and use novak's spy? compare, the spy and the mini z esc, the spy is much cheaper, right?

the best way to save in your case is to get a mr-015 chasis only set $5xx i think. then u can use almost all of your mr01 stuff on the mr015, (most, not all)
also u get slightly improved performance.

or u can simply go buy the Golf mr015 ready set when it comes out.

原帖由 800mah 於 2007-1-14 02:06 發表
the best way to save in your case is to get a mr-015 chasis only set $5xx i think. then u can use almost all of your mr01 stuff on the mr015, (most, not all)
also u get slightly improved performan ...

well, I just heard that MR01 is hard to drift, though.

only AWD can drift.

原帖由 800mah 於 2007-1-14 02:20 發表
only AWD can drift.

MR01都得(尾拖住頭,轉做前驅車,後轉向)

[ 本帖最後由 hoitang55 於 2007-1-14 10:40 編輯 ]

原帖由 hoitang55 於 2007-1-14 10:30 發表

MR01都得(尾拖住頭,轉做前驅車,後轉向)

what do you mean by that?
and picture?

thanks

原帖由 lceriyirri 於 2007-1-14 11:33 發表



what do you mean by that?
and picture?

thanks

可以唔多洗理佢
教壞你

原帖由 <i>hoitang55</i> 於 2007-1-14 10:30 發表<br />
<br />
MR01都得(尾拖住頭,轉做前驅車,後轉向)

<br />

..... 你目已咁玩好啦 -___-"

does 1/10 esc or receiver or radio can be used on miniz?

原帖由 vrally582 於 1/2/2007 02:35 PM 發表
does 1/10 esc or receiver or radio can be used on miniz?

sure~

原帖由 vrally582 於 2007-2-1 14:35 發表
does 1/10 esc or receiver or radio can be used on miniz?

其實miniz既pcb已經係combine左esc,reciver and servo
你1:10既電子野咁大件
擺去邊?
唔係唔用得
係擺唔落

u can simply go buy the Golf mr015 ready set when it comes out.

how about the controller. all AM controller can be used right?

Do you mean transmitter?

If so, most transmitters (Futaba, Ko Sanwa) should work if you choose AM.

[ 本帖最後由 billy86che 於 2007-2-5 13:14 編輯 ]