RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: 老爺車入月野倉 [打印本頁]

作者: PKKC    時間: 2012-5-12 02:14
標題: 老爺車入月野倉
現在有個咁正的越野塲,真想整返好架老爺車入倉玩。
作者: emaxxyeung    時間: 2012-5-12 08:32
PKKC 發表於 2012-5-12 02:14
現在有個咁正的越野塲,真想整返好架老爺車入倉玩。

師兄,更係要呀
作者: zeda    時間: 2012-5-12 08:44
what vintage car
作者: RCandylau    時間: 2012-5-12 09:36
what老爺車
作者: lawrencewong    時間: 2012-5-12 11:33
What 老爺車? 月野倉 is low-medium traction track if you take 1/10 2WD buggy. Especially the track break up after oil chicken running.
作者: lawrencewong    時間: 2012-5-12 11:40
continued.. If you take 1/10 2wd buggy, it is difficult to drive and jump. The car must be set up very well to increase grip.  
作者: ikesan    時間: 2012-5-12 12:04
回復 PKKC 的帖子

你吾係有部金兜RC10咩?
作者: PKKC    時間: 2012-5-12 13:27
回復 ikesan 的帖子

改了黑兜stealth. 現在正忙於改前後呔做2.2 to fit for modern wheel. Busy busy....我正想帶此車入倉
作者: hihizaza    時間: 2012-5-12 13:37
我有架車底幾花既optima,可能入去遊車河!
作者: tunagt    時間: 2012-5-12 14:17
遊車河......X2
作者: PKKC    時間: 2012-5-13 01:24
今日整好前後新呔呤,跟住落心臓,噴殻。希望下星期入去遊花園。

作者: oscarchoi    時間: 2012-5-13 01:48
等禾拿這架玩
[attach]621598[/attach]

作者: tiger1    時間: 2012-5-13 07:11
PKKC 發表於 2012-5-13 01:24
今日整好前後新呔呤,跟住落心臓,噴殻。希望下星期入去遊花園。

very nice rc10
作者: PKKC    時間: 2012-5-20 01:14
Finally is done
作者: PKKC    時間: 2012-5-22 19:31
本帖最後由 PKKC 於 2012-5-22 20:09 編輯

Can this car use b4 gear cover? i have one but afraid to put on as i can only tighten 1 screw out of 2 in total。would the dirt go in if i only tighten the one on the top? thanks
作者: BUNNYYUEN    時間: 2012-5-22 19:45
佢系話要摷番本"老爺車"什誌入月野倉到睇呀!哈!
作者: lawrencewong    時間: 2012-5-23 17:36
回復 PKKC 的帖子

I see rc10talk.com.  State that it need to drill the other one on the motor plate in order to use B4 gear cover.




歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://rc-evo.com/xbbs/) Powered by Discuz! X3.2