RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: MR-02 Bearings 裝係咩位置 [打印本頁]

作者: username 時間: 2006-8-15 16:01
標題: MR-02 Bearings 裝係咩位置
Hi all,

How many bearings are there in a set? I got 7 on my set, I have placed it on every where it should go, one wheel is missing one of the bearing? have I put bearing in a place that I shouldn't have? or there is 1 bearing missing?? Thank you for answering

作者: Evo5 時間: 2006-8-15 16:07
7 is right

作者: Evo5 時間: 2006-8-15 16:09
4 smallest for front wheel , 2 athe the motor mount, and 1 for the rear wheel (gear side only ! )

作者: mikewu 時間: 2006-8-15 16:09
There should be one side that is on the rear axle that does not need bearing. Tell you the truth I don't remember which side but either one of the rear wheels does not need bearing. Roll it and check it yourself. 7 pcs is correct like Evo5 says...

作者: username 時間: 2006-8-15 16:15
WOW, this place is great, I have only post this question a short while, all you guys are so willing and helpful! Thank you!! While I am here, if you guys have a Mr-02, what would you get for tuning? Sorry for asking such lame question, but I am still new to it. Thank you!

作者: Evo5 時間: 2006-8-15 16:21

原帖由 username 於 2006-8-15 04:15 PM 發表
WOW, this place is great, I have only post this question a short while, all you guys are so willing and helpful! Thank you!! While I am here, if you guys have a Mr-02, what would you get for tuning ...

first of all, the motor mount is a must to replace, there are quite a few brand make good motor mount, ie. ATM or 3 racing, then is the graphite T-plate, although is an I shape, but we still called it T-Plate, This item I would suggest to buy the kyosho one, dimensions are much precise

作者: Evo5 時間: 2006-8-15 16:25
actually there are many to change kekeke,
the front turning block, King pin, Char Char, oh Ball diff etc
take a look at this page just to give u an idea of what is it !
http://www.3racing.com.hk/x_prod ... ni-Z%20MR-02%20(MM)

[ 本帖最後由 Evo5 於 2006-8-15 16:27 編輯 ]

作者: username 時間: 2006-8-15 16:27
So I guess by changing motor mount, I would need to change Motor too, I have the FET version MR02 (just the chassie one). Speed is not the main thing, I prefer to have a user friendly (easy to handle) car. Do I need to change the ball diff for extra smoothness? thank you

作者: username 時間: 2006-8-15 16:31
I see...I guess I am going to get poisoned sooner or later with all these modifications lol!! thank you!

作者: Evo5 時間: 2006-8-15 16:35
It has to be modifly to have good handling !

作者: mikewu 時間: 2006-8-15 16:40
I suggest to use a Ferreri ENZO cover for the easiest handling... It has a slight "understeer" which makes cornering much easier. The NSX cover is also good but it corners "too fast" in my taste... takes some practice to handle it well...

作者: samy 時間: 2006-8-15 16:45
i'll recoment fairlady500 too, it look nice and well proformance on track.

作者: username 時間: 2006-8-15 16:46
hahaha okok...I shall go down KWS have a look, do you guys have MR-02?

作者: david6680 時間: 2006-8-15 16:47

原帖由 username 於 2006-8-15 16:46 發表
hahaha okok...I shall go down KWS have a look, do you guys have MR-02?

I M PLAYING MR02 ENZO SHELL

作者: username 時間: 2006-8-15 16:49

原帖由 david6680 於 2006-8-15 16:47 發表

I M PLAYING MR02 ENZO SHELL

OOO, you got any photos? and set up informations? I remember you were very helpful on my other thread!! Thank you!

作者: Evo5 時間: 2006-8-15 17:02
If u setup the car in the right direction, then most shells are just ok to be race......
Saw a guy with a beetle shell the other day , the handling is sooooooo good !

作者: david6680 時間: 2006-8-15 17:02

原帖由 username 於 2006-8-15 16:49 發表

OOO, you got any photos? and set up informations? I remember you were very helpful on my other thread!! Thank you!

我部車原裝ad 車，所以係ad pcb。
改裝有：
1. bearing
2. 京商kingpin
3. atm 金屬轉向杯
4. atm cha cha
5. atm ad motor
6. atm 珠叉 (不過珠叉京商好d)
7. atm 98mm motor 架
8. H 板
9. TIRE頭20 尾10 (FOR 14/F PLAY)

當然，仲有控，電，CHARGER個D野啦

作者: david6680 時間: 2006-8-15 17:03

原帖由 Evo5 於 2006-8-15 17:02 發表
If u setup the car in the right direction, then most shells are just ok to be race......
Saw a guy with a beetle shell the other day , the handling is sooooooo good !

beetle shell係PLAY AWD？？

作者: username 時間: 2006-8-15 17:07
Beetle? wow, I guess its just practice, practice and more practice and find the right tuning for myself, what do you mean by Ad car? and Ad motor? and Cha Cha?? thank you!

作者: david6680 時間: 2006-8-15 17:13

原帖由 username 於 2006-8-15 17:07 發表
Beetle? wow, I guess its just practice, practice and more practice and find the right tuning for myself, what do you mean by Ad car? and Ad motor? and Cha Cha?? thank you!

AD CAR (COPY FROM MMS)

AD 電子版, 次世代miniz 底版,
數碼servo, 行fm 25mhz,
本身有兩對3010 fet, 已可配合市面上任何摩打,
輸出power 大過舊am 版.
轉向, 油門動作比以前細緻, 線性
再可配合電腦專用軟件, 改變 servo, 油門setting
油門輸出頻率, 可作三段調整,
高頻: 慳電, 高轉
低頻: 大力, 但耗電
各方面都比舊am版優勝.
但只可配合ex10, 或ex1 mars 使用
所以你見車場, 咁多人用ex10

AD MOTOR (AD Stock Motor)
http://www.rcatomic.com/main/modules/tinycontent/index.php?id=24

CHA CHA

登錄/註冊後可看大圖

作者: username 時間: 2006-8-15 17:34

原帖由 david6680 於 2006-8-15 17:13 發表

AD CAR (COPY FROM MMS)

AD 電子版, 次世代miniz 底版,
數碼servo, 行fm 25mhz,
本身有兩對3010 fet, 已可配合市面上任何摩打,
輸出power 大過舊am 版.
轉向, 油門動作比以前細緻, 線性
再可配合電 ...

wow, how much will that modification cost?

作者: david6680 時間: 2006-8-15 17:37

原帖由 username 於 2006-8-15 17:34 發表

wow, how much will that modification cost?

ad車唔好改住，play下am先啦。ad 車又要改pcs 又要買控。

作者: username 時間: 2006-8-15 17:42

原帖由 david6680 於 2006-8-15 17:37 發表

ad車唔好改住，play下am先啦。ad 車又要改pcs 又要買控。

Yeh, thats what I thought, it would be probably for racing...I just want mini z for weekend fun...also must be very expensive to change all that!

作者: prince2005 時間: 2006-8-15 22:15
我想問下呢 e家kws咪有d只賣mr02車既又話加左30%性能
其實個d同原本個d有咩分別呢?? 另外如果將個d車轉成ad pcb底板又好唔好呢??

作者: 老v 時間: 2006-8-15 23:55

原帖由 david6680 於 2006-8-15 17:02 發表

我部車原裝ad 車，所以係ad pcb。
改裝有：
1. bearing
2. 京商kingpin
3. atm 金屬轉向杯
4. atm cha cha
5. atm ad motor
6. atm 珠叉 (不過珠叉京商好d)
7. atm 98mm motor 架
8. H 板
9. TIR ...

原裝ad車請問在那有售?

好想買返部喔

作者: username 時間: 2006-8-16 09:26

原帖由 prince2005 於 2006-8-15 22:15 發表
我想問下呢 e家kws咪有d只賣mr02車既又話加左30%性能
其實個d同原本個d有咩分別呢?? 另外如果將個d車轉成ad pcb底板又好唔好呢??

I haven't tested the car yet, so I am not so sure, but I wanted a RTR package, no one had any MR 02 RTR, so I had to pick and mix myself....I sure do hope it is a good package I have? right?

作者: david6680 時間: 2006-8-16 10:05

原帖由 prince2005 於 2006-8-15 22:15 發表
我想問下呢 e家kws咪有d只賣mr02車既又話加左30%性能
其實個d同原本個d有咩分別呢?? 另外如果將個d車轉成ad pcb底板又好唔好呢??

MR02 話加左30%性能係用 awd fet 比起之前mr02個fet係加左30%性能，

如果將個d車轉成ad pcb底板又好唔好呢?? ......90% 香港player 都係咁做

作者: david6680 時間: 2006-8-16 10:07

原帖由老v 於 2006-8-15 23:55 發表

原裝ad車請問在那有售?

好想買返部喔

mr02mm 出過兩部原裝ad車紅色同黑色enzo。我係起日本買的

作者: david6680 時間: 2006-8-16 10:07

原帖由 username 於 2006-8-16 09:26 發表

I haven't tested the car yet, so I am not so sure, but I wanted a RTR package, no one had any MR 02 RTR, so I had to pick and mix myself....I sure do hope it is a good package I have? right?

你用緊嘜控？

作者: prince2005 時間: 2006-8-16 12:55
哦

作者: username 時間: 2006-8-16 13:24

原帖由 david6680 於 2006-8-16 10:07 發表

你用緊嘜控？

I cant remember the model number, all I know is Futaba...it was a cheap one....

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://rc-evo.com/xbbs/)