[ 本帖最後由 呀陽乂 於 2009-2-23 20:25 編輯 ]作者: magiceye 時間: 2009-2-22 21:20
KT-18重有一個大問題, 佢條回中推桿個鉸位好緊, 有機會玩得多磨到起粉, 嚴重嘅話會斷, 我就試過玩玩吓個呔突然冇o左回中, 打散支槍就發現呢個問題. 最衰係支推桿個鉸釘黐唔到, 要買過一支. 我係新槍D鉸位加油, 以防萬一.作者: dickyxx 時間: 2009-2-22 22:50
haha, me too. add some oil to the Axle, that is great,作者: dickyxx 時間: 2009-2-22 22:53
if the Axle was broken, you don't need to buy new one, you can fix it. you can use the metal pin or screw instead of the plastic pin, I had been repair 2 time of the same case,作者: kin12334 時間: 2009-2-22 23:38
- -kt 18真多問題@@作者: ipwaikuen 時間: 2009-2-23 18:31
我試過 reset 支控, 但都唔成功. 支控而家好似 halt o左機咁, power on o左按任何 buttons 都冇反應, 又冇聲...
唔知呢支控有冇得 hard reset?作者: gogoyo123 時間: 2009-2-23 20:13