RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: HPI Cup Racer 評價 [打印本頁]

作者: 1524 時間: 2010-6-12 19:19
標題: HPI Cup Racer 評價
有無ching玩過hpi cup racer?
未知評價如何?
搜索過舊post, 好多ching都話d 殼靚(我都係咁話).
不過好似無ching comment過架車好唔好玩~

作者: truckman 時間: 2010-6-13 22:07
回復 1# 1524

not good

作者: hk_sdu 時間: 2010-6-14 11:59
No parts -> so no one play -> and no answer here

作者: 1524 時間: 2010-6-14 22:42
回復 3# hk_sdu

真係咁大鑊?
衰架車本身定係衰代理無parts呢....唉~

作者: truckman 時間: 2010-6-14 23:03
回復 4# 1524

2樣也是............衰

作者: skyfire 時間: 2010-6-15 10:16
得個殼靚, 無咩好:p

作者: gavl 時間: 2010-6-15 15:42
don't know the AE86 / 240Z will fit on M04?

作者: janlai1018 時間: 2010-6-17 12:49
我有部hpi cup racer
for fun........OK

作者: 1524 時間: 2010-6-17 12:53
回復 8# janlai1018

thank you.

我見個設計幾有心思 (都幾多setting, 軸距同shock位置都可變),
個殼又靚, 所以心郁郁.

我估佢perfromance 都一定會好過M03, M05卦....話晒都4WD.

作者: hk_sdu 時間: 2010-6-17 16:00
For good performance, go for 4WD m-chassis, eg, 211GO, VM2

Then use HPI 靚殼. HPI AE86 is very nice.

BTW, M05 performance is not bad

作者: gavl 時間: 2010-6-17 16:17
but HPI AE86 is 225mm, right?

作者: 1524 時間: 2010-6-17 16:23
回復 10# hk_sdu

咁又係....hpi 同vmii, 211go 價錢都相差不遠~
講講o下...可能就咁買cup racer d shell 算喇

作者: szbubu 時間: 2010-6-17 20:44
but HPI AE86 is 225mm, right?
??

作者: rabbitmomo 時間: 2010-6-18 00:02

but HPI AE86 is 225mm, right?
??
szbubu 發表於 2010-6-17 20:44

登錄/註冊後可看大圖

yes, that's why the cup racer is come with different combination of poles in order to fit any M-body from 210-225mm !

作者: pp1 時間: 2010-8-8 07:42
Hi, first post here.

Just got one today, not had time to put it together yet

will report back as soon as...

作者: nel3838 時間: 2010-8-8 14:51
VMII and 211Go very good ahhh..... I think VMII has more following, maybe next investment for me.

But how about trying this out, if you have old Mini inferno . . .. lighter?

http://bbs.rc-evo.com/viewthread.php?tid=179628

作者: pp1 時間: 2010-8-16 19:09
Finish putting it together last friday!
Just a few pic.

登錄/註冊後可看大圖

作者: 1524 時間: 2010-8-16 19:15
回復 17# pp1

looks good!
waiting for your performance review

作者: pp1 時間: 2010-8-16 19:16

登錄/註冊後可看大圖

作者: pp1 時間: 2010-8-25 15:51
my 2 cent...
After playing around with the cup racer for last 2 weeks, I can confirm with Ching above

As standard it's good for fun, and having just finished a TA05 the quality of material and finish of hpi is way better than starstar.

Spec:
Hwing 9T BL motor
35A ESC,
Sw**p 40R tires,
210mm wheelbase,
4mm wheel offset.

First I know the 9T is way too fast for the car, manual recommend a 30T

but you never know until you try. I've only tried the the can at Jordan valley, which by the way is amazing. I can't tell you much about the handling as this is my first 1/10M, and most thing is adjustable as standard, so you can set it to what you like understeer, oversteer and extreme oversteer like me

But as with most M cars its turn in is sharp...may be too sharp for jordan valley...

Parts wise, I haven't had any problem finding replacement parts. I know there isn't much parts for the cup racer at KWS, but I use a HK online store and all replacement part I need is there. And if you've seen me at jordan valley, you will know from my crashes I needed many parts

And as for upgrade parts...its very limited, unless you go to the US sites. Like many Ching said before, if you want a real racer go for a vmii or 211 whatever. But you are looking at paying double the price of the cup racer (kit to kit, no body), I got mind at KWS for $8XX without body. I couldn't bare seeing the 240z being destroy

There is only one problem I see wrong with the cup racer, that's the silliest thing I've seen in rc design...that's to mount everything on the top deck

??? Everything means Battery, servo, radio, and esc. And there is no way to mount it any other way, this makes the C of G so high it wants to roll over at every corner (note w/ a 9T motor). I've tried stepping down to a 13T but still roll roll roll, I have just put a 540 motor in today so we'll see.

In conclusion, my opinion is that this is a great car to start with if you never played rc car before or just starting to getting into track driving like me. It can teach you a lot about car setup, as most angle are adjustable as standard. There is also many bodies you can choose from, the kit give you a million different options for mounting body post as standard, also you can switch between 210mm and 225mm wheelbase to suit. Yes the M05 is cheaper, but since I haven't had a chance to play with a M05, I can't compare the two. (maybe some kind Ching is willing share) My cup racer has got me so fired up, I've just bought a T3

which has about a million more adjustment to play with.

作者: 1524 時間: 2010-8-25 16:59
Thank you for your detail report. I think I will go for it after finishing my FF03.

Let's see at JV!

($8XX....I guess you brought from "eating congee")

作者: pp1 時間: 2010-8-26 02:18
haha, yes I only eat congee

Also I found a good forum for cup racer, might be useful.
http://www.rctech.net/forum/elec ... -hpi-cup-racer.html

作者: fatchickterian 時間: 2010-8-31 09:18
Hi there, it's nice to see a cup racer's supporter after all the negative comments about the chassis.

Well, I'm one of the cup racer's owner too, I loved it from opening the box till finish building it, and till now (after running it for the 4th times). I agreed to this CHing about the quality of the material!

I'm running mine with Novak GTB ESC & 13.5T SS motor, still using standard spur and pinion, and I'm very happy with the performance during corners, however it's a little not fast enough on straight road (I think).

Yeah, I'm aware of the body rolling issue as well, but I think it would be improved by changing over with a set of hard springs or possibly changing the shock oil, the standard ones are too soft.

Anyway, I think you've may a good chose of buying the cup racer but not M05, it would be very hard to control for a beginner, as being a FF chassis. I alway bit my friend's M05 Pro in the corners, ha ha.

作者: spider5566 時間: 2010-9-4 14:33
这车车的骨架不错用料很足 OP件补品不多用来HIGH ！just for fun！！

作者: yakuza 時間: 2010-9-5 13:11

Hi there, it's nice to see a cup racer's supporter after all the negative comments about the chassis ...
fatchickterian 發表於 2010-8-31 09:18

登錄/註冊後可看大圖

Lets think about the M05 with crappy tires and ESC has not setup correct, but you only can bit it at the corners, thats mean you HPI is a piece of shlt or you have shltty driving skill.....Hahaha..

作者: fatchickterian 時間: 2010-9-6 09:34
回復 25# yakuza

Oh, Sorry about offending all the M-05's driver! Ha ha!!

作者: gavl 時間: 2010-10-27 02:38
我都啱啱買左cup racer玩下，希望唔好太差。

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://rc-evo.com/xbbs/)