RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: sidecar [打印本頁]

作者: slowerthanyou 時間: 2012-2-3 14:31
標題: sidecar
本帖最後由 slowerthanyou 於 2012-3-14 12:19 編輯

early Xmas pressie

wanted for so long. finally found a kit.

作者: chiu 時間: 2012-2-3 14:47
本帖最後由 chiu 於 2012-2-3 14:57 編輯

slowerthanyou 發表於 2012-2-3 14:31

登錄/註冊後可看大圖

early Xmas pressie wanted for so long. finally found a kit.

sidecar1.jpg

Nice wor.........

Mardave Racing V12 FIM Sidecar from England

作者: RGear 時間: 2012-2-3 14:53
Look forward to the building blog

作者: slowerthanyou 時間: 2012-2-3 15:15

RGear 發表於 2012-2-3 14:53

登錄/註冊後可看大圖

Look forward to the building blog

I think your neck will be very long!

作者: slowerthanyou 時間: 2012-2-3 15:24

chiu 發表於 2012-2-3 14:47

登錄/註冊後可看大圖

Nice wor.........

Mardave Racing V12 FIM Sidecar from England

yes thx.

there's another one at1 by Allgaeutech that's even nicer looking but too much bucks. I wonder if anyone in bbs has it.

作者: RGear 時間: 2012-2-3 15:31
Is it possible to only buy the body shell ?

作者: RGear 時間: 2012-2-3 15:39
點解有4個輪 ?

作者: slowerthanyou 時間: 2012-2-3 16:07
本帖最後由 slowerthanyou 於 2012-2-3 16:15 編輯

RGear 發表於 2012-2-3 15:39

登錄/註冊後可看大圖

點解有4個輪 ?

There should be only three.

Edit: that should be three on three axes, but roughly two on the right and one on far left

作者: slowerthanyou 時間: 2012-2-7 14:32

RGear 發表於 2012-2-3 14:53

登錄/註冊後可看大圖

Look forward to the building blog

Progress so far = 很慢, parts + fit o查爆. Manual 超唔店. 因圖片和文字有時不吻合, 要用一點想像力. 冇計舊產品, 給 double star寵壞了. 如 bell crank同 ball joint/ball end安裝後完全唔郁得. 暴力都無用. 最後屈服換用了其他牌子dee joint. Bell crank代替品現在尋找中. 還有Bell crank 軟到我想唔使用servo saver (lol). 結論: 很奇怪地.切得好開心.

作者: RGear 時間: 2012-2-7 14:50
回復 slowerthanyou 的帖子

Photo photo photo

作者: 0433351410 時間: 2012-2-7 23:33
Nice car wo
could u tell me where to buy ar
Thanks Ching

作者: slowerthanyou 時間: 2012-2-8 08:59

0433351410 發表於 2012-2-7 23:33

登錄/註冊後可看大圖

Nice car wo
could u tell me where to buy ar
Thanks Ching

pls check pm

作者: minimini 時間: 2012-2-8 14:36
1:1 sidecar 比賽....精彩......

http://www.youtube.com/watch?v=a89tR8jGmDE

作者: tiger1 時間: 2012-2-8 21:02
agree, very exciting in 1:1

作者: slowerthanyou 時間: 2012-2-8 22:30
thx for sharing. the passengers are absolute nutters (in a good way)!

作者: slowerthanyou 時間: 2012-2-8 22:42
minimini c-hing. pls check pm.

作者: slowerthanyou 時間: 2012-2-9 10:55
mostly finished. just electrics.

5. tight ball ends even after cutting.

6. funny squint motor mount. one side not in-line with chassis. to counter effect of one wheel drive?

7. completed mount.

8. finished...kinda

作者: fyin 時間: 2012-2-9 11:32
Hi Ching, 塊底板幾厚呀?

作者: python 時間: 2012-3-1 00:02
Super love this sidecar, where can buy it? CHing

作者: Senner 時間: 2012-3-1 00:29
回復 slowerthanyou 的帖子

Just ordered 3 sets of Side Car Kits and spare parts from England. Looking forward to form a side car racing team in HK....

作者: min 時間: 2012-3-1 00:37
Ching架車是否直出的(看相不見有叉速)?

作者: slowerthanyou 時間: 2012-3-1 09:27
回復 Senner 的帖子

作者: slowerthanyou 時間: 2012-3-1 09:30
回復 min 的帖子

you are correct, straight drive, no diff.

作者: RGear 時間: 2012-3-1 09:58
Want to use 1/12 part, and some soft-drink bottle to make these car...

作者: slowerthanyou 時間: 2012-3-1 10:21
check that last one with the swinger all leaned out but still airborne!

hats off to these nutters (in a good way)!

作者: Senner 時間: 2012-3-12 21:46
回復 slowerthanyou 的帖子

[attach]599310[/attach][attach]599309[/attach]

Just received the Side Cars Kits and spare parts today.

作者: slowerthanyou 時間: 2012-3-12 22:06

Senner 發表於 2012-3-12 21:46

登錄/註冊後可看大圖

回復 slowerthanyou 的帖子

happy building! yours will probably beat mine to the race track!

作者: slowerthanyou 時間: 2012-3-13 14:44
本帖最後由 slowerthanyou 於 2012-3-22 22:21 編輯

shell update. took ages but still lots of bleed through. teach me to forget fingernailing the masking tapes before spray bombing with the rattle can.
[attach]602696[/attach]

[attach]602695[/attach]

作者: longman0072 時間: 2012-3-13 14:50
oh.........impressive.......

作者: slowerthanyou 時間: 2012-3-13 14:52
回復 longman0072 的帖子

thx.

作者: RGear 時間: 2012-3-13 14:54
Hand paint the flowers ?

作者: slowerthanyou 時間: 2012-3-13 14:55
本帖最後由 slowerthanyou 於 2012-3-13 14:56 編輯

回復 RGear 的帖子

no la. masked. you can just see in the 2 mask photos. I don't have the pots of PS paint nor faskolor.

作者: kevin-ysl 時間: 2012-3-13 15:00
呢個殼都幾惡搞喎!!!
d位冇細節嘅!!

作者: tiger1 時間: 2012-3-13 15:03

min 發表於 2012-3-1 00:37

登錄/註冊後可看大圖

Ching架車是否直出的(看相不見有叉速)?

1WD 唔使差速

作者: tiger1 時間: 2012-3-13 15:15
殼上面兩條友都真係 mold 得好精簡下

作者: chacha 時間: 2012-3-13 15:35

slowerthanyou 發表於 2012-3-13 14:44

登錄/註冊後可看大圖

shell update. took ages but still lots of bleed through. teach me to forget fingernailing the maski ...

嘩，靚仔到呢

作者: tiger1 時間: 2012-3-13 15:35
不過菊花車花好正

作者: slowerthanyou 時間: 2012-3-13 16:03
回復 chacha 的帖子

thx.

作者: slowerthanyou 時間: 2012-3-13 16:05
本帖最後由 slowerthanyou 於 2012-3-13 16:37 編輯

回復 tiger1 的帖子

thx for the compliment. and it's sakura not chrysanthemum

作者: tiger1 時間: 2012-3-13 16:44
咪住，櫻花喎，我以為菊花，可能嗰時諗咗衰嘢

作者: fuckedfung 時間: 2012-3-13 17:37
How much? Where to buy? Thx

作者: corkscrew 時間: 2012-3-13 17:52

tiger1 發表於 2012-3-13 15:35

登錄/註冊後可看大圖

不過菊花車花好正

師兄, 好似係櫻花黎喎~~

作者: corkscrew 時間: 2012-3-13 17:52

tiger1 發表於 2012-3-13 16:44

登錄/註冊後可看大圖

咪住，櫻花喎，我以為菊花，可能嗰時諗咗衰嘢

你心邪喇~~

作者: corkscrew 時間: 2012-3-13 17:54
小弟睇到3月RC WORLD既一頁廣告先知有呢架車....

作者: tiger1 時間: 2012-3-13 21:31

corkscrew 發表於 2012-3-13 17:52

登錄/註冊後可看大圖

你心邪喇~~

我冇邪，係衰

八

作者: tiger1 時間: 2012-3-13 21:32
哈哈哈

作者: minimini 時間: 2012-3-13 21:54

tiger1 發表於 2012-3-13 15:15

登錄/註冊後可看大圖

殼上面兩條友都真係 mold 得好精簡下

佢哋戴哂黑超.........咁咪セ春都睇唔到 ??........

作者: slowerthanyou 時間: 2012-3-13 22:06
回復 minimini 的帖子

ray bans should be ok la ma.

作者: tiger1 時間: 2012-3-13 22:06

minimini 發表於 2012-3-13 21:54

登錄/註冊後可看大圖

佢哋戴哂黑超.........咁咪セ春都睇唔到 ??........

good point

作者: minimini 時間: 2012-3-13 22:54
個助手如果加埋條 T-back.......肯定收視爆燈.......

作者: slowerthanyou 時間: 2012-3-13 23:03
回復 minimini 的帖子

you know, after looking at the pics again. it looks like they each have a black bra on their face!

作者: minimini 時間: 2012-3-13 23:07

slowerthanyou 發表於 2012-3-13 23:03

登錄/註冊後可看大圖

回復 minimini 的帖子

再加個淫笑嘅咀就更絕........

作者: min 時間: 2012-3-14 00:40
回復 tiger1 的帖子

麻煩Ching

，我想老Copy一架抄襲星星版本，用F1波箱改做的.

作者: tiger1 時間: 2012-3-14 07:07

minimini 發表於 2012-3-13 22:54

登錄/註冊後可看大圖

個助手如果加埋條 T-back.......肯定收視爆燈.......

t-back 再 + 淫笑咀........

作者: tiger1 時間: 2012-3-14 07:07

min 發表於 2012-3-14 00:40

登錄/註冊後可看大圖

回復 tiger1 的帖子

麻煩Ching，我想老Copy一架抄襲星星版本，用F1波箱改做的.

no 麻煩

作者: slowerthanyou 時間: 2012-3-15 03:13

fuckedfung 發表於 2012-3-13 17:37

登錄/註冊後可看大圖

How much? Where to buy? Thx

pls chk pm

作者: Senner 時間: 2012-3-15 23:56
回復 slowerthanyou 的帖子

Dear Ching, what motor you planing to use ? will you use the motor came with the kit ? I would like to try brushless but not sure what turn is better.

作者: slowerthanyou 時間: 2012-3-16 01:06

Senner 發表於 2012-3-15 23:56

登錄/註冊後可看大圖

回復 slowerthanyou 的帖子

Dear Ching, what motor you planing to use ? will you use the motor came ...

c-hing, I have no idea. what's a white pig equivalent, 17.5? Try it out and go from there I guess. Did you buy different spur sizes also? how's your build coming along?

作者: tiger1 時間: 2012-3-16 07:03
i would choose white pig

作者: Senner 時間: 2012-3-16 13:32
回復 slowerthanyou 的帖子

Same question I have asked the shop supplier in England and got their reply as below :

"Glad you like your sidecars.
The speed control that comes with the kit will only cope with motors down to 23t like the one supplied.
In our experience it is counter productive to put faster motors in the sidecars. They are hard enough to control as standard.
Brushless motor and speeed controller would be ok but only MILD, equivalent to 22t.
Best Regards
Chris
Formby Models"

作者: slowerthanyou 時間: 2012-3-16 15:15

Senner 發表於 2012-3-16 13:32

登錄/註冊後可看大圖

回復 slowerthanyou 的帖子

Same question I have asked the shop supplier in England and got their rep ...

thx for the info. I was going to be cheap and just use one of my existing bl and use the limiter on my tx to calm it down a bit. Maybe you can try that also before getting another bl. Unless you have a 22t already of course.

作者: Senner 時間: 2012-3-17 00:30
回復 slowerthanyou 的帖子

Hi slower,
What battery you using in Side car ? I plan to test run in JV once finished assembly.

作者: slowerthanyou 時間: 2012-3-17 01:11
本帖最後由 slowerthanyou 於 2012-3-22 13:28 編輯

回復 Senner 的帖子

I have a couple packs of IP 1.9K mAH that seem to be able to fit into the original batter tub. So will probably use those. You?

[attach]602555[/attach]

[attach]602550[/attach]

No idea when I will be able to play though. Looking forward to your test report!

addendum: found this regarding what motor to use. Seems like not much difference what you use, lap time will be about the same.

作者: Senner 時間: 2012-3-22 13:52
回復 slowerthanyou 的帖子

[attach]602558[/attach]
Yes ! this is good idea to use this size for battery, I'm using the same. By the way have you installed the above optional item V2BR Ball Race Converter ? as the kit came without bearings for the front and side wheels.

作者: slowerthanyou 時間: 2012-3-22 14:12

Senner 發表於 2012-3-22 13:52

登錄/註冊後可看大圖

回復 slowerthanyou 的帖子

Yes. I've installed it. Do your kits have the "antenna" holder thing? Mine seems to be missing. Unless it's an option. Lame if it is. Also just found that Mardave's site is up and running where it was not before. Interesting to note that the sidecar has taken off in Japan too. They mentioned that there are at least 80 chassis there now.

作者: RGear 時間: 2012-3-22 14:22
Look forward to the side car run at JV !!

作者: corkscrew 時間: 2012-3-22 17:43

tiger1 發表於 2012-3-16 07:03

登錄/註冊後可看大圖

i would choose white pig

應該380摩打都OK喎~

作者: tiger1 時間: 2012-3-22 17:53
Still want a 540 class motor, need to be a little overpowered to feel the 'fun' factor

作者: ford 時間: 2012-3-22 22:40
有趣的東西,比孖星更像真

作者: Senner 時間: 2012-3-23 00:32
回復 slowerthanyou 的帖子

The antenna, I will check it. Yes, my Japanese friend said that the Side Car is become popular in Japan.

作者: tiger1 時間: 2012-3-24 23:52
there is a lot of potential in this type of side car, imagine get another channel and add a servo to move some weight around in action

作者: Scania 時間: 2012-3-25 13:50
頭擔個方向同真車掉轉既？

作者: tiger1 時間: 2012-3-26 16:33
2012 April issue #196 日本 RCWorld 封面就係呢架東西！

作者: RGear 時間: 2012-3-27 15:39
What is the diameter of the 3 different wheels ?

作者: slowerthanyou 時間: 2012-3-27 22:35

RGear 發表於 2012-3-27 15:39

登錄/註冊後可看大圖

What is the diameter of the 3 different wheels ?

copied from the instruction setup advice:

front: 50 shore tyre @ 47mm
side: V54P pink med @ 50mm
rear: V54s pink soft @ 52mm

作者: slowerthanyou 時間: 2012-3-27 23:47
真低B, foamtyre黐得很樣哀, 但已經覺得自己好勁.

[attach]604868[/attach]

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://rc-evo.com/xbbs/)