RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: My Xpress mini Twin [打印本頁]

作者: SamsonSung 時間: 2009-5-26 21:49
標題: My Xpress mini Twin
I just finish build up two cars. Would like to share some photos with all of mini lover.

作者: gary 時間: 2009-5-26 22:01
good~~~~

作者: samhang81 時間: 2009-5-26 22:09
2部車都好新好乾淨wo

作者: gavl 時間: 2009-5-26 22:36
落地玩未？

作者: SamsonSung 時間: 2009-5-26 22:36
Mrr2 with 4000kv,
Mini Pro with 3000kv,
Mrr2 turn shaper than the Mini pro.
I can't wait to go to TC test it.

作者: rc2006 時間: 2009-5-26 22:40
Very nice, eager to see your report on their performance in TC.

作者: gary 時間: 2009-5-26 23:38
3# samhang81
因兩部車一行就會散..ha..ha...

作者: bigcow 時間: 2009-5-26 23:59
條令好sharp,正!

作者: gavl 時間: 2009-5-27 00:10

Mrr2 with 4000kv,
Mini Pro with 3000kv,
Mrr2 turn shaper than the Mini pro.
I can't wait to go to TC test it.
SamsonSung 發表於 2009-5-26 22:36

登錄/註冊後可看大圖

and what kind of tyre u r using?

作者: SamsonSung 時間: 2009-5-27 09:58
Gavl:
I use ABC'N' tire on Front, and RP36r on rear.
But summer is to hot, tire is easy over heat, I will try 40R for both later.

作者: SamsonSung 時間: 2009-5-27 10:04
Gary:
To be honest, the Mrr2 is strong. I hit the car many time and it still up to running.
Only part I buy to replace is rear lower arms. And tamiya ball cup.

作者: leohouse 時間: 2009-5-27 15:07
11# SamsonSung

Very Good Wu ! I will Build my TT-01 Mini play with you !

作者: tongto1 時間: 2009-5-30 06:14
GOOD......

作者: 大實力 時間: 2009-5-30 17:37
c兄...我都有部舊mini xpress..不過散晒...想問下d零件邊度有?!我想搵個直電架同皮带...唔知kws重有無呢?!

作者: SamsonSung 時間: 2009-5-30 23:18
大實力 :
直電架同皮带 can buy at www.RCmart.com
I try the car at TC. It is very stable and easy to drive.

作者: 大實力 時間: 2009-5-30 23:55
唔該晒你呀C兄

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://rc-evo.com/xbbs/)