RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: short video @JV [打印本頁]

作者: FatboyHK 時間: 2010-10-19 01:31
標題: short video @JV
http://www.youtube.com/watch?v=rWi6sM6WoYg
http://www.youtube.com/watch?v=NVhJIgCC5HE

作者: sex8088 時間: 2010-10-19 05:30
is it f104 pro?

作者: FatboyHK 時間: 2010-10-19 10:01
Yes F104 with 8.5t and RIDE tires

作者: wing3pks 時間: 2010-10-19 14:49
回復 3# FatboyHK
請問師兄用咩電變架?

作者: FatboyHK 時間: 2010-10-19 15:59
It is a second hand lrp sphere tc spec

作者: samuel20461 時間: 2010-10-19 21:42
Ching what gear ratio ah?
Thx

作者: FatboyHK 時間: 2010-10-20 00:10
25 / 104

作者: manhunt 時間: 2010-10-20 00:22
fast wor
what about front spring?

作者: sing.kh8212 時間: 2010-10-20 00:29
直路好快吓.仲好定

作者: Marco明 時間: 2010-10-20 00:40
樓主可以分享下setting嘛~~~

作者: CIVICMAN 時間: 2010-10-20 00:49
左被右被被Buggy精彩技術師兄

作者: FatboyHK 時間: 2010-10-20 01:00
front tire: RIDE Hard

front spring: Soft

front ride height: default

Camber: 0 degree (Use 3 Racing Option part... Tamyia option part does not allow 0 degree, minimum is 1 degree)

Toe-out: about 1 degree

rear tire: RIDE Medium

rear t-plate: 1.3mm (3 Racing one-piece)

rear ride height: 1 step down

But in these video, I used RIDE Medium front tires, because I crashed with a stupid kid and broke a front wheel, and I ran out of spare part.... Use medium front tire, may be quicker in in-field sector but is less stable... I believe average lap time will be a bit slower.

作者: FatboyHK 時間: 2010-10-20 01:02
回復 11# CIVICMAN

yes, that buggy was controlled by that stupid kid....

作者: maxchow 時間: 2010-10-20 01:02
差 D 比鬼仔 buggy KO

作者: FatboyHK 時間: 2010-10-20 01:47
本帖最後由 FatboyHK 於 2010-10-20 01:50 編輯

you guy wanna see how I crashed with that buggy?

http://www.youtube.com/watch?v=c29u_XDKfJQ
crashed during my warmup laps.....

作者: Marco明 時間: 2010-10-20 10:05
本帖最後由 Marco明於 2010-10-20 10:06 編輯

front tire: RIDE Hard

front spring: Soft

front ride height: default

Camber: 0 degree (Use 3 ...
FatboyHK 發表於 2010-10-20 01:00

登錄/註冊後可看大圖

thx for your advice~~~
我之前用星星原廠頭呔......明顯咬好多.....超級over steer
後來試左一次頭用硬彈弓去減低車身傾則就好好多......而家架車幾夠轉又ok穩定....要再試真d先得
my setting :
頭呔 : 星星stock
頭camber : 1.0
頭toe-out : 1.0
尾呔 : ride super soft
星星high traction t-bar + 2 o-rings
頭ride height : middle spacer on top, small+large on bottom
尾ride height : 2 step down
motor : 星星有刷 23 turn

作者: FatboyHK 時間: 2010-10-20 10:16
I believe now it is still too hot to use rear super soft. Try medium.

作者: Marco明 時間: 2010-10-20 10:30

I believe now it is still too hot to use rear super soft. Try medium.
FatboyHK 發表於 2010-10-20 10:16

登錄/註冊後可看大圖

agree.......但就黎冬天費事開套新呔

作者: manhunt 時間: 2010-10-21 00:39
有人用high traction t-bar，
有人用軟，
咁扭d好，定硬d好？
原裝算係軟，中，定硬呢？

作者: FatboyHK 時間: 2010-10-21 01:00
回復 19# manhunt

it really depends on track condition and personal preference... for instance, some people will think my car is too push, but I like it because it is stable and easy to control

作者: Marco明 時間: 2010-10-21 10:22
本帖最後由 Marco明於 2010-10-21 10:26 編輯

有人用high traction t-bar，
有人用軟，
咁扭d好，定硬d好？
原裝算係軟，中，定硬呢？
manhunt 發表於 2010-10-21 00:39

登錄/註冊後可看大圖

原裝黑色屬於硬, option有軟, high-traction係再軟d
正常t-bar越軟車尾就越咬地....

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://rc-evo.com/xbbs/)