RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: 問Servo問題：9602VS9650 [打印本頁]

作者: Waijeff 時間: 2010-9-3 18:29
標題: 問Servo問題：9602VS9650
其実有無分別？

作者: beebee 時間: 2010-9-3 19:47
扭力同速度數據上2者已經有分別.....仲有9602係行金屬齒....而9650係行膠齒......我自己兩者選擇會係9650......道力會柔順好多o架

作者: Waijeff 時間: 2010-9-3 20:26
最後一問：9650可行Kyosyou的10年前1:8的NSR 500？？？

感謝。

作者: 葉生 時間: 2010-9-3 20:32
冇問題...行到....

作者: alex1030 時間: 2013-4-24 11:19
Hello C hing, I bought a second hand Dee bike here and I am rebuilding it. The original servo is dead , is 9650 the servo I needed? Because I bought two mini servo online and the bike's original servo horn cannot fit into the servo.

Therefore, I want to confirm that 9650 is good for the Kyosho dee bike.

Thank you very very much for your answer!!!

作者: ballhk58 時間: 2013-4-24 12:46

alex1030 發表於 2013-4-24 11:19

登錄/註冊後可看大圖

Hello C hing, I bought a second hand Dee bike here and I am rebuilding it. The original servo is dea ...

師兄......就算你買左futaba 9650 個servo位都係唔啱裝，因京商dee既車架已經係廿年前既出品，所以裝servo既方置係要適當既改動先裝得正確，有時間就留意下我地約放車既活動，拎架車同工具出黎交流下，你就會知點整

作者: alex1030 時間: 2013-4-24 14:26
Oh...I live in Sydney. I would love to Rc with you guys one day. I guess I may need to bring it to HK next time. Thank you so much for your reply.

And may I ask one more thing, If i want a modern 1/8 bike, is the ZH 203 the best ?

作者: ballhk58 時間: 2013-4-24 17:57
兩架都有人玩但要睇場地，因兩架係轉向方面係兩個唔同既設計

作者: alex1030 時間: 2013-4-25 07:21

ballhk58 發表於 2013-4-24 17:57

登錄/註冊後可看大圖

兩架都有人玩但要睇場地，因兩架係轉向方面係兩個唔同既設計

Oh really? Which one has a better turning? Or which one is better for fast track?

作者: ballhk58 時間: 2013-4-25 23:07
話邊架好呀？？我都係只玩京商dee，但亦識車會會員用ZH，但佢要攪左好耐先好走，京商係灣係會比較靈活

作者: alex1030 時間: 2013-4-26 08:49
Thank you C hing, is there any tips for making the Kyosho bike to turn better? Any hop up parts will help it to turn sharper?

Because , when I got the second hand bike, it does not want to turn at all, I suspect it is the problem of the servo, but I yet to buy the right servo yet, therefore I cannot try.

Bascially, do u mean the original setup of the bike should be good at turning?

作者: ballhk58 時間: 2013-4-26 17:11
其實架dee想好走係有好多野要diy

作者: ballhk58 時間: 2013-4-26 17:20
本帖最後由 ballhk58 於 2013-4-26 19:52 編輯

作者: alex1030 時間: 2013-4-27 22:39

ballhk58 發表於 2013-4-26 17:11

登錄/註冊後可看大圖

其實架dee想好走係有好多野要diy

One day, I really need to bring my bike back to HK and learn from you guys!!!

作者: alex1030 時間: 2013-5-3 10:43
Finally, my kyosho bike is all setup. I m now using Hitec HS - 85MG and it fits very well !!!

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://rc-evo.com/xbbs/)