RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: 進軍Formula One.......F103 我黎喇.... ^^~ [打印本頁]

作者: milkboy 時間: 2011-1-5 19:40
標題: 進軍Formula One.......F103 我黎喇.... ^^~
我又攪事喇.......
我個老友不斷放毒.......
最後...今日解左毒..........

F103 我黎喇.........
^^b

作者: milkboy 時間: 2011-1-5 19:41
^^~
remark.........
嘻~~嘻~~
重點係....
一張金牛多少少.....
攪掂....
^^v

作者: hk_sdu 時間: 2011-1-5 21:09
恭喜恭喜, 全部好野! Full option!

散砌最環保, 零廢料

作者: hk_sdu 時間: 2011-1-5 21:12
HKD 1000 only? Good deal

- carbon lower & upper deck chassis
- Alu 1 piece motor mount
- 1,2,3 degree camber steering cup + Carbon front arm
- Le Mans body
...

作者: abcde 時間: 2011-1-5 21:22
有沒parts list....咁會使更多人玩假 pro 10....

但我要平呔呀 !!!!

真pro 10 呔都係under $200

作者: hk_sdu 時間: 2011-1-5 21:39
平呔 ok, change to 103GT wheel hub and play GP Foam tires, $100 = front and rear

作者: hk_sdu 時間: 2011-1-5 21:42
or play F1 rubber tire, PRO 10 do not have rubber tire, cannot use 1:10 GP foam tire.

That's why me and Milkboy like 假 pro 10

一雞兩味, 換bumper, 又F1, 又 LeMan, 1k 重想點?

作者: hk_sdu 時間: 2011-1-5 21:46
3 *Yeah Racing (#F103GT-014SV) Aluminum Main Drive Shaft (SV) For  USD$8.37
1 *Yeah Racing (#F103RM-006BK) Aluminum Knuckle Arm & Servo Saver  USD$16.67
1 *Yeah Racing (#F103RM-013BK) Aluminum Motor Mount Single Piece (  USD$11.06
2 3Racing (#F103GT-03) Low Fraction Pads  USD$5.80
1 3Racing (#F103GT-06/WO) Graphite Friction Damper  USD$4.00
1 3Racing (#F103GT-22) Alum Friction Damper Post  USD$3.90
1 3Racing (#F103GT-24) Friction Damper Spring Set  USD$2.00
1 3Racing (#F103RM-08) Graphite Upper Deck For F103RM  USD$8.50
1 Blade Racing (#BL014) TWR XJR14 For Tamiya F103  USD$20.90
1 Kawada (#FOB582) F1 Spur Gear 48P 82T W/Balls  USD$5.90
1 Tamiya (#50505) F1 T-Bar For F103 Chassis  USD$3.90
1 Tamiya (#50506) F-1 Spare Gear Set  USD$3.20
1 Tamiya (#51346) F103 Thrust Set  USD$3.90
1 Tamiya (#51347) F103 Disc Ball Set  USD$2.20
2 Tamiya (#53248) Formula Lightweight Diff Joint Set  USD$11.80
1 Tamiya (#54153) F103 Carbon Reinforced Sus Arms  USD$6.50

Yeah racing 大約56算
Tamiya, blade, all others, 大約8算

作者: lung1 時間: 2011-1-5 21:48

or play F1 rubber tire, PRO 10 do not have rubber tire, cannot use 1:10 GP foam tire.

That's why ...
hk_sdu 發表於 5/1/2011 09:42 PM

登錄/註冊後可看大圖

係一雞三味, 仲有103GT

作者: abcde 時間: 2011-1-5 21:49
agree...it true....

ching now use what degree front GP foam tire as you before say run out of front tire...
mine now use old GP front tire dia around 55 to 58...but rear only have 54mm (F1 tire)
it look some

作者: hk_sdu 時間: 2011-1-5 22:12
1:10 GP tire usually 37F 35R, or 35F, 32R

the problem is some LeMans body wheel arc is very small but GP tire, diameter is larger than F103 tire. May need to trim down the foam.
On the other hand, large diameter wheel make your car run faster (larger rollout) and more stable

作者: hk_sdu 時間: 2011-1-5 22:17
回復 9# lung1

其實係一雞四味, some people use touring body, Speed6 with F103GT
可能係世上最多玩法RC, 星星問你服未?

作者: abcde 時間: 2011-1-5 22:22
thx info...colt body 200mm is for oil car...that fit those GP foam tire
<-------protoform one and those for f103 are small wheel arc....that why i need open arc very large.....
but this body should be retire soon (broken alot)...so let it be

作者: hk_sdu 時間: 2011-1-5 22:44
本帖最後由 hk_sdu 於 2011-1-6 00:20 編輯

i think i blow too much water here, need to post some picture of my 103

1. F1 - stock spec ESC + 17.5 = TRC 仕樣

2. LM Chassis 造 103GT + XJR14 shell (裝燈) or COLT = JV 仕樣

* can fit with 5000 50c SMC lipo

abcde hope to see u in JV later

作者: kamlo713 時間: 2011-1-5 23:08
回復 8# hk_sdu
眞係好心機

作者: abcde 時間: 2011-1-5 23:59

i think i blow too much water here, need to post some picture of my 103

1. F1 - stock spec ESC + ...
hk_sdu 發表於 2011-1-5 22:44

登錄/註冊後可看大圖

多謝分享....hope to see you too in JV....
我地玩hw 9t (4300kv) 多....大約有8.5t(4000kv)有senior 速度到
pro ten 朋友用lipo...我用a123...所以慢d...(但我巳用lipo mode 黎差 a123....電壓升dd啦

)
星期六早上玩多...但見有師兄星期日都有玩...可能我自己會玩多日

作者: bowielum 時間: 2011-1-6 00:45
恭喜恭喜，支持一雞多吃

作者: dl 時間: 2011-1-6 09:27
milk哥~!
我見到你有d TRG Parts係咩黎

作者: fyin 時間: 2011-1-6 09:46
擒晚出咗KWS同fan行街同買pro ten呔.
老鴻真好識搵$$$. 上星期我買1套前後都係$165.
今次要$185 多咗$20, 佢可能見到多人玩所以加價. 食硬你.

不過都平過玩tamiya F1 綿呔, tamiya F1 呔頭尾一套過$200

+ 向JV蝕得好快.

作者: milkboy 時間: 2011-1-6 10:25
回復 18# dl

^^~
TRG 5020 尾翼碼囉.....

作者: abcde 時間: 2011-1-6 10:54

擒晚出咗KWS同fan行街同買pro ten呔.
老鴻真好識搵$$$. 上星期我買1套前後都係$165.
今次要$185 多 ...
fyin 發表於 2011-1-6 09:46

登錄/註冊後可看大圖

不過pro ten 呔玩得耐d又大條d....而且揾到無咁去呔組合...$185 都好啦...
再講pro ten 戰鬥力同f103是有分別....

問下係唔係返左crc le 呀...乜價位....
1

作者: fyin 時間: 2011-1-6 11:00
本帖最後由 fyin 於 2011-1-6 11:03 編輯

cat shop $1580
另向X速買咗好盈9t35a 套裝ESC $488

作者: abcde 時間: 2011-1-6 11:01

不過pro ten 呔玩得耐d又大條d....而且揾到無咁去呔組合...$185 都好啦...
再講pro te ...
abcde 發表於 2011-1-6 10:54

登錄/註冊後可看大圖

睇翻舊post....原來有答案

$1580......very good

作者: nel3838 時間: 2011-1-6 11:37
C-Hing 们,

可不可以用F104Pro去改呢? 会太长吗?

和 F103GT hub, 可用 Pro 10 呔吗?

谢谢

作者: abcde 時間: 2011-1-6 11:55
回復 24# nel3838
1.http://bbs.rc-evo.com/viewthread ... &extra=page%3D1
2.NO...can't use...

作者: nel3838 時間: 2011-1-6 12:51

回復 nel3838
1.
2.NO...can't use...
abcde 發表於 2011-1-6 11:55

登錄/註冊後可看大圖

哇好玩wor, 多谢.

but, 可以用 Pro 10 Hub on F104 Pro 吗?

作者: abcde 時間: 2011-1-6 12:53
ans is no again....too different thing on pro ten and f103/f104 rear....

作者: hk_sdu 時間: 2011-1-6 14:08
回復 24# nel3838

F103GT hub = 1:10 touring hub, can using all toruing rubber and foam tires

Totally different animal with PRO10

作者: abcde 時間: 2011-1-6 14:15
是的...速度上.....豹(pro ten) 和馬(f103) 的分別....所以我正在班(馬)(多d人玩f103)去圍住d豹

作者: hknewton 時間: 2011-1-6 20:40

不過pro ten 呔玩得耐d又大條d....而且揾到無咁去呔組合...$185 都好啦...
再講pro te ...
abcde 發表於 2011-1-6 10:54

登錄/註冊後可看大圖

無咁去呔組合? 講d來聽吓啦

作者: abcde 時間: 2011-1-6 21:06
本帖最後由 abcde 於 2011-1-6 21:09 編輯

pro ten tire not much choice...not control for race should be more good to practice........

btw...you not play f103 ? want to buy 1/10 pan car

作者: hknewton 時間: 2011-1-6 21:29
i've 109. But the rear of my 109 is very drift. Not playable.
Somebody said Zen tire is good. But not sure durable or not.
And the running cost is , hahaha....
Now, looking for pro 10.

作者: abcde 時間: 2011-1-6 21:44
本帖最後由 abcde 於 2011-1-6 21:48 編輯

i've 109. But the rear of my 109 is very drift. Not playable.
Somebody said Zen tire is good. But n ...
hknewton 發表於 2011-1-6 21:29

登錄/註冊後可看大圖

i forgot f103 or f109 la....zen should be OK....
if pro 10...sure now CRC LE....$1580...tire $200.....body....$1XX....esc HW 9T $4XX.....

servo..$2xx.......

作者: fyin 時間: 2011-1-7 09:06
本帖最後由 fyin 於 2011-1-7 09:09 編輯

回復 33# abcde

Sell yr F109 and add $$ change to new pro ten.
Join us now.

LE in stock don't waiting too long la bro.

作者: abcde 時間: 2011-1-7 11:29
回復 34# fyin
ha ha....it need add a lot of $$$$$$$$$$ to buy la due to F109 new only $7xx...2nd hand i guest only $2xx or less la...

作者: fyin 時間: 2011-1-7 11:41
我架101都賣到3XX.
F109 應該都可以墳4xx, 你仲改咗104頭擔.

作者: nel3838 時間: 2011-1-7 15:14
师兄们,

那里买靓 Leman body 啊? KWS 没太多....

作者: milkboy 時間: 2011-1-7 18:51
回復 37# nel3838

RC Mart and other RC on-line stores.

^^~

作者: cHRisTiAN 時間: 2011-1-8 06:41
回復 32# hknewton
有無改用12仔side spring?可解決很多問題

作者: hknewton 時間: 2011-1-8 11:35
回復 39# cHRisTiAN

目的係要絛尾有咁軟得咁軟?

作者: cHRisTiAN 時間: 2011-1-8 12:19
回復 40# hknewton
相反~
原裝or option side spring.過軟,造成過多的扭動.
除非rolling damper用上10000度以上的牙差油.但我又覺得部車反應遲鈍.

所以改用12仔side spring較好.

依家我用緊CRC最硬,不論跑膠/綿呔,都無問題.

作者: dl 時間: 2011-1-8 20:47
christian c hing!請問要點改用12仔side spring呀?
有冇相睇下呀!!!

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://rc-evo.com/xbbs/)