The first casualty was David Tse running in the F1 class who was in a different league on a 17lap pace but stopped in lap10 with radio failure.
Both Finals started under dry condition with all the cars starting with foam tires and some high speed battle were expected.
F1 Class:
David Tse equipped with new Yeah Racing motor mount and suspension set starting from 3rd jumped up to 2nd but pole sitter Yo{banned}sugu Takahashi closed the door causing both drivers to drop to the back of the order. Shinya Sakurao led the race followed by Atsushi Nakayama and Ito who started from 9th. This formation continued for about 10 laps and David Tse fought back from last position was already on Ito’s tail. The nose to tail battle between Seiji Ito and David Tse lasted for a few laps and David Tse sensationally got passed both Seiji Ito and Atsushi Nakayama at the same corner to take the lead and win his debut race.
F1 Class results:
1. David Tse (Tamiya-Yeah Racing)
Description:
- The 1/8-scale 8IGHT-T 2.0 Truggy offers big performance and an even bigger list of features. Team Losi Racing has taken the most innovative, revolutionary 1/8-scale nitro truggy design in racing history and made it even better, with engineered features and design elements that surpass every other truggy on the market
- RC 1:8, Truggy, Nitro-Powered, Off Road, Almost-Ready-To-Run ARTR
Features:
- Extended Chassis with Tuned Flex Technology (TFT) 2.0
- Precision steering geometry and servo saver
- Extended-length front and rear arms
- Updated suspension geometry with longer front and rear shocks
- Heavy-duty dogbones and outdrives
- Heavy-duty front and rear brake disks
- Lightened shock towers
- Sure-Close™ fuel tank closure with EFRA approved fuel line kit included
- 50T Center spur gear
- Revised radio tray design
- Heavy-duty rear outer 3.5mm hinge pins
- Reinforced rear bearing insert system
- Laser etched engine mounting guides
- Center driveshaft grease boots
Description:
- Incorporating real engineering elements from full-size rock crawling competition, the 1/10 Comp Crawler Race Roller represents the pinnacle of RC rock crawling design. The Comp Crawler offers several innovative features including a DIG transmission, solid axles with a worm gear drive, front and rear locking differentials, a 4-link suspension and so much more.
- RC 1:10, Crawler,Electric-Powered, Off Road.
Where to buy Team Losi 1/10 Comp Crawler Race Roller??
Feature:
- COMPACT FRONT & REAR LOCKING (DIG) CENTER TRANSMISSION ALLOWS THE CRAWLER TO OVERTAKE OBSTACLES WITH EASE
- FRONT AND REAR SOLID AXLE WITH WORM GEAR DRIVE
- FRONT AND REAR LOCKED DIFFERENTIAL PROVIDES FULL TIME 4WD
- 4-LINK SUSPENSION MINIMIZES REAR AXLE SWING,ALLOWING FOR MORE PRECISE HANDLINGPIECE 2.2〃 BEAD LOCK WHEELS WITH ALUMINUM OUTER RINGS
- 2.2 LOSI ROCK CLAWS TIRES WITH FOAM INSERTS
- 4〃 ALUMINUM THREADED SHOCKS WITH TITANIUM NITRIDE (TiNi) SHAFTS ALLOW THE SUSPENSION TO ARTICULATE WITHOUT ANY BINDS
- DURABLE CV FRONT AXLE SHAFTS ALLOW FOR INCREASED STEERING RANGE
- TWIN VERTICAL PLATE CHASSIS WITH ADJUSTABLE SHOCK MOUNTS
- ZERO ACKERMAN STEERING PROVIDES CLASS LEADING PERFORMANCE WITH 45 DEGREES OF STEERING THROW
- ALUMINUM UPPER AND LOWER SUSPENSION LINKS FOR ADDED STRENGTH
- RACE ROLLER CHASSIS IS PREASSEMBLED; SIMPLY
ADD ELECTRONICS, PAINT AND GO
Numbers of TRAXXAS R/C model parts for monster truck (REVO, SLAYER, SLASH) has just restocked rcMart.com! Please check the list below for your desired Traxxas parts:
Spare Parts For Traxxas Slash
1918 Gear, 18-T pinion (48-pitch) / set screw
1951 Half shafts, long truck (external-splined (2) & internal-splined (2)/ metal
2381 Main diff gear w/side cover plate & screws 10 2.10 2 1.00
2382 Planet gears (4)/ planet shafts (4)/ sun gears (2)/sun gear alignment sh
2423 Gear, 23-T pinion (48-pitch) / set screw
2431 Gear, 31-T pinion (48-pitch) / set screw
2458 Springs, front (black) (2)
2458A Springs, front (white) (2)
2555 Suspension arms, (rear) (2)
2742 Rod ends, long (6)/ hollow ball connectors (6)
2753X Stub axles, rear (2)
3195 Top drive gear, steel (22-tooth)
3631 Suspension arms (front) (2)
3632 Caster blocks (l&r) (30-degree)
3637 Axles (front) (2)
3639 Shock tower (front)
3640 Suspension screw pin set, steel (hex drive) (requires part # 2640 for a c
3691 Gearbox halves (l&r) (black) w/ idler gear shaft
3691A Gearbox halves (l&r) (grey) w/ idler gear shaft
3696 Idler gear, steel (30-tooth)
3745 Turnbuckles, toe link, 59mm (78mm center to center) (2) (assembled w
3757 Springs, rear (black) (2)
4686 Spur gear, 86-tooth (48-pitch) (for models with Torque-Control slipper c
4690 Spur gear, 90-tooth (48-pitch) (for models with Torque-Control slipper c
4725 Gear, pinion (25-tooth) (48-pitch) / set screw
4728 Gear, pinion (28-tooth) (48-pitch)/ set screw
4957 Springs, red (for Ultra Shocks only) (2.5 rate) (f/r) (2)
5347 Rod ends, Revo (large) with hollow balls (12)
5525 Rod ends (12)/ hollow balls (12) (fits Jato, includes 4 hollow balls for inn
5552 Rebuild kit, slipper clutch (steel disc/ friction pads (3)/ spring/ pin/ 4.0m
5556 Slipper pressure plate & hub (aluminum alloy)
5835 Bumper, front/ bumper mount, front (black)
5837 Skidplates, front & rear (black)
For Revo
5314 Body mounts, front & rear/ body mount posts, front & rear/ 2.5×18mm
For Slayer
5382X Gear set, differential (output gears (2)/ spider gears (2)/ spider gear s
5914 Differential kit, center (complete for Slayer) (assembled)
5918X Push rod (aluminum) (assembled with rod ends) (2) (use with progres
5938R Toe links, Slayer (Tubes™ 7075-T6 aluminum, red) (83mm, fits front
5998 Sway bar kit, Slayer (front and rear) (includes front and rear sway bar
For Driveshafts
5458X Yokes, differential and transmission (2)/ 4×15mm screw pins (2)
“Traxxas” R/C Model Parts SLASH 5805
2556 Suspension arms, (rear) (2)
Accessory
5170 Starter, recoil (complete with screws)
Great news to the Tamiya fans!! rcMart is filling up their stock up with huge amount of Tamiya Parts including the latest and the most popular parts for different RC model. Various choices from wheel, tires, suspension, damper, chassis, drive belt, drive shaft, pinion gear etc… for the most popular car kit such as M-03, TT-01, DB-01, DF-03, TB-03 and TRF Series. If you are looking for the best Parts for your Tamiya model, please have a look at the following list:
Item No. Description
49469 Tamiya (#49469) M-Chassis 11-Spoke Wheel (FY)
49493 Tamiya (#49493) TRF416 Front Direct Coupling
50354 Tamiya (#50354) 16T, 17T AV Pinion Gear Set
50355 Tamiya (#50355) 18T, 19T AV Pinion Gear Set
50356 Tamiya (#50356) 20T, 21T AV Pinion Gear Set
50357 Tamiya (#50357) 22T, 23T AV Pinion Gear Set
50452 Tamiya (#50452) Stadium Blitzer Rear Wheels (1 PR)
50454 Tamiya (#50454) Racing Slick Tire Set
50476 Tamiya (#50476) Rally Block Tires (1 Pair)
50477 Tamiya (#50477) 24T, 25T AV Pinion Gear Set
50547 Tamiya (#50547) W.R.Slick Tires W/Inner Sponge
50548 Tamiya (#50548) 2-Piece Mesh Wheels 4WD/FWD Touring & Rally Car
50554 Tamiya (#50554) 4WD/FWD Touring & Rally Car Gear
50568 Tamiya (#50568) M-Chassis Radial Tires
50569 Tamiya (#50569) Mini Cooper Wheels (1 pair)
50602 Tamiya (#50602) Differential Bevel Gear Set
50672 Tamiya (#50672) 5-Spoke 2-Piece Wheels
50673 Tamiya (#50673) 5-Spoke 2-Piece Wheels Wide
50676 Tamiya (#50676) Rover Mini-Cooper ‘94 Monte-Carlo Plated Wheel
50678 Tamiya (#50678) Toyota Tom’s Exiv JTCC Wheels
50683 Tamiya (#50683) M-Chassis 60D Radial Tires (1 Pair)
50684 Tamiya (#50684) M-Chassis 60D M-Grip Radial Tires (1 PR)
50686 Tamiya (#50686) M-Chassis 60D Inner Sponge Set
50737 Tamiya (#50737) TL-01 C Parts (Suspension Arm)
50741 Tamiya (#50741) Porsche 911 GT1 Front Wheels
50742 Tamiya (#50742) Porsche 911 GT1 Rear Wheels
50792 Tamiya (#50792) M03 Chassis A-Part (Chassis)
50855 Tamiya (#50855) TL01 Body Mount
50963 Tamiya (#50963) Tl-01 LA Front Hub Carrier
50966 Tamiya (#50966) TL-01 LA M Parts (Suspension Arm)
50972 Tamiya (#50972) Mini Cooper Wheels (4)
51001 Tamiya (#51001) Bathtub Chassis For TT01
51003 Tamiya (#51003) B Parts (Suspension Arm) For TT01
51004 Tamiya (#51004) G Part (Gear) For TT01
51005 Tamiya (#51005) P Parts (Servo Horn) For TT01
51006 Tamiya (#51006) Drive Shaft Set (TT01)
51007 Tamiya (#51007) Urethane Bumper M for TT01 TGS
51008 Tamiya (#51008) Bevel Gear Set For TT01, TGS
51019 Tamiya (#51019) Ureythane Bumper (TT01, TGS)
51103 Tamiya (#51103) C Parts For TB Evo.IV/TRF415MS
51104 Tamiya (#51104) D Parts For TB Evo.IV/TRF415MS
51107 Tamiya (#51107) Hub Carrier (4Deg) For TB Evo. IV/TRF 415MS
51210 Tamiya (#51210) TA05 Drive Belt
51212 Tamiya (#51212) TA05 Ball Diff Pulley (36T)
51215 Tamiya (#51215) TA05 Spur Gear (70T)
51219 Tamiya (#51219) Drift Tires Type-D & Wheels (2pcs)
51226 Tamiya (#51226) Urethane Bumper L For TT01 & TGS
51237 Tamiya (#51237) Suzuki Swift Super 1600 Wheels
51247 Tamiya (#51247) DF03 Bevel Gear Set
51249 Tamiya (#51249) DF03 B Parts (Damper Stay)
51250 Tamiya (#51250) DF03 C Parts (Front Upright)
51251 Tamiya (#51251) DF03 D Parts - H. Carr/Rear Upright
51252 Tamiya (#51252) DF03 E Parts Suspension Arm
51293 Tamiya (#51293) TA05-IFS F Parts (H. Carrier) *2
51296 Tamiya (#51296) TA05-IFS C Parts (F. Upright)
51297 Tamiya (#51297) TA05-IFS D Parts (Sus. Arm) *2
51305 Tamiya (#51305) TRF501X DB01 Rear Wheels (2Pcs)
51307 Tamiya (#51307) DB01 B Parts (Bumper)
51308 Tamiya (#51308) DB01 Front Upright
51309 Tamiya (#51309) DB01 D Parts (Caster Block)
51310 Tamiya (#51310) DB01 Rear Upright
51311 Tamiya (#51311) DB01 Front Suspension Arm
51312 Tamiya (#51312) DB01 M Parts (Damper Stay)
51313 Tamiya (#51313) DB01 Rear Suspension Arm
51314 Tamiya (#51314) 48 Pitch Spur Gear (91T)
51315 Tamiya (#51315) DB01 Differential Joint
51316 Tamiya (#51316) DB01 Front Drive Shaft
51317 Tamiya (#51317) DB01 Rear Drive Shaft
51318 Tamiya (#51318) TT-01 Type-E (A Parts)
51319 Tamiya (#51319) TT-01 Type-E (D Parts)
51320 Tamiya (#51320) DB01 Dish Wheels (Front/White)
51321 Tamiya (#51321) DB01 Dish Wheels (Rear/White)
51341 Tamiya (#51341) TRF416 Differential Screw Nut
51366 Tamiya (#51366) DF-03Ra B Parts (Damper Stay)
51367 Tamiya (#51367) DF-03Ra E Parts (Suspension Arm)
51368 Tamiya (#51368) DF-03Ra N Parts (Body Mount)
51369 Tamiya (#51369) DF-03Ra Spur Gear Set
53059 Tamiya (#53059) Wide Stud Spike Tires (1 Pair)
53101 Tamiya (#53101) 0.4 Steel Pinion Gear (20/21T)
53102 Tamiya (#53102) 0.4 Steel Pinion Gear (22/23T)
53103 Tamiya (#53103) 0.4 Steel Pinion Gear (24/25T)
53113 Tamiya (#53113) Racing Inner Sponge
53117 Tamiya (#53117) 0.4 Steel Pinion Gears (26T/27T)
53124 Tamiya (#53124) 3mm Tungsten-Carbide Diff Ball Set
53127 Tamiya (#53127) Skyline Speed-Tuned Gear Set TA02 Chassis
53141 Tamiya (#53141) 4WD Touring & Rally Car Lightweight King Pins
53156 Tamiya (#53156) Hard Inner Tire Sponge Tire (4WD/FWD)
53164 Tamiya (#53164) 4WD Touring & Rally Car Hollow Carbon Gear Shaft Set
53195 Tamiya (#53195) 4WD-TA02 & FWD Car Carbon Chassis Plates
53204 Tamiya (#53204) M-Chassis Inner Sponge
53214 Tamiya (#53214) Super Grip Radial Tire
53215 Tamiya (#53215) M-Chassis Slicks
53218 Tamiya (#53218) Hard Joint Cup for Gear Diff
53220 Tamiya (#53220) Touring Car Super Slicks - 4WD/FWD
53222 Tamiya (#53222) M-Chassis Super Slicks
53224 Tamiya (#53224) 4WD/FWD M2 Slicks
53227 Tamiya (#53227) 4WD/FWD M2 Radial Tires
53228 Tamiya (#53228) 4WD Super Slicks Wide
53230 Tamiya (#53230) Wide Inner Tire Sponge Set (Hard)
53231 Tamiya (#53231) Wide Super Grip Radial Tire
53255 Tamiya (#53255) M-Chassis 60D inner sponge hard
53262 Tamiya (#53262) 0.4 Steel Pinion Gears (28T/29T)
53267 Tamiya (#53267) TA03 Ball Differential
53293 Tamiya (#53293) Reinforced Slicks Type-A
53294 Tamiya (#53294) Reinforced Slicks Type-B
53295 Tamiya (#53295) New Tire Inner (For Touring Car)
53300 Tamiya (#53300) Turnbuckle Tie-Rod Set For TL-01
53303 Tamiya (#53303) Adjustable Upper Arm Set For TL-01
53335 Tamiya (#53335) Reinforced One-piece Spoke Wheels -1pr
53336 Tamiya (#53336) Reinforced One-piece Mesh Wheels -1pr
53343 Tamiya (#53343) Front & Rear Stabilizer Set For M03
53344 Tamiya (#53344) Alum Heat Sink For M-03 Chassis
53345 Tamiya (#53345) Toe-in Rear Upright For TL-01/M03
53346 Tamiya (#53346) Quick Release Battery Holder For TL01/M03/M04/FF02
53390 Tamiya (#53390) Hollow Carbon Gear Shaft For M03 & M04
53406 Tamiya (#53406) 0.4 PInion Gear (36T, 37T)
53407 Tamiya (#53407) 0.4 Pinion Gear (38T, 39T)
53420 Tamiya (#53420) 0.4 Pinion Gear (40T, 41T)
53421 Tamiya (#53421) 0.4 Pinion Gear (42T, 43T)
53422 Tamiya (#53422) 0.4 Pinion Gear (44T, 45T)
53423 Tamiya (#53423) 0.4 Pinion Gear (46T, 47T)
53425 Tamiya (#53425) 0.4 Pinion Gear (50T, 51T)
53433 Tamiya (#53433) Medium-Narrow Reinforced Tires Type A
53434 Tamiya (#53434) Medium-Narrow Soft Inner Foam
53435 Tamiya (#53435) Medium-Narrow Hard Inner Foam
53467 Tamiya (#53467) Long-Span Suspension Arm Set For TL-01 & FF02
53468 Tamiya (#53468) Medium-Narrow White Mesh Wheel (+2)
53509 Tamiya (#53509) Hard Flourine Coated 0.6 Alu. Pinion (20T/F201)
53517 Tamiya (#53517) TL-01LA Stabilizer Set
53523 Tamiya (#53523) Aluminium Front Upright Set For M03, M04
53581 Tamiya (#53581) Racing Motor Brush Set (Standard Type)
53582 Tamiya (#53582) Medium-Narrow Medium Inner Foam
53597 Tamiya (#53597) Assembly Universal Shaft Set For M03
53620 Tamiya (#53620) Aluminium Propeller Shaft For TT01
53663 Tamiya (#53663) Ball Differential Set For TT01
53664 Tamiya (#53664) TT01 Aluminium Motor Heat Sink
53665 Tamiya (#53665) Spur Gear Set (55T/58T) For TT01
53666 Tamiya (#53666) Metal Motor Mount For TT01/DF02
53671 Tamiya (#53671) Front One-Way Unit For TT01
53673 Tamiya (#53673) Toe-in Rear Upright For TT01 & TGS
53674 Tamiya (#53674) Adjustable Upper Arm Set For TT01 & TGS
53682 Tamiya (#53682) Alum. Bumper Stopper For TT01, TGS
53683 Tamiya (#53683) Urethane Bumper M
53690 Tamiya (#53690) 0.4 Pinion Gear (30T, 31T)
53691 Tamiya (#53691) 0.4 Pinion Gear (32T, 33T)
53705 Tamiya (#53705) Reinforced Tires 24mm Type B3
53790 Tamiya (#53790) Cup Joint for Universal Shaft For TT01/DF02
53792 Tamiya (#53792) Assembly Universal Shaft (TT01, TA04)
53800 Tamiya (#53800) (TT01, TGS) Aluminium Toe-in Rear
53806 Tamiya (#53806) TT01 Ball Diff Cup Joint For Universal Shaft
53864 Tamiya (#53864) TT01 Aluminium Steering
53897 Tamiya (#53897) TA05 Aramid Drive Belt (BU)
53914 Tamiya (#53914) White Dish Wheel
53923 Tamiya (#53923) 05 Module Pinion Gear (27T,29T)
53924 Tamiya (#53924) DF-03 Heat Sink Bar Set
53925 Tamiya (#53925) DF-03 Slipper Clutch Set
53931 Tamiya (#53931) DF-03 Center One-Way Set
53944 Tamiya (#53944) 3×50mm Hard Turnbuckle Shaft Set
53948 Tamiya (#53948) Alum One-Piece Propeller Cup Joint For DF03
53949 Tamiya (#53949) Lightweight Battery Stopper Pin For DF03
53954 Tamiya (#53954) DF-03 Front One-Way Link Gear
53955 Tamiya (#53955) 5-Spoke Mesh W/24mm Slick Tires/0-Offset
53959 Tamiya (#53959) Metal-Plated Mesh Wheel W/Drift Tire
53960 Tamiya (#53960) 6-Spoke Wheel W/Drift Tire
53984 Tamiya (#53984) Buggy Racing Wing (DF03)
54015 Tamiya (#54015) DB01 Assy Univ.Shaft
54016 Tamiya (#54016) DB01 Assy Univ.Shaft R
54017 Tamiya (#54017) DB01 Front One-Way Set
54018 Tamiya (#54018) DB01 Slipper Clutch Set
54020 Tamiya (#54020) Super Driftech Tires 24mm
54021 Tamiya (#54021) Mesh Wheel w/SD Tire
54022 Tamiya (#54022) 10-S Wheel w/SD Tire
54023 Tamiya (#54023) DB01 Front One-Way Pulley (37T)
54026 Tamiya (#54026) TT-01 Alu.Prop.Joint Shaft
54027 Tamiya (#54027) DB01 Slipper Pad
54033 Tamiya (#54033) DB01 Carbon Reinforced A Parts
54034 Tamiya (#54034) DB01 Carbon Reinforced D Parts
54035 Tamiya (#54035) DB01 Carbon Reinforced L Parts
54036 Tamiya (#54036) DB01 Carbon Reinforced M Parts
54037 Tamiya (#54037) DB01 Aluminum Sus.Mount (Front)
54038 Tamiya (#54038) DB01 Aluminum Sus.Mount (Rear)
54040 Tamiya (#54040) DB01 Motor Heat Sink
54062 Tamiya (#54062) 48 Pitch Pinion Gear
54063 Tamiya (#54063) TRF501X Aluminum Caster Block
54076 Tamiya (#54076) TB-03 Wheel Axles
54139 Tamiya (#54139) Touring Car body Accessory Set
54140 Tamiya (#54140) DB01 Reinforced Drive Belt
54148 Tamiya (#54148) DB01 Aluminum Steering Post (Blue)
54149 Tamiya (#54149) DB01 Aluminum Racing Steering (Blue)
54151 Tamiya (#54151) TB-03 HP Bearing Holder
54170 Tamiya (#54170) TA05v.2 Low Friction Belt 342mm
84032 Tamiya (#84032) F103RM w/L Body
84051 Tamiya (#84051) Ball Differential Pulley 37T Bulk
84081 Tamiya (#84081) M-Chassis HT Saver Aluminum Horn Black
84082 Tamiya (#84082) Aluminum Horn for HT Saver Black
84083 Tamiya (#84083) 4mm Aluminum Flange Nut Black*5
84084 Tamiya (#84084) 4mm Aluminum Flange Nut Pink*5
84085 Tamiya (#84085) 4mm Aluminum Flange Nut Purple*5
84086 Tamiya (#84086) TRF416 Damper Stay (F. Mid)
84087 Tamiya (#84086) TRF416 Damper Stay (R. Mid)
40504 Tamiya (#40504) Alu. Pinion Gear (16T)
40505 Tamiya (#40505) Alu. Pinion Gear (18T)
45037 Tamiya (#45037) ESC TEU-103BK For Twin Motor (Forward/Reverse)
49382 Tamiya (#49382) On-Road Hard Spring Set (White)
49421 Tamiya (#49421) Medium-Narrow Dish Wheel/0 Offset (FYW)
49495 Tamiya (#49495) TRF416 Lower Deck
50171 Tamiya (#50171) Heat Resist Double Side Tape
50473 Tamiya (#50473) Servo Saver high torque type
50505 Tamiya (#50505) F1 T-Bar For F103 Chassis
50520 Tamiya (#50520) C.V.A. Short Shock Unit Set II
50738 Tamiya (#50738) G Parts (Gear) For TL-01
50880 Tamiya (#50880) TA04 Ball Differential Plate set
50976 Tamiya (#50976) Enzo Ferrari Wheels (Offset + 4)
50994 Tamiya (#50994) 5mm SUS. Ball (8Pcs)
51002 Tamiya (#51002) A Parts (Upright) For TT01
51022 Tamiya (#51022) Medium-Narrow 10-Spoke Wheels
51067 Tamiya (#51067) TRF415/TA05 Suspension Mount (C)
51350 Tamiya (#51350) F103 Mesh Wheel Set (GD)
53042 Tamiya (#53042) Ball Diff Grease
53273 Tamiya (#53273) Formula Car Rear Suspension Ball Mount Set
53424 Tamiya (#53424) 0.4 Pinion Gear (48T, 49T)
53453 Tamiya (#53453) Medium - Narrow 6 Spoke Wheels (Offset +2)
53500 Tamiya (#53500) C.Joint For Assy Univ Shaft
53539 Tamiya (#53539) Ø5.5mm Alu. Spacer Set
53577 Tamiya (#53577) TRF Damper Urethane Bushing (10 pcs)
53851 Tamiya (#53851) 46mm Titanium Coated Suspension Shafts
53859 Tamiya (#53859) 5-Spoke Plated Wheel 24mm (0Deg) Offset
53890 Tamiya (#53890) Swing Shaft Protector For TRF415
53896 Tamiya (#53896) TRF415 Sus. Mount 1E
53900 Tamiya (#53900) F103GT 04 Module Spur Gear
53906 Tamiya (#53906) 5×5mm Alu. Hex Ball Connector
54008 Tamiya (#54008) Led Light 3mm (WT)
54011 Tamiya (#54011) Led Light 5mm (YW)
54056 Tamiya (#54056) TB-03 Aluminum Differential Joint Set
54064 Tamiya (#54064) TB-03 Suspension Mount (1XD)
54065 Tamiya (#54065) TB-03 Suspension Mount (1XC)
54067 Tamiya (#54067) TB-03 Suspension Mount (1XA)
54069 Tamiya (#54069) TB-03 Suspension Mount (1A)
54071 Tamiya (#54071) TB-03 Aluminum Suspension Mount (1C)
54073 Tamiya (#54073) TB-03 Aluminum Suspension Mount (1E)
54089 Tamiya (#54089) TB-03 Carbon Bumper Support
54090 Tamiya (#54090) TB-03 Servo Stay R
54091 Tamiya (#54091) TB-03 Servo Stay L
54095 Tamiya (#54095) TB-03 Racing Steering Set
54098 Tamiya (#54098) TB-03 Carbon Reinforced A Parts (Gear Case)
54106 Tamiya (#54106) CR-01 Bent Lower Arm (Front)
54107 Tamiya (#54107) CR-01 Bent Lower Arm (Rear)
54113 Tamiya (#54113) CR-01 Steel Prop Shaft 95mm
54120 Tamiya (#54120) M Chassis HT Servo Saver
54141 Tamiya (#54141) DB01 High Traction Lower Arm (Front)
54142 Tamiya (#54142) DB01 High Traction Lower Arm (Rear)
56511 Tamiya (#56511) Track Truck Multi-Function Control Unit
84008 Tamiya (#84008) TRF Sp Damper H Coating (BK)
F104 PRO is definitely going to be the hottest RC product from Tamiya in 2009. After the long term success of the F103 Series, the F104 PRO will be the improvement base on the F103. Suppose the Formula RC fans are looking forward to this amazing chassis. The F104 PRO Chassis Kit will be out on 20th June but now you can do the preparation for your dreamed F104 PRO because the optional parts already arrived rcMart.com. Such as Carbon Deck, T-bar and motor mount. Please check the following list if you want to be the first to built a high spec. F104 PRO:
The Brand New Tamiya 1/10 RC (#58432) Lexus GS400/Aristo (TT-01D Type-E) has just arrive rcMart.com
The top class sports sedan Toyota Aristo, otherwise known as the Toyota Lexus GS has attracted attention all around the world with its combination of stylish European looks and superb Japanese technology since it was first released in 1991. This R/C model comes on the new TT-01Type E Drift chassis which and is equipped with Tamiya LED light unit TLU- 01, headlights, and taillights which realistically replicates the Aristo’s lighting dynamics.
About the Model
# Length: 460mm, Width: 187mm, Height: 140mm.
# Based on the lightweight and user-friendly TT-01E chassis for effortless assembly.
# 4WD shaft driven bathtub chassis with coil spring damped, 4-wheel independent double wishbone suspension and sealed front and rear differential gearbox.
# Drift-spec modifications include special suspension tuning, full ball bearings, RS-540 sport tuned motor, aluminum heat sink, CVA super mini shock dampers and short springs and adjustable upper arms.
# Polycarbonate body and newly designed font and rear light cases capture the Aristo’s beautiful form.
# Installed on the stylish wheels are Super Driftech tires which are specially designed for long-lasting drift action. (24mm, offset +2)
# Includes Electronic Speed Controller (TEU-101 BK).
# Includes LED Light Unit (TLU-01) and 2 x white LED’s (Front) and 2 x red LED’s (Rear).
# Add separately available LED lights for a greater sense of realism.
# Add Tamiya LED Light Control Unit (TLU-02) Item 53937 for more control of light operations.
# Wide variety of tune-up parts are separately available to further customize your machine.
# 2-channel R/C system, battery pack and charger separately required.
The Hobbywing EZrun Series Brushless ESC System is one of the most popular Brushless System in the RC market. If you are still looking for those Brushless ESC Systems (Combo 15-car, Combo 16-car, Combo 17-car & Combo 18-car) please do not worry because it has been updated to a new version - version 2.0 and these brushless system has been given a new item no. as combo-A1, combo-A2, combo-B4 & combo-B5. The old version are exactly the same as the version 2.0, and of course there are more new features on the version 2.0 such as new crawler running mode and USB Supported on the ESC. New programmable functions on the program card. The specification of the version 2.0 brushless system is as well as the version 1.0. No negative but only positive changes on the Ezrun series brushless system by Hobbywing.
Various choice of Colt Body Shell for 1:10 Mini Chassis will be restocked at rcMart.com soon with 2 new body shells, M2316 ( Ford pick-up) and M2318 (Chvey pick-up). Please check rcMart.com for the whole range of the Colt Body Shell arrival news.
A new Li-Po receiver battery series has just released by Yeah Racing and available in 2 different sizes (LP-0037 & LP-0038). Compare to Ni-MH battery, Li-Po battery contains more capacity but lighter in weight. Which means the playing time can be extended much longer also the RC car can go even faster by using these Li-Po batteries. Thus, Li-Po batteries has been widely use by most of the RC player nowadays. The Yeah Racing LP-0037 and LP-0038 receivers battery includes a balance plug for balance charging to avoid any uneven voltage distribution inside the Li-Po battery so the battery always keeping its top quality.
Yeah Racing LiPo Battery Pack 7.4V 1800mAh for Receiver Use (LP-0037)
Specifications:
- Discharge rate: 3C
- Capacity: 1800mAh
- Voltage: 7.4v
- Length: Approx. 50mm
- Width: Approx. 30.5mm
- Height: Approx. 28mm
- Net Weight: 76g
Yeah Racing LiPo Battery Pack 7.4V 2000mAh for Receiver Use (LP-0038)
Specifications:
- Discharge rate: 3C
- Capacity: 2000mAh
- Voltage: 7.4v
- Length: Approx. 83mm
- Width: Approx. 30.5mm
- Height: Approx. 16.7mm
- Net Weight: 86g
Due to the voltage of Li-Po battery is higher than the Ni-MH battery, a Li-Po voltage regulator must use together with the Li-Po battery by coverting the to a consistently safe voltage. It can prevent overheating and any damaged on receiver and servos.
*Photo for reference only. The tires, wheels, motor, chassis and foam bumper are NOT INCLUDED
*Click the image to buy
Excellent news to all of the TT-01 or TT-01E owners. Yeah Racing aluminum conversion kit for TT-01 / TT-01E has just arrived rcMart.com. The strength of TT-01 / TT-01E chassis would be highly improved, and of course the car will look “BLING BLING” with this aluminum shiny kit on. There is 2 option colors of red or blue for this conversion kit. Instruction manual and Yeah Racing Brand New 2009 car body sticker also comes with this conversion kit.
Yeah Racing (#TT-002) Alloy Rear Lower Arm Set X 1 set
Yeah Racing (#TT-006) Alloy Front Knuckle Arm set X 1 set
Yeah Racing (#TT-007) Alloy Rear Knuckle Arm set X 1 set
Yeah Racing (#TT-014V2) Alloy Main Drive Shaft X 1 pc
Yeah Racing (#TT-015) Alloy Dog Bone X 2 pairs
Yeah Racing (#TT-019) Aluminum Rear Box Stiffener X 1 pc
Yeah Racing (#TT-021) Alloy Battery Post X 1 set
Yeah Racing (#TT-022) Alloy Drive Shaft X 2 pairs
Yeah Racing (#TT-022V2) Aluminum Front/Rear Propeller Joint Set X 1 pair
Yeah Racing (#TT-040) Aluminum Bumper Plate X 1 pc
Yeah Racing (#TT01E-042) Alloy Bearing Steering Set X 1 set
Yeah Racing (#TT-100) Aluminum Upper Suspension Mount X 1 pc
Yeah Racing (#TT01E-100) Aluminum Upper Suspension Mount X 1 pair
Yeah Racing (#TT-124) Alloy Rear Upper Arm Set X 1 set
Yeah Racing (#TT-125) Alloy Front Upper Arm Set X 1 set
Yeah Racing (#TT-126) Alloy Front Lower Arm Set X 1 set
Yeah Racing (#TT-133) Aluminum Front Gear Box Joint Set X 2 sets
Yeah Racing (#BN-0009BK) 4.8mm Ball End X 4 pcs
Yeah Racing (#TB-0013) 3 x 15 Stainless Steel Turnbuckle X 2pcs
Yeah Racing (#XPA-FB001) 4.8mm Pillow Ball X 4pcs
Yeah Racing (#DP-0001) Alloy 50mm Damper Set X 1 set
Yeah Racing (#WA-004) Alloy Wheel Washer X 1 set
Bearing Set (#YB0194M):
- Yeah Racing 5 x 11 x 4mm Bearing X 12 pcs
- Yeah Racing 8 x 12 x 3.5mm Bearing X 4 pcs
- Yeah Racing 5 x 8 x 2.5mm Bearing X 2 pcs
Hex Wrench x 1 pc
The Tamiya (#58431) F104 PRO w/Body 1/10 High Performance Racing Car Chassis Kit has arrived rcMart.com and available for sale now.
With the release of the limited edition 1/10 R/C F103 15th Anniversary Chassis Kit (Item 84056) and F103RM Chassis cars, popularity in this type of R/C model has swelled all around the world. Tamiya is proud to release the newly designed F104 chassis. Events such as Tamiya Grand Prix now feature F103 & F104 class races.
# The first edition of the F104 chassis kit comes in PRO specifications and uses top-quality carbon fiber parts for a beautiful finish.
# The car features front & rear wings and an original body, which produce a great scale realism.
# Tire size and body dimensions mimic those seen in races.-The battery is longitudinally-mounted for a slim body design.
# The 2WD Direct Drive system has excellent acceleration qualities and is very reliable.
# The front suspension features a link-type coil spring with the rear suspension having a friction plate & a T-bar set up with a TRF damper.
# A part of the new design is the aluminum diff housing. Even if your wheels are removed,the differential will hold together allowing easy maintenance.
# The height adjustable rear gear case has been designed to match the new tire dimensions.
# The isometric steering rod links up well with the longitudinally-mounted steering servo for excellent control.
# The car features a low number of parts allowing for simple operation and easy maintenance.-Type 540 motor included.
# ESC, 2-channel R/C system, battery pack & charger are separately required.
Used to win the ISTC electric touring car World Championships 2 weeks ago, Tamiya have released full details on the TRF416 Worlds Edition. Not a big change from the previous version of the chassis, this new kit is all about refinement. The WE features a new longer top deck that goes around the spur gear assembly all the way to the rear axle, new more efficient drive belts, and coated shock shafts & bodies for smoother damping action. Also to cope with the power from modern brushless systems the motor mount has been stiffened up, while as a standard kit setting the car is supplied with a front spool as well as front 1C/1C and rear 1XA/1F lower suspension brackets.
What a great news to the 1:10 RC EP drivers becuase the Yeah Racing Ultimate Brainpower Brushless ESC (35A & 60A) & Motor (9T, 10T & 13T) Series has been upgraded to version 2.0 and fully restocked now. There are more new features on the version 2.0 such as new crawler running mode and USB Supported on the ESC. New programmable functions on the program card.The specifications of the version 2.0 brushless system is as excellent as the version 1.0. It is positively a further improvement by Yeah Racing on the Ultimate Brainpower Brushless ESC Series.
From now on, special offer on the Yeah Racing Ultimate Brainpower ESC & Motor Set. By puchasing each of the selected Brushless ESC and Motor Set, you will receive a FREE Yeah Racing (#YA-0180) Tornado High Speed Cooling Fan for Heat Sink - Worth USD $11.90.
Restocked Ultimate Brainpower Brushless ESC / Motor Series (Version 2.0):
BM-0004V2 - Ultimate Brainpower ESC 35A (Version 2) & 10T Sensorless Brushless Motor Set + Free Tornado Cooling Fan
BM-0012V2 - Ultimate Brainpower ESC 35A (Version 2) & 9T Sensorless Brushless Motor Set + Free Tornado Cooling Fan
BM-0015V2 - Ultimate Brainpower ESC 35A (Version 2) & 13T Sensorless Brushless Motor Set + Free Tornado Cooling Fan
BM-0005V2 - Ultimate Brainpower ESC 35A with fan (Version 2)
BM-0014V2 - Ultimate Brainpower ESC 60A with fan (Version 2)
