Hyperion EOS 0615i DUO3+ charger - 2 x 6S, 2 x 15A max, 600W
Charger delivered with HP and XH lipo adapter plates, USB cable and clips., EOS 0615i DUO3+ DC INPUT 11V~28V, 6S Max, 300W 15A Max Charge Per Port , 50W+50W 10A Discharge, SYNC Charge up to 2x6S for max 12S Flightpacks at 600W max.作者: BLS 時間: 2010-12-12 19:34
WOW, 好貴, 買B6 夠用作者: milkboy 時間: 2010-12-12 20:37
B6 點夠用......
得果5-6A 差........
差電太耐喇~~~作者: arto6 時間: 2010-12-12 20:48
魔鬼呀.........作者: maxchow 時間: 2010-12-12 21:46
亞祖打左電話俾我喇,
不如,幫你攪埋喇。
呵呵呵~~~~作者: yc854 時間: 2010-12-12 22:27
arto6 comeon use this charger can get champion again, again and again. hohoho~~作者: 天娜 時間: 2010-12-12 22:31
Ching 你用咩火牛o係依部差機呢, 我用緊615 Duo3, 我唸火牛要有3X A以上作者: milkboy 時間: 2010-12-12 22:37 回復 19#yc854
YES, of course....
^^~作者: milkboy 時間: 2010-12-12 22:39 回復 20#天娜
我都諗緊........
可能都要買部 24V,30A UP 既火牛先發揮到佢既威力。
^^~作者: hk_sdu 時間: 2010-12-13 14:37
One more thing is, we use this charger to charge with HIGH voltage. Max up to 8.5X volt, still have not problem with my battery.
火牛 29A China brand, enough for 10A x 2 channels, unless u charge with 15A x 2 channal at the same time.作者: seven 時間: 2010-12-13 14:43
回復 maxchow
max ching....
你講得岩.....
由我早幾年開始玩電直開始,
就發覺對差機要求好高,
...
milkboy 發表於 2010-12-12 22:06
唔用盡 2X 15 A, 30A的都應該夠晒了作者: hk_sdu 時間: 2010-12-13 14:51
Normal practice, charge up to 8.4 or 8.5v, play 6-8 mins, down to 7.6v (3.8v per cell)
U will be able to charge back around 4000Mah, the charge back Mah from the charger is an "estimation" of the charger. Not so meaningful.作者: seven 時間: 2010-12-13 15:00 回復 27#hk_sdu
應該係差既時間長好多,同個量無關係。
都係差咁多mah......作者: Evo5 時間: 2010-12-14 00:46
I think this charger is quite good
Is it Use smaller A charge will it be better for the battery ?
I mean long last the life ??作者: milkboy 時間: 2010-12-14 00:47 回復 30#Evo5
CHING.......
Yes for sure..........
Normally for all type of battery....作者: Evo5 時間: 2010-12-14 00:54
But I believe there is a max limited on the capacity base on the standard dimension right ??
otherwise the battery will be bigger and bigger and will not be able to put on the 1/10TC作者: milkboy 時間: 2010-12-14 20:25 本帖最後由 milkboy 於 2010-12-14 20:28 編輯
------ UPDATES FOR v3 Series CHARGERS CURRENTLY IN PRODUCTION -----
DOWNLOAD 0720i NET3-AD (ac/dc) v5.00 Firmware - Release date SEPT 23 2010
This is the firmware for 0720iNET3 AD only.
DOWNLOAD 0720i NET3 v5.00 Firmware - Release date SEPT 23 2010
This is the firmware for 0720iNET3 only.
DOWNLOAD 0615i DUO3 v5.00 Firmware - Release date SEPT 23 2010
This is the firmware for 0615iDUO3 only.
v5.0 Major changes and additions to support EOS SUITE (ECDS) Software improvements, and further PB charge enhancements
ECDS dated Sept 23 2010 or later is required if using v5.0 fw
v4.7 Mainly refinements to PB charge/discharge, with some minor changes for ECDS software
v4.3
* Enables EOS PC Control and Data Suite Software!
* Adds adjustable terminal voltage for PB (lead-acid charge)
* Adds FLOAT MODE to PB charge
* Changes PB Charge to true Bulk/Absorption/Float charge model (float optional)
* Adds OFF setting for PB Safety Timer (must be OFF for continuous FLOAT MODE)
v3.2 (the first fw update release for hardware v3 NET & DUO)
* Added Terminal Voltage Control Function (TVC). You MUST read this EXPLANATION before using TVC!!
* Changed Cooling Fan control such that the fan is stays on if case temp exceeds 45C, until falling below 40C.
NOTE: EOS Insight Logging Software must be version 1.5.0.46 or later if using v3.2 NET/DUO firmware.作者: lung1 時間: 2010-12-22 17:39
有無需要update 呢?作者: 天娜 時間: 2010-12-22 19:57
Thanks lung1作者: Billysi 時間: 2010-12-23 02:13 系時候換血了,,A6PLUS雖然好,,但系HYPERION更好啊作者: rcmimi 時間: 2010-12-26 10:49
有版友都係賣緊部megapower 2014...好似都係300w+300w output~~賣12xx only?作者: boyboy 時間: 2011-1-1 23:42
呢個Hyperion 0615i DUO 3+係米有2款........一款150w+150w.....另外就係300+300??????作者: milkboy 時間: 2011-1-1 23:58 本帖最後由 milkboy 於 2011-1-2 00:32 編輯