My GT01 Porsche 934

原帖由 minimini 於 2007-1-24 01:14 發表


likely bro gibson will wait for the original Tamiya green color arrives.......

but this color is most match the original color. 效果跟尾翼有99%接近!!!

well done bro. RC,for other bro. without "spray gun" like me,still need to wait

原帖由 RC 於 2007-1-24 00:05 發表
Body color use Faskolor Fasaqua, wheel color use X12 gold leaf,
lighting front 5mm dia 2xwhite led + 3mm dia 2xorange led + 3mm dia 2xblue led,
rear 5mm dia 2xred led + 3mm dia 2xwhite led + 3mm  ...

hi bro,

So, Fasaqua is the color name???

我都想知呢支ink個color no. or 名？
買到我吳等PS果支啦
等左好耐都未到。
快快手開個pump噴左佢算數

原帖由 buggy 於 2007-1-24 11:31 發表


hi bro,

So, Fasaqua is the color name???

yep!!

Update Photo add yellow color window mask

[ 本帖最後由 RC 於 2007-1-27 00:21 編輯 ]

嘩, 好正呀, 我遲D 都會買, 可唔可以泊埋部1/10 車隔離睇0下SIZE 差幾遠呢?

Brother RC~~~Good job, . Very beautiful

擒日切完。D 部件又奇形有DD複雜。我切到最尾時，個磨打保護架同個油壓架係離開1-2MM的。再裝"防滾架"時，螺絲才把他們拉埋一起。你們的是否都一樣？因為有部份D膠好臨，唔知我有無扭曲左佢地。

Hi Buggy,
I have same problem, but don't to try to tight it more
it will bend the shock plate.
I use a washer to shim the gap.

hi fyin,

thanks for your reply.