RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: 玩大富翁 (monopoly) [打印本頁]

作者: jpmontoya2    時間: 2007-2-13 01:18
標題: 玩大富翁 (monopoly)
近期有朋友愛上了大富翁這玩意.....

我亦在他魔鬼下開始玩了

玩了幾個round後....粒"骰"叫我去廣華街......去到看見KWS有幾間魔鬼酒店.....唉..不幸地踩了最貴既一格.....賠了一大畢!!!!!

給錢地主時......心痛極了

作者: 清清    時間: 2007-2-13 01:19
原帖由 jpmontoya2 於 2007-2-13 01:18 發表
近期有朋友愛上了大富翁這玩意.....

我亦在他魔鬼下開始玩了

玩了幾個round後....粒"骰"叫我去廣華街......去到看見KWS有幾間魔鬼酒店.....唉..不幸地踩了最貴既一格.....賠了一大畢!!!!!
給錢地主時......心痛極了

你形容得好好笑
作者: cad    時間: 2007-2-13 02:18
$3000  走吾走到....
作者: kaho0338    時間: 2007-2-13 02:22
原帖由 cad 於 2007-2-13 02:18 發表
$3000  走吾走到....


何止
作者: jpmontoya2    時間: 2007-2-13 10:21
原帖由 cad 於 2007-2-13 02:18 發表
$3000  走吾走到....


No...cannot~
作者: buggy    時間: 2007-2-13 13:17
[quote]原帖由 jpmontoya2 於 2007-2-13 10:21 發表


No...cannot~ [/quote

你間酒店起得好靚。

價岩比晒我,5420hkd??

記主買埋2mm蕉插來做balancing。我發覺2s 都有成0.3 - 0.5V difference
請報告一下bc8好用嗎?

[ 本帖最後由 buggy 於 2007-2-13 13:22 編輯 ]
作者: lkfandy    時間: 2007-2-13 13:56
原帖由 buggy 於 2007-2-13 13:17 發表
原帖由 jpmontoya2 於 2007-2-13 10:21 發表


No...cannot~ [/quote

你間酒店起得好靚。

價岩比晒我,5420hkd??

記主買埋2mm蕉插來做balancing。我發覺2s 都有成0.3 - 0.5V difference
請報告一 ...

How to do balancing ?
作者: jpmontoya2    時間: 2007-2-13 14:13
原帖由 buggy 於 2007-2-13 13:17 發表
原帖由 jpmontoya2 於 2007-2-13 10:21 發表


No...cannot~ [/quote

你間酒店起得好靚。

價岩比晒我,5420hkd??

記主買埋2mm蕉插來做balancing。我發覺2s 都有成0.3 - 0.5V difference
請報告一 ...



I will open these boxes tonite....and WIll try read the manual tonite as well..hehe

作者: AMAT    時間: 2007-2-13 14:18
大富翁......我就做唔起
作者: jpmontoya2    時間: 2007-2-13 14:29
原帖由 AMAT 於 2007-2-13 14:18 發表
大富翁......我就做唔起


YOU CAN!!!!!
作者: orange00    時間: 2007-2-13 14:46
原帖由 buggy 於 2007-2-13 13:17 發表
原帖由 jpmontoya2 於 2007-2-13 10:21 發表


No...cannot~ [/quote

你間酒店起得好靚。

價岩比晒我,5420hkd??

記主買埋2mm蕉插來做balancing。我發覺2s 都有成0.3 - 0.5V difference
請報告一 ...


I think it doesn't really matter of price, relative for long term performance of NimH battery (whatever brand). I may consider it's cheap.
And for BC-8, with such specification of charger. I think the battery soon will go for another generation (not include racing).
Now even a BC-6, but don't know why not selling in Hong Kong.

[ 本帖最後由 orange00 於 2007-2-13 14:48 編輯 ]
作者: acdebby    時間: 2007-2-13 17:51

                               
登錄/註冊後可看大圖

部叉機機幾$?

差到咩電?

thx!!~~
作者: AMAT    時間: 2007-2-13 17:55
原帖由 acdebby 於 2007-2-13 17:51 發表
http://bbs.rc-evo.com/attachment.php?aid=67474
部叉機機幾$?

差到咩電?

thx!!~~


差LIPO.

都可以差呢個NIMH,聽聞話幾百蚊喎......
作者: Han    時間: 2007-2-13 18:11
大约$1500
作者: HF3648    時間: 2007-2-13 18:43
D電用黎玩咩?
作者: orange00    時間: 2007-2-13 22:52
原帖由 HF3648 於 2007-2-13 18:43 發表
D電用黎玩咩?


相信係 RC.  (講笑, 唔好介意 )
作者: jpmontoya2    時間: 2007-2-13 23:18
SO this is how everything looks when i hook it up with my laptop!~



it has a CD for live telemetry!!!

作者: jpmontoya2    時間: 2007-2-13 23:20
原帖由 acdebby 於 2007-2-13 17:51 發表
http://bbs.rc-evo.com/attachment.php?aid=67474
部叉機機幾$?

差到咩電?

thx!!~~


It can charge the following:

Lilo / LiPo/  LiFe / NiMH / NiCd / Pb

THe price is $17XX
作者: Han    時間: 2007-2-13 23:46
$17xx 咁14/F平d囉!
作者: jpmontoya2    時間: 2007-2-13 23:57
原帖由 Han 於 2007-2-13 23:46 發表
$17xx 咁14/F平d囉!


Thanks~~~

But i already bought it...so...haha

Here is the lovely carbon look of my 103GT

作者: buggy    時間: 2007-2-14 00:43
i want to buy BC8 too, but i really hate the printed wording on the shell. I saw some chargers on r/c shops windows that are not properly printed...
作者: jpmontoya2    時間: 2007-2-14 00:49
原帖由 buggy 於 2007-2-14 00:43 發表
i want to buy BC8 too, but i really hate the printed wording on the shell. I saw some chargers on r/c shops windows that are not properly printed...


Yes, those are copycat product...i tihnk they can only charge NiMH and NiCd
作者: kaho0338    時間: 2007-2-14 01:22
原帖由 jpmontoya2 於 2007-2-14 00:49 發表


Yes, those are copycat product...i tihnk they can only charge NiMH and NiCd


as i know K & S, Xpower and RCpower is the same as e-station, they are OEM product.
also e-station is copy from K & S.

i only know this 4 brand are the same machines

[ 本帖最後由 kaho0338 於 2007-2-14 01:24 編輯 ]
作者: orange00    時間: 2007-2-14 10:20
原帖由 kaho0338 於 2007-2-14 01:22 發表


as i know K & S, Xpower and RCpower is the same as e-station, they are OEM product.
also e-station is copy from K & S.

i only know this 4 brand are the same machines

Oh really, interesting. Will be great if u can provide more information. Any link of the brand name you specify?

By the way, what is OEM stand for?
作者: kawada    時間: 2007-2-14 11:04
原帖由 orange00 於 2007-2-14 10:20 發表

Oh really, interesting. Will be great if u can provide more information. Any link of the brand name you specify?

By the way, what is OEM stand for?

Br Orange,

It stand for " original equipment manufacturer " like Yokomo V2 is OEM by Durtex - ICE etc etc .. Furthermore,  Estation is now believed to be manuf by Great China ( 1st batch was made in Korea ) which quality wise ... mmmmmm ...  pls check its origin carefully...

[ 本帖最後由 kawada 於 2007-2-14 11:14 編輯 ]
作者: cad    時間: 2007-2-14 11:05
原帖由 orange00 於 2007-2-14 10:20 發表

Oh really, interesting. Will be great if u can provide more information. Any link of the brand name you specify?

By the way, what is OEM stand for?




you must see......

http://bbs.5imx.com/bbs/viewthread.php?tid=150431&highlight=RC-POWER

http://bbs.5imx.com/bbs/viewthread.php?tid=137807&highlight=RC-POWER

http://bbs.rc-evo.com/viewthread.php?tid=32325&highlight=

不過睇大陸的論壇講部機的QC有問題可能係一廠多OEM,吾同價吾同QC....
作者: SunLi    時間: 2007-2-14 11:05
原帖由 jpmontoya2 於 2007-2-13 01:18 發表
近期有朋友愛上了大富翁這玩意.....

我亦在他魔鬼下開始玩了

玩了幾個round後....粒"骰"叫我去廣華街......去到看見KWS有幾間魔鬼酒店.....唉..不幸地踩了最貴既一格.....賠了一大畢!!!!!
...


It is worth to spend money on it.....
作者: jpmontoya2    時間: 2007-2-14 11:13
原帖由 cad 於 2007-2-14 11:05 發表




you must see......

http://bbs.5imx.com/bbs/viewthre ... ;highlight=RC-POWER

http://bbs.5imx.com/bbs/viewthre ... ;highlight=RC-POWER

http:// ...


Thanks!!!

but i would choose to pay more for safety reason of LiPo~~

if you can afford ..go with something safe....hahaah
作者: orange00    時間: 2007-2-14 11:17
原帖由 kawada 於 2007-2-14 11:04 發表

Br Orange,

It stand for " original equipment manufacturer " like Yokomo V2 is OEM by ICE etc etc .. Furthermore,  Estation is now believed to be manuf by Great China ( 1st batch was ...


Oh Thanks borther Kawada. As OEM and ODM will make a big difference.
Well, nowaday I think production in mainland is not really a big concern.
Last few month, quite some brother also have a very GOOOOOD experience for production Made in U.S.
作者: kawada    時間: 2007-2-14 11:19
Br Jp's Estation deemed to be a top line model of Bantam.. refer this site for details

http://www.rcaccessory.com/
作者: kawada    時間: 2007-2-14 11:32
原帖由 orange00 於 2007-2-14 11:17 發表


Oh Thanks borther Kawada. As OEM and ODM will make a big difference.
Well, nowaday I think production in mainland is not really a big concern.
Last few month, quite some brother also have a  ...

Infact .. all kinda electronics do have potential failure due to variety of reasons .. like enduser operate error etc etc ... i cant make any conclusion on such .. but one thing for sure is .. Good quality involve huge amount of investment that small business couldnt afford ...

U r right .. even famous brands like Novak or LRP do have tons of bugs and error on their " NEW " product, all because of their product strategy, enduser as their testing rats .. but on quality wise, like finishing, packing, materials and customer service ( I mean their own not distributor in HK )  u should have no doubt on such ...  

ps.  Thz opinion of my own .. may be i am biasing something, just wanna share my thoughts for discussion and dont mean to offence anyone or anything ..  
作者: jpmontoya2    時間: 2007-2-14 13:47
原帖由 kawada 於 2007-2-14 11:19 發表
Br Jp's Estation deemed to be a top line model of Bantam.. refer this site for details

http://www.rcaccessory.com/


Br Kawaad, you sure do know the RC product very well...
作者: kawada    時間: 2007-2-14 14:03
原帖由 jpmontoya2 於 2007-2-14 13:47 發表


Br Kawaad, you sure do know the RC product very well...

Br Jp ..

Dont place me on such table that are too big...  I really admire ur master pieces on EP jet boat fleet .. forum is a good place for crazy ppl like me to share goodies with fans who have common interest ... i am a causal player and only no " Skin Hair " that pretend to be expert ..

Again ... its my own opinion for sharing .. no offensive ...
作者: jpmontoya2    時間: 2007-2-14 14:12
原帖由 kawada 於 2007-2-14 14:03 發表

Br Jp ..

Dont place me on such table that are too big...  I really admire ur master pieces on EP jet boat fleet .. forum is a good place for crazy ppl like me to share goodies with fans who  ...



indeed correct, sharing will make people move forward~~

I am also casual playing, those Lipo are only used for some weekend touring with friends and soem Semi scale truck~
作者: kawada    時間: 2007-2-14 15:22
原帖由 jpmontoya2 於 2007-2-14 14:12 發表

indeed correct, sharing will make people move forward~~

I am also casual playing, those Lipo are only used for some weekend touring with friends and soem Semi scale truck~



Yes .. Br Jp .. with ur lipo fleet .. u may enjoy a whole day EP touring which battery can be charged and prepared days before ur happy day .. this is one of the advantage on those black & silver blicks .. BTW.. charging time for all of ur lipos with 1 single charger is a very time consuming process..

U need almost 1 hr to peak off a 4800 after run it to auto cut and 45 mins + for another 3200 ..  but no worry .. u may charge them days before the event ..

Final thing u need to be aware of.... if ur ESC didnt got any Voltage cut capability.. retreat ur machine once its running slow .. dont dare to drain it dry .. it will certify if u do so ...  Orion bricks are uniquely safe and powerful lipo ever available that brands from China couldnt compare of .. pay a little more and play it safe is the rule for lipoly ....

Cheers and welcome to the crazy world of lipos ....
作者: jpmontoya2    時間: 2007-2-14 15:42
yeah Yeah

Brother Kawada, Do you use Smart Stop device?
Or you will stop playing as soon as you see the car start going slowly?

Each Novak 2S Smart stop costs me $240~~~~i am planning the quantity that i should purchase
作者: orange00    時間: 2007-2-14 15:42
原帖由 kawada 於 2007-2-14 11:32 發表

Infact .. all kinda electronics do have potential failure due to variety of reasons .. like enduser operate error etc etc ... i cant make any conclusion on such .. but one thing for sure is .. Go ...

I agree with you. But always heard from a lot of people this product is OEM of any famous company but the price wise can be far cheaper than the original one. And in fact how much people understand what is OEM, ODM, JDM such terms. Or even they are heard from somebody.
(copy cat is an exception). But certain major electronics device I still trust brand name.
For myself, I understand what's different in between of their product. Not basis the U.S. product. For example Novak is my favourite brand for ESC since 15 years ago till now. Tekin was but no more since couple month ago when I open their latest ESC's case. And even hardware is exactly the same, the performance also can have quite different output. PC's display card are very good example. Also there huge volume of information about all the stuff in RC world at the interent. But seems a lot of people still only measure the product's price other than the performance. I like to share whatever I tried especially new product with my friend even with a guys whoever I don't know. healthy discussion is quite helpful before you choose/buy something suitable yourself.  But discussion base on nothing reference ....
作者: kawada    時間: 2007-2-14 16:00
原帖由 jpmontoya2 於 2007-2-14 15:42 發表
yeah Yeah

Brother Kawada, Do you use Smart Stop device?
Or you will stop playing as soon as you see the car start going slowly?

Each Novak 2S Smart stop costs me $240~~~~i am planning the qu ...


Buddy .. i use my lipos on capable ESC s only.. since i am brushless freak u may say .. ^_^
作者: jpmontoya2    時間: 2007-2-14 16:23
原帖由 kawada 於 2007-2-14 16:00 發表


Buddy .. i use my lipos on capable ESC s only.. since i am brushless freak u may say .. ^_^


Good idea!!!!!!

I currently has that Keyence Ex Straight and GTX..are they Lipo ready?

Thanks for the info~
作者: orange00    時間: 2007-2-14 16:47
原帖由 jpmontoya2 於 2007-2-14 16:23 發表


Good idea!!!!!!

I currently has that Keyence Ex Straight and GTX..are they Lipo ready?

Thanks for the info~

GTX I think no...
作者: kawada    時間: 2007-2-14 17:03
原帖由 jpmontoya2 於 2007-2-14 16:23 發表


Good idea!!!!!!

I currently has that Keyence Ex Straight and GTX..are they Lipo ready?

Thanks for the info~


Sorry they will upset u ..
作者: orange00    時間: 2007-2-14 18:29
原帖由 kawada 於 2007-2-14 17:03 發表


Sorry they will upset u ..

So brother Kawada,
Which ESC have this function?

I just know Novak new Rooster, Mtoniks Genesis Pro. Any others?
作者: kawada    時間: 2007-2-14 18:44
原帖由 orange00 於 2007-2-14 18:29 發表

So brother Kawada,
Which ESC have this function?

I just know Novak new Rooster, Mtoniks Genesis Pro. Any others?


LRP - Competition ; 2007

My favourite -  Mamba Max
作者: supersaver    時間: 2007-2-14 18:44
原帖由 orange00 於 2007-2-14 18:29 發表

So brother Kawada,
Which ESC have this function?

I just know Novak new Rooster, Mtoniks Genesis Pro. Any others?


LRP SPHERE Competition

LRP QC3

NOSRAM Matrix

Castle Creations MAMBA Max

作者: jpmontoya2    時間: 2007-2-14 23:59
thank you all for the information~
作者: kawada    時間: 2007-2-15 00:06
原帖由 supersaver 於 2007-2-14 18:44 發表


LRP SPHERE Competition

LRP QC3

NOSRAM Matrix

Castle Creations MAMBA Max


Nosram = LRP competition 2007 but cost u hundred more for the red case

QC3 -- I seen its pic but dont c its available that soon .. let me know if it can be find elsewhere at KWS pls



[ 本帖最後由 kawada 於 2007-2-15 00:11 編輯 ]
作者: jpmontoya2    時間: 2007-2-15 10:31
Looks as tho its time for yet another upgrade!!
作者: kawada    時間: 2007-2-15 13:05
原帖由 jpmontoya2 於 2007-2-15 10:31 發表
Looks as tho its time for yet another upgrade!!


Buddy .. if u r looking for an ESC for brush on Lipo ..

Tekin RX or LRP QC3 deemed to be not a bad choice.. they both are compact in size with voltage cut capability to protect ur lipos..

which one is the best pick .. sorry u need to tell us ....

[ 本帖最後由 kawada 於 2007-2-15 13:57 編輯 ]

作者: jpmontoya2    時間: 2007-2-16 10:10
原帖由 kawada 於 2007-2-15 13:05 發表


Buddy .. if u r looking for an ESC for brush on Lipo ..

Tekin RX or LRP QC3 deemed to be not a bad choice.. they both are compact in size with voltage cut capability to protect ur lipos..
...


These looks to be costly....haha

i jsut bought has a cheaper way for my temp solution...i bought a 2cell smart stop......




歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://rc-evo.com/xbbs/) Powered by Discuz! X3.2