RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: deleat [打印本頁]

作者: ford    時間: 2011-2-14 12:15
標題: deleat
本帖最後由 ford 於 2012-2-12 17:13 編輯

thanks  all

作者: hinwong    時間: 2011-2-14 15:22
我都想知...
作者: kkchung    時間: 2011-2-15 01:56
小弟的hobbywing 120a 加 teampower 10.5t 如用原裝
turbo mode 摩打齒是否用19t ok呢? thanks
ford 發表於 2011-2-14 12:15

hobbywing 120A 原裝出廠應是沒有 stock Turbo mode ,出廠時 Timing 在 15度、Punch 是 Level7 。
大場約 80/29T 細場約 80/26T。 80/19T 可能太幔,給約6.5T馬達用好些。
作者: seven    時間: 2011-2-15 01:57
hobbywing 120A 原出廠應是沒有 Turbo mode ,出廠時 Timing 在 15度、Punch 是 Level7 。
大場約 80/29 ...
kkchung 發表於 2011-2-15 01:56


V2.1出廠係咩software?
作者: ford    時間: 2011-2-15 02:06
hobbywing 120A 原裝出廠應是沒有 stock Turbo mode ,出廠時 Timing 在 15度、Punch 是 Level7 。
大場 ...
kkchung 發表於 2011-2-15 01:56



    是的,我已updated了turbo mode. 那10.5t在jv應用 80/26t? thanks kk
作者: bigheman    時間: 2011-2-15 10:46
Hi I have been using a 2400kv motor, is about a 13.5T rating in HW standard.

If 80/25 it will top out too early even with turbo is fully on (on 60 degree timing, which is the max allowed with HW software).  The motor is about 60-65C after a full battery run for 10mins.

Since your is a 10.5 turn, it will be slightly different.

Cheers
作者: yst    時間: 2011-2-15 12:33
I suggest 22T for 10.5 with turbo. Yet it depends on turbo level you set.




歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://rc-evo.com/xbbs/) Powered by Discuz! X3.2