RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: 雜牌油車parts求救 [打印本頁]

作者: kazewong    時間: 2009-9-12 15:23
標題: 雜牌油車parts求救
請問下圖的parts 在哪有得賣?
謝謝!
作者: cash    時間: 2009-9-12 17:14
What Car???
作者: kazewong    時間: 2009-9-12 17:36
I don't know what this car is either...
I bought it from a RC-evo member.....
作者: benz-clk    時間: 2009-9-13 00:23
Forget it !!
作者: redbullbull    時間: 2009-9-13 00:26
拿去鴻聲修理吧.........
作者: superx    時間: 2009-9-13 03:40
DIY fix...鋼膠

                               
登錄/註冊後可看大圖


                               
登錄/註冊後可看大圖


適合金屬的填補作用。
價格:$24.00/枝
作者: swswsw    時間: 2009-9-13 08:06
yes DIY repair la....
remember to sand the surface before applying that...
also cut some wires and embed into the glue.. to reinforce it..
Add some oil on the pin.. and insert it before the glue clue...
Good Luck...
作者: swswsw    時間: 2009-9-13 08:13
拿去鴻聲修理吧.........
redbullbull 發表於 2009-9-13 00:26


haha... they change business style?
作者: kazewong    時間: 2009-9-13 12:41
鴻聲幾多錢整?
作者: superx    時間: 2009-9-13 15:16
整 is not a problem, but worry you have to parts can find to replace
作者: coronafans    時間: 2009-9-13 21:41
大陆HSP无限parts, 去淘宝网找
作者: ilove-benz    時間: 2009-9-13 22:30
拿去鴻聲修理吧.........
redbullbull 發表於 2009-9-13 00:26



唔好玩佢啦

紅星兩位咁惡...邊有彩你啦
作者: swswsw    時間: 2009-9-14 06:32
惡惡惡 ... haha... unless u put $$10k on the table.....
作者: KYOSH0    時間: 2009-9-15 15:37
this 雜牌油車 always no parts
作者: fn14529    時間: 2009-11-1 19:29
去深水精藝條粉腸一定有,不過要帶定多貨!!!!!!!!!!!!!!!!!!!!!!!!!!
作者: redbullbull    時間: 2009-11-1 22:06
去深水精藝條粉腸一定有,不過要帶定多貨!!!!!!!!!!!!!!!!!!!!!!!!!!
fn14529 發表於 2009-11-1 19:29

咩貨先??
作者: CK4237    時間: 2009-11-2 01:50
$$$$$$$$$$$$$$$$$$$$$$$$$$$$
作者: redbullbull    時間: 2009-11-2 02:07
$$$$$$$$$$$$$$$$$$$$$$$$$$$$
CK4237 發表於 2009-11-2 01:50

有限錢咋喎
果到咪最多幾十蚊
作者: fn14529    時間: 2009-11-2 09:59
昵架料貴京商
作者: KYOSH0    時間: 2009-11-4 08:30
精藝條粉腸 = pk
帶定多D$............
buy a new one is better




歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://rc-evo.com/xbbs/) Powered by Discuz! X3.2