RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: YZ834B with modifications [打印本頁]

作者: tiger1 時間: 2012-7-15 19:37
標題: YZ834B with modifications
Here are some older photos of my YZ834B

作者: rcworldhk 時間: 2012-7-15 19:42

tiger1 發表於 2012-7-15 19:37

登錄/註冊後可看大圖

Here are some older photos of my YZ834B

Nice car

作者: @kin888289 時間: 2012-7-15 19:44

gooooood car.

作者: cwc86659 時間: 2012-7-15 19:48
少年時我都曾經擁有過

作者: cfchung 時間: 2012-7-15 19:54
個車花好青見wor!

作者: ryancmlam 時間: 2012-7-15 20:07
like like

作者: emaxxyeung 時間: 2012-7-15 21:49
十個Good

作者: tiger1 時間: 2012-7-15 22:17
thanks for all the kind words

作者: mcb 時間: 2012-7-16 08:53
Nice car

作者: polarbear 時間: 2012-7-16 12:52
Hay, you have the Square type yokomo 05 on your car wow

作者: tiger1 時間: 2012-7-16 14:02
本帖最後由 tiger1 於 2012-7-16 14:03 編輯

師兄連個05RS turbo 都睇到，果然係高手中之高手。好眼力。

作者: tiger1 時間: 2012-7-16 14:04
我從前放05 RS twincam 落我部 bulldog

作者: Buzzcow 時間: 2012-7-16 22:26
回復 tiger1 的帖子

So nice! any inside photos?

作者: RC881 時間: 2012-7-16 22:42
經典好車

作者: tiger1 時間: 2012-7-16 23:19

Buzzcow 發表於 2012-7-16 22:26

登錄/註冊後可看大圖

回復 tiger1 的帖子

So nice! any inside photos?

Inside photos?? Now I am in the middle of doing another upgrade, inside photos will look like crap. When I am done with the upgrade then I will show some naked pictures

作者: kingsleo 時間: 2012-7-17 02:40
can see the inside ....

作者: tiger1 時間: 2012-7-17 06:20

cfchung c-hing, I do not think anyone here want to see my naked photo

But I promise I will shoe the inside after I am done with the upgrade

作者: emaxxyeung 時間: 2012-7-18 13:26
Great item.great stuff.great project.great. graeat
Upgrade to whuch version?

作者: tiger1 時間: 2012-7-18 15:25
本帖最後由 tiger1 於 2012-7-18 15:46 編輯

I am not upgrading this to any particular 834b version. However, the original design was very very advance for its time.

The linked rear suspension and the front 1 shock suspension was plaqued by wrong choice of material in its execution. Simply, the plastic used was far too soft for its purpose.

The assumption for such design is that, apart from the moving parts, the system and the material itself are absolutely rigid. In order for the 834B suspension to work properly, it is crucial to upgrade material in the direction of gaining maximum rigidity but at the same time maintain super smooth movements. Also, using one shock each at the front and back require a proper set of antiroll bars.

In addition, no matter what is the assumption, monoshock design is not for off-road, it is more for rough surface on-road. The idea of big rim + thin tires, which the rims+tires flex little, but require more sophisticated suspension geometry, would not be a good idea for this car.

For 834B, IMHO, require thicker tires and use the consistency of the tires as a suspension 'adjustment', sort of like in the old days people use various softness of sponge tires to tune those none suspension pan cars.

作者: emaxxyeung 時間: 2012-7-18 20:45
Great "Super 834B"project

作者: tiger1 時間: 2012-7-18 21:06
老友，唔係乜嘢 super project, 係 super OLD project 就真。

作者: chris_mtx 時間: 2012-7-19 23:25
好正型嘅 YOK 834B！

作者: oasis 時間: 2012-7-20 11:45
回復 tiger1 的帖子

童夢呀!

作者: clivewong 時間: 2012-7-20 13:24
V Good!

作者: wahli 時間: 2012-7-21 08:54

經典好車

作者: rodmanwing 時間: 2012-7-21 10:27
So good!!!!

作者: tiger1 時間: 2013-8-6 21:47
本帖最後由 tiger1 於 2013-8-6 21:48 編輯

Some more modification

作者: tiger1 時間: 2013-8-6 21:49
本帖最後由 tiger1 於 2013-8-7 10:09 編輯

battery tray, new modification

I made this modification because someone offered good $$ for the yellow tray and I could not resist the $$$

The second photo showed cut short 3mm screw. The battery tray is mounted on 5mm thick M3 nuts, so I cut 8 pieces of 3mm screws down to 2.5mm thread height, then screws 'bite' into the 5mm think M3 nut from top and bottom engages 2.5mm each. Rock solid!

作者: tiger1 時間: 2013-8-6 21:59
Now it looks like this naked

作者: ardee123 時間: 2013-8-7 00:24
good*^_^*

作者: v8yw2 時間: 2013-8-7 00:33
好正

作者: minimini 時間: 2013-8-7 01:15
好 L 正.......

作者: tiger1 時間: 2013-8-7 10:38
些賒之齒。mini 哥可以唔好咁X興奮

作者: rk2 時間: 2013-8-8 08:53
nice old buggy

作者: emaxxyeung 時間: 2013-8-8 12:02
好 Q 正

作者: botaebi 時間: 2014-2-10 21:14
本帖最後由 botaebi 於 2014-2-10 21:44 編輯

一代經典,如果有"Hot Trick"版就更加不得了!

作者: chanyh13071 時間: 2014-2-10 21:30
好勁!

作者: tiger1 時間: 2014-2-11 07:37

chanyh13071 發表於 2014-2-10 21:30
好勁!

Thank you

作者: tiger1 時間: 2015-7-4 15:02
Graphite and Touring car mid shock

作者: Buzzcow 時間: 2015-7-4 15:06

tiger1 發表於 2015-7-4 15:02
Graphite and Touring car mid shock

Awesome modification!

作者: LAZER-ZXR_GP 時間: 2015-8-3 10:08
GOOD

作者: parrot 時間: 2015-8-16 15:50
Very good!

作者: tiger1 時間: 2015-8-16 17:33
some more work done

作者: tiger1 時間: 2015-8-16 17:41
More work done, 後炭化波箱碼。請指教

作者: tiger1 時間: 2015-8-16 17:53
More photo as of today

作者: paulaner 時間: 2015-8-17 01:19
巧L正!

作者: 師傅東 時間: 2015-8-26 21:02
Tiger兄，good job!

作者: tiger1 時間: 2015-8-27 07:06

師傅東發表於 2015-8-26 21:02
Tiger兄，good job!

Thanks C-hing

作者: tiger1 時間: 2016-2-12 15:23
時間過得好快，啲 idea 又出現。咁就多得兄弟幫忙，現在有了一塊新板... 特登多咗D窿喎

作者: hkBuggyboy 時間: 2016-2-12 15:32
NICE X 100

作者: tiger1 時間: 2016-2-13 23:03
身痕又再改D

作者: tiger1 時間: 2016-2-13 23:03
近鏡一映

作者: lcpvcce 時間: 2016-2-13 23:06
Wor..................

作者: tiger1 時間: 2016-2-13 23:10
C-hing you just had a heart attack??

作者: tiger1 時間: 2016-3-4 17:16
Completion

作者: spoonbb6 時間: 2016-9-20 18:02
OMG..... this is so nice!!

how does it run compare to the original version? any video?

作者: tiger1 時間: 2016-9-20 18:21
How it runs? No idea wor, haven't run it yet ;) hard to tell anyways as I don't race my cars

作者: kmart 時間: 2016-10-6 17:46
Absolutely speechless looking at your masterpiece!!!

作者: fyin 時間: 2016-10-7 13:45
Very Cool !

作者: missingdorami 時間: 2016-10-26 14:08
連我呢啲cd rom都要比個like你，正！

作者: tiger1 時間: 2016-10-27 07:05

missingdorami 發表於 2016-10-26 14:08
連我呢啲cd rom都要比個like你，正！

C-hing: Thanks for your kind words

作者: tiger1 時間: 2018-1-18 12:24
有師兄出CNC 波箱，咁我又改D囉

作者: tiger1 時間: 2018-1-18 19:38
New gearbox done up ;)

作者: tiger1 時間: 2018-1-18 19:39
前方亦加了一推桿，減少前臂移動

作者: tiger1 時間: 2018-1-24 08:30
New gearbox and new rear suspension geometry ;)

作者: LAZER-ZXR_GP 時間: 2018-1-27 17:37
努力!加油!

作者: tiger1 時間: 2018-1-27 18:32

LAZER-ZXR_GP 發表於 2018-1-27 17:37
努力!加油!

自當全力衝刺

作者: tiger1 時間: 2018-1-27 22:25
新車殼 Dahm 廠

作者: tiger1 時間: 2018-1-27 22:25
正面

作者: tiger1 時間: 2018-1-27 22:26
左右兩側睇下先

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://rc-evo.com/xbbs/)