標題: Sakura XI Sport Set車問題 [打印本頁] 作者: temp1000 時間: 2015-5-6 08:52 標題: Sakura XI Sport Set車問題 你好，小弟是新手，有D關於Set 車問題，請CHING 指教一吓.
已買了:
*Yeah Racing (#MG-48030) Aluminum 7075 Hard Coated Motor Gear/Pinions 48 Pitch 30 Teeth
G.T. Power 7A 80W AC DC Dual Power Balance Charger Discharger (Built-in Power Supply) #C607D
3Racing Sakura XI Sport 1/10 RC Touring Car #KIT-SAKXI-S
SKYRC Cheetah 1/10 60A Brushless ESC System Combo w/ Sensored 2590KV 13.5T Motor / Program Card #SK-
Sanwa MX-V 3Channel 2.4Ghz FH2 Radio w/RX-37W Waterproof Receiver #101A30874A
Power HD High Speed Digital lineary Servo 6V 7KG 0.06Sec For 1/10 RC Car #DS-1206TG
Spped Energy 5400MAH 40C LIPO 7.4V Battery
1) ESC Program Card, 點用？ ESC 的手冊很小資料. 請分享ESC & Program Card 的 setting (for JV 場)
2) Battery And Gear 的比例 點計算 ?
3) XI Sport 各種Linkage arm長度的 setting
感謝!
作者: Chrischu33 時間: 2015-6-10 06:07
Follow factory setting for Linkage arm長度的 setting, and adjust camber, toe etc.
For esc drag brake set according to what u like, i like maybe 10-20%
search online for other SKYRC esc instruction la, there is a lot i looked at before 作者: 1312 時間: 2015-6-13 07:12
你用60A電調會易過熱再加上用13·5縻打，
要用120A先得
玩得13·5縻打就要電池的C數要6－70C以上先可谷得起。 作者: 1312 時間: 2015-6-13 07:20
13.5T gear ratio
38/19 * 85/ motor gear = 6.2 around