RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: 想請教一下D無刷問題~ [打印本頁]

作者: pppo1112    時間: 2011-1-2 00:25
標題: 想請教一下D無刷問題~
咁多位師兄~我已多年冇玩RC 而家想玩返~不過我想學下現時D無刷 係點既~ 我見市面上有D 係咩3.5T呀4.5T呀咁~又有D 3000KV呀3500KV呀咁~咁係有咩分別呢??? 3.5T同4.5邊個係扭力大D呢?同樣3000KV果D又係幾多千係扭力大呢????同埋又見好多A數既電變~咁有冇話幾多A佩幾多T既魔打呢?? THX!咁多位師兄教教我~THX!!!
作者: bigheman    時間: 2011-1-2 01:02
Hi

I can only let you know part of it.

xxxx KV means, each the motor will turn at xxxx RPM at 1 volt. So if it is 3000KV, means at 7.4V. It will spin at 3500 x 7.4V RPM = 25900 RPM. I guess then people covert it back to RPM what say 10T brushed motor RPM etc.

For the ESC, the A is the max current that the ESC can handle, it depended on not just the motor but the gearing the car will run (loading), if your whole system draws more then the ESC and handle, you will in the risk of killing the ESC.

but I don't know about the torque lah, sorry




歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://rc-evo.com/xbbs/) Powered by Discuz! X3.2