RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
查看: 1489|回復: 10
打印 上一主題 下一主題
收起左側

AD band pcb

[複製鏈接]
跳轉到指定樓層
1#
2slow 發表於 2007-3-15 10:55:48 | 只看該作者 回帖獎勵 |倒序瀏覽 |閱讀模式

遊客登錄

您需要 登錄 才可以下載或查看,沒有帳號?新玩家註冊

x
1) Where can I buy the AD band PCB only? how much?
2) Does it comes with power switch and VR?
3) Can I install it to AWD?

唔該各位師兄...
2#
billy86che 發表於 2007-3-15 11:01:27 | 只看該作者
原帖由 2slow 於 2007-3-15 10:55 發表
1) Where can I buy the AD band PCB only? how much?
2) Does it comes with power switch and VR?
3) Can I install it to AWD?

唔該各位師兄...


1. KWS at about $6XX. (has become more expensive)
2. Yes.
3. Yes, but with some modification.
3#
 樓主| 2slow 發表於 2007-3-15 11:06:48 | 只看該作者
原帖由 billy86che 於 2007-3-15 11:01 發表


1. KWS at about $6XX. (has become more expensive)
2. Yes.
3. Yes, but with some modification.



1. only PCB without the module? what about PCB with AD module?

3. what modifications is needed? can you describe it or show some photo?

Thanks...
4#
billy86che 發表於 2007-3-15 11:13:37 | 只看該作者
原帖由 2slow 於 2007-3-15 11:06 發表



1. only PCB without the module? what about PCB with AD module?

3. what modifications is needed? can you describe it or show some photo?

Thanks...


1. Without module still costs us $6XX.

3. Remove or move the white plug  installed on the pcb(used to connect to computer).
5#
 樓主| 2slow 發表於 2007-3-15 11:19:36 | 只看該作者
原帖由 billy86che 於 2007-3-15 11:13 發表


1. Without module still costs us $6XX.

3. Remove or move the white plug  installed on the pcb(used to connect to computer).



1. what about PCB with module then, which shop in KWS have it?

3. White plug for connecting computer? so that means I can't tune it anymore?


Many thanks billy86che
6#
billy86che 發表於 2007-3-15 11:23:53 | 只看該作者
原帖由 2slow 於 2007-3-15 11:19 發表



1. what about PCB with module then, which shop in KWS have it?

3. White plug for connecting computer? so that means I can't tune it anymore?


Many thanks billy86che


1. In the old days, also $6XX. (It is nonsense.) Haven't seen it recently.

3. You can resolder it on the back of the PCB or you can wire it out and fit in at the rectangular hole on the chassis. (Kyosho has prepared something.)

[ 本帖最後由 billy86che 於 2007-3-15 11:30 編輯 ]
7#
 樓主| 2slow 發表於 2007-3-15 11:29:42 | 只看該作者
原帖由 billy86che 於 2007-3-15 11:23 發表


1. In the old days, also $6XX. (It is nonsense.) Haven't seen it recently.

3. You an re solder it on the back of the PCB or you can wire it out and fit in at the rectangular hole on the cha ...


1. I see, will go check it out later.

3. wish someone can show me some photo..


Thanks anyway
8#
tonytjia@zone 發表於 2007-3-15 11:52:41 | 只看該作者

回復 #1 2slow 的帖子

萬里有AD PCB賣 價大約$5xx
極速 AD PCB + Module + AD Band Crystal 價$700
我會建議你買 ADPCB + Module + AD Band Crystal 因為祇係$700

ADPCB 有VR, Servo motor 及開關

如果你要裝向AWD度要改長開關線及電池到PCB條線

Servo motor 正負線要交換

同埋chassis要cut小小先裝到
9#
 樓主| 2slow 發表於 2007-3-15 11:56:32 | 只看該作者
原帖由 tonytjia@zone 於 2007-3-15 11:52 發表
萬里有AD PCB賣 價大約$5xx
極速 AD PCB + Module + AD Band Crystal 價$700
我會建議你買 ADPCB + Module + AD Band Crystal 因為祇係$700

ADPCB 有VR, Servo motor 及開關

如果你要裝向AWD度要改長開關 ...



哦~ 自已整容易嗎? KWS有無shop可以幫我裝呢?

Thanks
10#
billy86che 發表於 2007-3-15 13:14:35 | 只看該作者
原帖由 2slow 於 2007-3-15 11:56 發表



KWS有無shop可以幫我裝呢?

Thanks


Probable. Go and ask.
11#
tonytjia@zone 發表於 2007-3-15 15:00:16 | 只看該作者

回復 #9 2slow 的帖子

我都係自己整
第一次整可能會耐D大約一小時
我等二架整左半個鐘
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-5-9 14:13 , Processed in 0.089659 second(s), 15 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表