RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: 那裏有做像真船木材買 [打印本頁]

作者: kawa5525    時間: 2011-3-5 21:27
標題: 那裏有做像真船木材買
各位師兄、請問旺角模型店買唔到模型木材、那處可買到、而且呎吋較齊、謝
作者: Delta.    時間: 2011-3-5 21:56
飛機木???
作者: wda    時間: 2011-3-5 22:40
你要那一種木材..蒙船底的木條.還是甲板的..一般蒙船皮是同桐本條..甲板用櫻桃木.柚木等等..船樓可以用白楊木.
作者: andygoody    時間: 2011-3-6 10:48
偉高, 雷達行有得賣, 雷達行好似多選擇一些
作者: kawa5525    時間: 2011-3-6 12:30
多謝師兄幫忙、誑
作者: kawa5525    時間: 2011-3-6 12:30
多謝師兄幫忙、謝
作者: wda    時間: 2011-3-6 17:25
不要錯買輕木..因為強度不足的..其實不一定要去模型店買木材..去旺角道那邊的木材行也可以買到合用的材料.而且比模型店便宜很多..
作者: Skipper    時間: 2011-3-6 22:16
Radar only have one kind of very thin plywood, I guess it is 1.6 mm (1/16") thick plywood, others are balsa, not suitable for model boat. The timber shop in Mong Kok have 1/8" plywood, for interior decoration use, the finish of the plywoods are very "rough".

I just wish to find some 1.6 mm (1/16") and 3.2 mm (1/8") plywood, with white/smooth surface on both sides in last week for my wooden boat, but failed.

If any C-Hing know where can find this, Please tell me also!
作者: andygoody    時間: 2011-3-7 10:09
Radar only have one kind of very thin plywood, I guess it is 1.6 mm (1/16") thick plywood, others ar ...
Skipper 發表於 2011-3-6 22:16



    There are lots of timber shops in Lockhart Road, Wanchai.  You may try
作者: Skipper    時間: 2011-3-7 18:47
There are lots of timber shops in Lockhart Road, Wanchai.  You may try
andygoody 發表於 2011-3-7 10:09



Sure will go to Lockhart Rd in this Friday/Saturday!   
Thanks you for your information.




歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://rc-evo.com/xbbs/) Powered by Discuz! X3.2