请问轮毅每多1.0轮距单边会多出多少毫米?

请问轮毅OFFSET每多1.0轮距单边大概会多出多少毫米?

原帖由 ak47p 於 2007-11-20 13:45 發表

                               
登錄/註冊後可看大圖

请问轮毅OFFSET每多1.0轮距单边大概会多出多少毫米?

Use a ruler.

我只有0度的,..................................

原帖由 ak47p 於 2007-11-20 13:45 發表

                               
登錄/註冊後可看大圖

请问轮毅OFFSET每多1.0轮距单边大概会多出多少毫米?

If the wheel is labelled 1.0, the offset is 1mm wider on one side. The total offset should be 2mm in addition to the original width.

I measured one of my Awds. The rear wheels(wide) are labelled 1.5. I got a 74mm(approx.) rear offset. Is this useful?

[ 本帖最後由 billy86che 於 2007-11-21 07:18 編輯 ]

By the way, I am very interested in the term "轮毅". Starting from when have people in our country used this term? I found 332 results of this term in simplified Chinese on the Yahoo search and 72 in traditional Chinese. Does it mean "wheel" or "rim"? Teach me please.

I am happy with people using simplified Chinese and reading simplified Chinese myself. But I still think 'Putonghua', as the term suggests, is supposed to be understood by all Chinese, both in mainland and overseas. That's why I wish to clarify all uncertainties.

[ 本帖最後由 billy86che 於 2007-11-21 13:06 編輯 ]