RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: how come TA05's belt is broken easily [打印本頁]

作者: garyx    時間: 2010-6-13 19:13
標題: how come TA05's belt is broken easily
I built this TA05 since CNY... but the belt has been broken for 3 times since then...
is it usually or not ? ... the whole car use original parts except the 4300kw motor...
作者: milkboy    時間: 2010-6-13 23:44
Check the tension of the belt to see whether it's too tight or loose.
Both of them will affect the life of the timing belt.
^^v
作者: rhkp    時間: 2010-6-13 23:51
blue or black one??
作者: rhkp    時間: 2010-6-13 23:51
i haven't liked that??
作者: abba    時間: 2010-6-14 23:06
Check your car first, should be caused by abnormal use for frequent damage of belt...
作者: garyx    時間: 2010-6-15 00:07
thx thx Ching...
I broken both blue and black one ...
need to get a new pair tmr
作者: blackxjack    時間: 2010-6-15 20:20
Seems the belt set as too tight, im havn't broken yet.@on rd + 9t@
作者: AMAT    時間: 2010-6-20 13:58
斷皮帶好多原因.....最大原因係因為TENSION出現咗問題.

我見到新手最常出現O既,係較到條皮帶TENSION好硬.....扯到行晒.....咁實易斷.
另外就係TA05果珠差個TENSION卡位SET錯,左右兩邊都唔同位置,令條皮帶扭埋一邊.

兩個都係我常見到.

要處理,第一,睇清楚個珠差TENSION位有冇左右兩邊唔同位置,唔知就望清楚說明書點SET.
皮帶TENSION咩叫O岩,用手指按落去,有1.5-2MM O既鬆向下按到,咁就為之正確.

CHECK真個問題,自然就會冇事.

我玩TA05咁耐,從來只係皮帶輪玩完,條皮帶都未瓜.




歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://rc-evo.com/xbbs/) Powered by Discuz! X3.2