RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: Kyosho Lazer ZX [打印本頁]

作者: combatfung 時間: 2006-6-27 19:47
標題: Kyosho Lazer ZX
anyone know there had any cover for the Optima mid out there for sale ??

[ 本帖最後由 combatfung 於 2007-1-5 02:41 編輯 ]

作者: minimini 時間: 2006-6-28 01:00
discontinued for many years already........

作者: combatfung 時間: 2006-6-28 16:53
i am sure my one is Optima mid or Lazer ZX.................any one could tell me, i am going to post the photo tonight!!

[ 本帖最後由 combatfung 於 2006-6-28 22:55 編輯 ]

作者: combatfung 時間: 2006-6-29 22:39
is that the Lazer zx5 cover fit the old one ???anyone can help !!!

作者: minimini 時間: 2006-6-29 22:40

原帖由 combatfung 於 2006-6-29 22:39 發表
is that the Lazer zx5 cover fit the old one ???anyone can help !!!

definitely not.......also the ZX5 shell don't have the undertray.......

作者: aloha 時間: 2006-6-29 22:46
mid 係一條過皮帶, 同皮帶 (下半部) 係貼住底板咁既
lazer zx 係雙皮帶 ,
combatfung 兄果架好似係 mid

作者: combatfung 時間: 2006-6-30 02:56
i think is lazer lei ka............THX, i still looking for the shell, if i could not found it , i am going to buy china buggy shell and wing to instead of the original one !

作者: ray9394 時間: 2006-6-30 12:26
I think this is a Optima Mid (LWB) with Lazer suspension.

作者: Evo5 時間: 2006-6-30 12:37
Wrong Wrong Wrong
Mid is use metal chassis
Lazer Zx is use fiber, so this is a Lazer ZX

[ 本帖最後由 Evo5 於 2006-6-30 12:39 編輯 ]

作者: ray9394 時間: 2006-6-30 17:47
Kyosho produced a C-FRP kit to convert the optima mid (SWB) to LWB and this is a quite common option. Besides, the Mid racer will also put the Lazer ZX body and suspension to make a Mid-"Lazer ZX" look.

作者: ray9394 時間: 2006-6-30 17:56
Or you may check the suspension hinge pin mount, Optima Mid use e-cips to lock the pin and the mount is just a piece of metal, while Lazer use one piece plastic mount and locked it by screw.

作者: combatfung 時間: 2006-6-30 19:24
let me post more photo...............

作者: arsenal 時間: 2006-6-30 21:42

原帖由 combatfung 於 2006-6-27 19:47 發表
anyone know there had any cover for the Optima mid out there for sale ??

試下去新高登個阿叔度尋下寶

作者: arsenal 時間: 2006-6-30 21:44
Optima Mid,埃!~

我以前都有部,後尾冇玩RC當垃圾掉佐,side哂

作者: combatfung 時間: 2006-7-1 18:35

原帖由 arsenal 於 2006-6-30 21:42 發表

試下去新高登個阿叔度尋下寶

is that MR WONG ???, and where is the new add, before at the golden computer center Yen Chow street entrance beside the watch shop!!!

作者: combatfung 時間: 2006-7-1 18:59
let check with the photo, all the stuff is re-install into the chasis last night!

[ 本帖最後由 combatfung 於 2006-7-1 19:01 編輯 ]

作者: police 時間: 2006-7-1 20:04
Very good!!

作者: ray9394 時間: 2006-7-1 22:56
I'm wrong. This is a Lazer.

作者: minimini 時間: 2006-7-1 23:56
wa.....very original........good....

this is my lazer.....

作者: combatfung 時間: 2006-7-3 19:41
today i go to the new golden computer center and looking for the shell to my lazer, he had it but is really old and bad in condition, so i didn't but it , and i ask for the spider MKII, it cost for 550 HKD, is that good??

作者: chrisyuym 時間: 2006-7-8 07:42
標題: It is a lazer
it is a lazer,100% sure because it has got a middle one way in the pic, do you guys see it? it is sitting on left side of the spur gear,

作者: combatfung 時間: 2006-7-15 08:32
So , anyone had the shell for my lazer for sell, or any place can found it, golden computer canter had the shell but really damage that u won't buy, help!!!

作者: combatfung 時間: 2006-9-2 00:44
finally , i bought the Lzxer ZX-5 shell at KWS today , after some cutting work ...........is fit the old lazer , i think is not bad wow ,,,,, if someone want the shell for old lazer, this is one of the chioce !

:lol

作者: minimini 時間: 2006-9-2 00:47

原帖由 combatfung 於 2006-9-2 00:44 發表
finally , i bought the Lzxer ZX-5 shell at KWS today , after some cutting work ...........is fit the old lazer , i think is not bad wow ,,,,, if someone want the shell for old lazer, this is one of ...

wa......good news ar......but still missing the undertray wor........

作者: combatfung 時間: 2006-9-2 02:04
yes ah , especially thanks bro icky, he give me the gear box for repairing , bro minimini , did U have the under tray ??

作者: ming 時間: 2006-9-2 02:19

原帖由 combatfung 於 2006-7-1 18:59 發表
let check with the photo, all the stuff is re-install into the chasis last night!

cam嘅大銅頭大炭刷摩打,tekin電變,全部都係正嘢喎

作者: minimini 時間: 2006-9-3 00:55

原帖由 combatfung 於 2006-9-2 02:04 發表
yes ah , especially thanks bro icky, he give me the gear box for repairing , bro minimini , did U have the under tray ??

oh.......I don't have any extra undertray ar........

I think the ZX5 shell don't have the undertray.......or you can buy a big piece of lexan plate (in Sun Tin Day Street).......& DIY the "custom-made ZX5 undertray"........

作者: combatfung 時間: 2006-9-3 02:15
OIC, or anyone have the gear cover???

作者: paulhung 時間: 2006-9-7 02:47
i have undertray & gear cover, any one want to buy?

作者: barrypops 時間: 2006-9-9 02:03

原帖由 combatfung 於 2006-9-2 00:44 發表
finally , i bought the Lzxer ZX-5 shell at KWS today , after some cutting work ...........is fit the old lazer , i think is not bad wow ,,,,, if someone want the shell for old lazer, this is one of ...

Hi ! Which shop in KWS you bought this ZX-5 body ?

作者: combatfung 時間: 2006-9-9 09:03

原帖由 barrypops 於 2006-9-9 02:03 發表

Hi ! Which shop in KWS you bought this ZX-5 body ?

鴻 x ah

作者: barrypops 時間: 2006-9-9 13:54

原帖由 combatfung 於 2006-9-9 09:03 發表

鴻 x ah

Thanks !

How much ah ?

作者: paulhung 時間: 2006-9-9 18:53
hi brothers, please check pm about the Lazer gear cover, sorry I just back to HK.

作者: combatfung 時間: 2006-9-10 02:38
$ 126 ........only , without sticker

原帖由 barrypops 於 2006-9-9 13:54 發表

Thanks ! How much ah ?

作者: barrypops 時間: 2006-9-11 02:24

原帖由 combatfung 於 2006-9-10 02:38 發表
$ 126 ........only , without sticker

Thanks so much !

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://rc-evo.com/xbbs/)