RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: TLT 用Y 線一問 [打印本頁]

作者: kaho0338    時間: 2007-4-27 00:59
標題: TLT 用Y 線一問
我部TLT 用 2 CH 既控, 我有兩隻3003, 我想用Y線將2個SERVO 連係一齊, 請問要用Y 線個電變係咪要高要求D (要高A數D)?

<br>我用LRP AI Runner Reverse digital, 請問得唔得?
Thanks <img src="./images/smilies/victory.gif" smilieid="14" alt="" border="0">
<br><br>Spec of LRP AI Runner Reverse digital

[ 本帖最後由 kaho0338 於 2007-4-27 01:04 編輯 ]
作者: orange00    時間: 2007-4-27 01:59
如果用3003, 其實窄窄地. 仲要睇你用幾吋呔同有無鎖差速.
但BEC得5V, 你帶定接收電去玩好D.
作者: kaho0338    時間: 2007-4-27 02:14
原帖由 orange00 於 2007-4-27 01:59 發表
如果用3003, 其實窄窄地. 仲要睇你用幾吋呔同有無鎖差速.
但BEC得5V, 你帶定接收電去玩好D.


原裝個條呔, 全鎖差速呀....... 加多排接收電咪好重
anyway, 等我買條y線試下先, thanks
作者: ryancmlam    時間: 2007-4-27 06:58
Whether the BEC of your ESC can provide enoght power to 1 receiver and 2 servos depends on the power (W) it can supply NOT the voltage (V). However, there is no information regarding the powe...
作者: orange00    時間: 2007-4-27 07:36
原帖由 ryancmlam 於 2007-4-27 06:58 發表
Whether the BEC of your ESC can provide enoght power to 1 receiver and 2 servos depends on the power (W) it can supply NOT the voltage (V). However, there is no information regarding the powe...

Agree! But power = Voltage X Current. Even with the same current compare wth other ESC which have 6V BEC. The power will be 1/6 less.
作者: SPAWN    時間: 2007-4-27 23:06
我部死人頭三波TLT三個SERVO(有兩個用Y線),用101BK都得wo
作者: orange00    時間: 2007-4-27 23:16
原帖由 SPAWN 於 2007-4-27 23:06 發表
我部死人頭三波TLT三個SERVO(有兩個用Y線),用101BK都得wo

101BK 個BEC係7.2V
作者: SPAWN    時間: 2007-4-28 01:10
原帖由 orange00 於 2007-4-27 23:16 發表

101BK 個BEC係7.2V

但係我TXT又唔得wo
作者: ryancmlam    時間: 2007-4-28 08:41
原帖由 orange00 於 2007-4-27 23:16 發表

101BK 個BEC係7.2V


In fact, there is no BEC in 101BK. 101BK gets the receiver power directly from the battery pack. That's why there is a seperate red receiver plug in 101BK.

If you use 101BK, your receiver needs to have the BEC circuit, otherwise, both the receiver and servo might be damaged (some might not).
作者: kaho0338    時間: 2007-4-28 19:41
今日買左條y cable, so far 都冇問題....




歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://rc-evo.com/xbbs/) Powered by Discuz! X3.2