can anyone explain this ?

this is a stock motor from 2.4G kit
點解黑線同摩打中間多左件野既 ??

係咪減noise牙?

An other capacitor?  May be just like some 540 motor that got three caps.

diode ?     　　

[ 本帖最後由 stig 於 2008-4-16 21:13 編輯 ]

原帖由 stig 於 2008-4-16 21:12 發表

                               
登錄/註冊後可看大圖

diode ?　　　　

no....it isn't a diode~

it used for prevent overheat , the new verson of AWD also have this
(I think better remove this , just i think)

這是保險絲,用來防止底板輸出過大.

原帖由 terencelyl7411 於 2008-4-16 21:13 發表

                               
登錄/註冊後可看大圖

it used for prevent overheat , the new verson of AWD also have this
(I think better remove this , just i think)

i've removed the whole motor

thanks guys~ so this is just like a fuse, right?

原帖由 <i>800mah</i> 於 2008-4-16 09:40 PM 發表 <a href="http://bbs.rc-evo.com/redirect.php?goto=findpost&pid=811375&ptid=78104" target="_blank"><img src="http://bbs.rc-evo.com/images/common/back.gif" border="0"   alt="" /></a><br />

<br />

<br />
i've removed the whole motor <img src="images/smilies/default/titter.gif" smilieid="9" border="0" alt="" /> <br />
<br />
thanks guys~ so this is just like a fuse, right? <img src="images/smilies/default/smile.gif" smilieid="1" border="0" alt="" />

<br />
ha ~ that's what i expect you'll do so

上星期有位師兄上車場開左套 2.4Ghz, 就係用埋呢隻新白皮豬加 " 大包米 " cap 跑.

Okay ga wor, 比起當年 3004 X 2  加白皮豬快好多, 爆好多. 我念住拆佢出來焊落隻 Stock R 到睇下會點.

" 大包米 " Xspeed for AWD

ar tam , wanna ask you that the 2.4G PCB is come with what kind of FET ??

This should be the same 'fuse' commonly found on AWD kit without the T/X.  

I often times see new drivers with this thing on their AWD xspeeds, only to find their cars stop in the middle of the track due to over-current.  I would strongly recommend to try removing this part to gain higher performance, especially if you want to upgrade your fets.  

For cap, PN do offer two different types of cap, and one will see decent performance gain with the new large 'flat' cap.  The upside will be more obvious towards the end, when use with battery that will drop Volt soon after the first few minutes.

原帖由 terencelyl7411 於 2008-4-16 22:56 發表

                               
登錄/註冊後可看大圖

ar tam , wanna ask you that the 2.4G PCB is come with what kind of FET ??

4 X 3010 FETS but last week I switched to 4 X SP8M4 since Ah Kie was there in the track.

Yesterday I bought PN Racing ft tower bar & roll bar.

Next week what should I buy ?

原帖由 GTRTam 於 2008-4-16 22:41 發表

                               
登錄/註冊後可看大圖

上星期有位師兄上車場開左套 2.4Ghz, 就係用埋呢隻新白皮豬加 " 大包米 " cap 跑.

Okay ga wor, 比起當年 3004 X 2  加白皮豬快好多, 爆好多. 我念住拆佢出來焊落隻 Stock R 到睇下會點.

what is 'Stock R' ?? 脫晒節添...
and what is 大包米 X-speed ? how much is it. maybe i want one for my AWD.

Stock R is a new stock motor from Atomic, using the endbell design like 540 motor with carbon brushes with shunts & loaded with springs.

It's fast enough on MR02.

I call 大包米 is a cap or diode ( don't really know what it's ) was found in KoPropo couple years ago when playing 1/10. It's soldered on the motor + & -. Some people said it makes the ESC cooler, some say it gives more punch that I ready don't know. The one on all these new series motor for Mini-Z has this thing similar to the one on 1/10.

原帖由 <i>GTRTam</i> 於 2008-4-16 11:22 PM 發表 <a href="http://bbs.rc-evo.com/redirect.php?goto=findpost&pid=811545&ptid=78104" target="_blank"><img src="http://bbs.rc-evo.com/images/common/back.gif" border="0"   alt="" /></a><br />

<br />

<br />
4 X 3010 FETS but last week I switched to 4 X SP8M4 since Ah Kie was there in the track.<br />
<br />
Yesterday I bought PN Racing ft tower bar & roll bar.<br />
<br />
Next week what should I buy ?

<br />
that's mean the original PCB can compatiable with most of the motor in the market , not bad ~!
you should buy an EX-1UR and wait for the 2.4G module

ar tam, you've got a lot of upgrade parts wor. do you come by friday night?

btw. 英國仔 show up la. or you go to mms by sat.?

long time no go la , maybe tmr night go