RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: F104W Pan Car LM - Classic Porsche 962 Shell [打印本頁]

作者: nel3838 時間: 2011-7-10 22:41
標題: F104W Pan Car LM - Classic Porsche 962 Shell
本帖最後由 nel3838 於 2011-9-2 09:30 編輯

Many thanks to JohnnyC C-Hing excellent body work. Here is a new toy to share (plus real pictures too ..

)
(ran well at JV tonight

)
[attach]513911[/attach]
[attach]513912[/attach]
[attach]513908[/attach]
[attach]513909[/attach]
[attach]513906[/attach]
[attach]513907[/attach]
[attach]513910[/attach]

Here are the real things:
[attach]513920[/attach]

[attach]513919[/attach]

作者: casyyeung 時間: 2011-7-10 22:47
Nice car

作者: IS520 時間: 2011-7-10 22:50
車殼上七粒螺絲有乜用？

作者: nel3838 時間: 2011-7-10 23:15
本帖最後由 nel3838 於 2011-7-10 23:18 編輯

IS520 發表於 2011-7-10 22:50

登錄/註冊後可看大圖

車殼上七粒螺絲有乜用？

Wahh CHing-sharp eyes wor...

The small screws are for "anti scratch", to protect the body.
(it is too nice maa..

)

作者: manhunt 時間: 2011-7-11 00:15
anti scratch

does it work?

作者: johnxxxjelly 時間: 2011-7-11 02:24
C Hing I saw your F1 tonight. Which tire did you use? My Gr.C keep spining when in full throttle at JV.

I used xceed medium at the front and soft at the rear.

作者: nel3838 時間: 2011-7-11 07:53

manhunt 發表於 2011-7-11 00:15

登錄/註冊後可看大圖

anti scratch
does it work?

Yes it does. Obviously not for big crashes. The screws are positioned at roll over touch points, and if the car rolls, because the screws stick out for 1-2mm, the body is slightly kept from the ground, so reduce the cutting into the lexan plastic by the ground. It's just a small but extra protection.

(and I guess it looks cool on top of window too....

)

作者: nel3838 時間: 2011-7-11 07:58
I used Zen front and back. I tried exceed too, use hard front, and soft or medium back, and only tyre water at back. However, zen combination is much bette.

作者: johnxxxjelly 時間: 2011-7-11 11:50
Thanks. Will try zen front (hard) rear (soft) next time.

They got sponge tyre for sell only? Coz I want to use the original rim for the Gr. C.

作者: johnxxxjelly 時間: 2011-7-11 11:51
Thanks. Will try zen front (hard) rear (soft) next time.

They got sponge tyre for sell only? Coz I want to use the original rim for the Gr. C.

作者: kevin-ysl 時間: 2011-7-11 12:04
靚爆鏡~~~
一定要配D靚車鈴先夠高貴!!

作者: bigheman 時間: 2011-9-1 15:29

nel3838 發表於 2011-7-10 22:41

登錄/註冊後可看大圖

Many thanks to JohnnyC C-Hing excellent body work. Here is a new toy to share (plus real pictures t ...

Ching , it is beautiful

Is that shell made by ABC ? Thanks

作者: tiger1 時間: 2011-9-1 21:16
very pretty ar c-hing, I love this one!!

作者: nel3838 時間: 2011-9-1 22:00
多謝帥兄門，及jonnyC 帥兄大作。

作者: tiger1 時間: 2011-9-2 06:42
how come there are 6 small silver screws on the top of the body shell??

作者: nel3838 時間: 2011-9-2 07:25

tiger1 發表於 2011-9-2 06:42

登錄/註冊後可看大圖

how come there are 6 small silver screws on the top of the body shell??

Small screws for protecting body, at touch points, from scratches when the car flips over.

作者: terrykan 時間: 2011-9-2 08:44
嘩！好正！我都好想做一個！

作者: tiger1 時間: 2011-9-2 09:24

nel3838 發表於 2011-9-2 07:25

登錄/註冊後可看大圖

Small screws for protecting body, at touch points, from scratches when the car flips over.

even with the screws, still 'ho lan'

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://rc-evo.com/xbbs/)