RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: 馬達和電變 [打印本頁]

作者: Dicleung    時間: 2016-10-31 11:45
標題: 馬達和電變
各位師兄,

有事想請教.

以下是我部車的馬達和電變的資料, 我見到馬達上寫, 應配30A sensoless brushless ESC,
在電變上寫, 應配2040 size or simliar (motor limit)

這樣配係ok嗎?

謝謝.

Mini 4500Kv Brushless MotorProduct Specifications
Type:Sensorless, Brushless Inrunner
Size:280
RPM:33,300
Bearings or Bushings:Two 3×8×4 bearings
Voltage:7.2–11.1V
RPM/Volt (Kv):4500Kv
Continuous Current:18A
Cells:6C NiMH; 2–3S Li-Po
Speed Control:30A sensorless brushless ESC
Weight:2.61 oz (74g)
Overall Diameter:0.944 in (24.0mm)
Shaft Diameter:0.079 in (2.0mm)
Shaft Length:0.55 in (14.0mm)
Overall Length:1.44 in (36.5mm)

Tazer Mini Brushless WP ESC: 25AProduct Specifications
Forward:Yes
Reverse:Yes
Brake:Yes
Time Delay Brake:Yes
Continuous Maximum Current:25A
Input Voltage:7.4–11.1V Li-Po; 7.2–12.6V Ni-MH/Ni-Cd
Input Connector Types:EC3
Output Connector Types:3.5mm bullet
Motor Limit:2040 size or similar
Momentary Peak Current:90A
Length:1.42 in (36mm)
Width:1.10 in (28mm)
Height:0.83 in (21mm)
Weight:1.34 oz (38 g)
BEC Voltage:6V
Overload Protection:Yes
Full On Resistance:.005 Ohm
Wire Gauge:16AWG
Auto Cutoff:Yes





作者: Dicleung    時間: 2016-10-31 13:51
在youtube上有見到以下改零件, 可行嗎?

(1) 馬達
https://youtu.be/ACLXf8xgPuY

(2) 電變
https://youtu.be/Ji70mQ9i8mI

(3) Servo
https://youtu.be/UxNOnJrS7Jg

謝謝.





歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://rc-evo.com/xbbs/) Powered by Discuz! X3.2