RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: Sakura S - Diff gear damage [打印本頁]

作者: bigheman 時間: 2011-2-4 20:34
標題: Sakura S - Diff gear damage
Hi Chings

I have killed 2 diff in one week, the back and then front. (First diff gear from kit), is there anyway to make them last longer, such as adding shims in certain area in the diff?

I run a 2400VK motor with turbo mode.

Many thanks in advance.

Cheers

作者: b.woo 時間: 2011-2-4 20:36
Change them to metal gear. Only $160 for both.

作者: bigheman 時間: 2011-2-4 20:39
So Good, which shop and what brand? many thanks!

作者: b.woo 時間: 2011-2-4 21:12
回復 3# bigheman
金屬差速齒, $80 蚊包, go to the shop call 好景.
The metal gear, original use for the NT-1.

作者: kkchung 時間: 2011-2-4 21:40

So Good, which shop and what brand? many thanks!
bigheman 發表於 2011-2-4 20:39

登錄/註冊後可看大圖

車中樂、萬里..等等 KM Group HK-1 用金屬差速齒。約六十多元左右。

作者: bigheman 時間: 2011-2-4 21:47
Thanks so much for the advise!! :-)

作者: 天娜 時間: 2011-2-4 22:21

回復 bigheman
金屬差速齒, $80 蚊包, go to the shop call 好景.
The metal gear, original use for ...
b.woo 發表於 2011-2-4 21:12

登錄/註冊後可看大圖

Ha~.~ I bought 1 set at Hung X cost HKD12X for NT-1

作者: Evo5 時間: 2011-2-4 22:47
I am not suprise.......KWS sea food price ma

作者: bigheman 時間: 2011-2-11 21:30
Got it today, but after install, (and try many times), still find it is very tight, not so smooth, any tips to make it smooth?

Many thanks

Leo

作者: bigheman 時間: 2011-2-11 23:23
oh i find out that if you use HK1 metal diff gear, you need one 1 shim each side inside the diff, now is all smooth!!

As the thickness of the gears are different!

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://rc-evo.com/xbbs/)