RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: 第一次玩twin detonator..... [打印本頁]

作者: bigben 時間: 2007-4-28 02:44
標題: 第一次玩twin detonator.....
因為心急..... 個殼未嘖.... 就攞架車去玩..... finally....
 
1) 反車後the four nos. of 柱彎左
2) 個apex esc 1/4個heat sink 撞唔見左
where can i buy them back???
 
remember, pls put on the cover (condom) when you play car (sex).<IMG alt="" src="http://bbs.rc-evo.com/images/smilies/lol.gif" border=0 smilieid="12">

作者: li5115 時間: 2007-4-28 02:55
標題: 回復 #1 bigben 的帖子
真不幸

APEX : 去找代埋配翻，說明書有地址和電話。殼柱 : 如果冇斷，屈翻直就得啦。(要配翻起馬一個月，parts no. 0005714)

作者: 12wai3 時間: 2007-4-28 04:28
標題: 回復 #1 bigben 的帖子
我有一次又係無落殼, 部車 Cup4 之後個電變貼得唔好飛左出黎, 好彩只係個電變散熱擦落地無做成意外

以後都唔敢 lu

作者: kelvinblstz 時間: 2007-4-28 08:20

攞跑

作者: bigben 時間: 2007-4-28 09:18
奇蹟!! 今朝返工前走去尋晚玩車草地一個Cup4數次嘅彎位搏一搏揾唔揾得返1/4個heat sink....... 
最終......... 揾返!!!!<IMG alt="<img" src="./images/smilies/victory.gif" border=0 smilieid="14"> 
大海"LAU"針!!!<IMG alt="<img" src="./images/smilies/lol.gif" border=0 smilieid="12"> 
條殼柱有冇金屬料????<IMG alt="<img" src="./images/smilies/smile.gif" border=0 smilieid="1"> 

[ 本帖最後由 bigben 於 2007-4-28 09:19 編輯 ]

作者: 12wai3 時間: 2007-4-28 14:21
標題: 回復 #5 bigben 的帖子
恭喜晒

殼柱買D 軟身既膠都好難會斷, 最多彎左又屈番前佢

作者: bigben 時間: 2007-4-30 11:31
<

>100% completed !!!
<

>some photos for sharing ......

<

> 
nothing special...

作者: 12wai3 時間: 2007-4-30 12:39
標題: 回復 #7 bigben 的帖子
個殼整得好靚, Nice

作者: bigben 時間: 2007-4-30 13:12
thanks....

I replace two Black Pigs in my TD.

作者: Sazabi 時間: 2007-4-30 13:16
你架車好靚，尤其玩完一次重咁乾淨，我玩佐一個鐘已經污穢到唔想要部車

作者: bigben 時間: 2007-4-30 14:33
Sazabi,

我玩過一次渣!! 仲係要裸跑(without cover)...... (如上文)所以個殼未落過地.....

"我玩佐一個鐘已經污穢到唔想要部車"...... give it to me......

作者: Sazabi 時間: 2007-4-30 14:49
我第一次玩都係裸跑，玩到d泥達晒成餅係車到，充塞住部車每個空隙，又臭又污穢，不過部車性能幾好，狗骨在泥團中仍能轉動，個開關制直情.........

車的前半身都尚算ok，後半身就好像從泥沼中掘出來，主要原因可能係前轆濺射後方造成

作者: bigben 時間: 2007-4-30 14:56
塊地太爛..... 草地好d.....

作者: mark999hk 時間: 2007-4-30 14:57

原帖由 bigben 於 2007-4-30 02:56 PM 發表
塊地太爛..... 草地好d.....

how much in KWS ka ? it looks great~~~2 motors~~COOL

作者: bigben 時間: 2007-4-30 15:09
$638 +
$480 APEX ESC
both in Cheong X.

作者: mark999hk 時間: 2007-4-30 15:12

原帖由 bigben 於 2007-4-30 03:09 PM 發表
$638 +
$480 APEX ESC
both in Cheong X.

thank you thank you~~~the MT2 (1:10) shell can fit on it?

作者: bigben 時間: 2007-4-30 15:16
should be.

作者: mark999hk 時間: 2007-4-30 15:17

原帖由 bigben 於 2007-4-30 03:16 PM 發表
should be.

geart~~~thx bro.

作者: SunLi 時間: 2007-4-30 15:24
How's the battery run time of this twin detonator? cheers!!!

作者: bigben 時間: 2007-4-30 15:31
<

>intellect 3000mAh for two black pigs..... 15-20 mins......<IMG alt=

src="./images/smilies/titter.gif" border=0 smilieid="9">
<

> 
by the way, the APEX ESC can support 2 batteries at the same time!!!<IMG alt="" src="http://bbs.rc-evo.com/images/smilies/victory.gif" border=0 smilieid="14">  more powerful !!

作者: mark999hk 時間: 2007-4-30 15:36

原帖由 bigben 於 2007-4-30 03:31 PM 發表
<>intellect 3000mAh for two black pigs..... 15-20 mins......<IMG alt= src="./images/smilies/titter.gif" border=0 smilieid="9">
<> ...

what is the model of the Apex ESC? thank you

作者: SunLi 時間: 2007-4-30 15:36

原帖由 bigben 於 2007-4-30 15:31 發表
<>intellect 3000mAh for two black pigs..... 15-20 mins......<IMG alt= src="./images/smilies/titter.gif" border=0 smilieid="9">
<>  ...

15-20minis, it's lovely!

作者: bigben 時間: 2007-4-30 15:47
this one !!

作者: Badman916 時間: 2007-5-1 04:20
我都買0左 Twin Detonator, 雙麼打好正, 個波箱同 WW2 一樣但係打孖上.

作者: ryancmlam 時間: 2007-5-1 09:54
I got a Twin detonator too. As it is my sons toy, it equips with the original mechanical speed controller only. The performance is fine even using mechanical speed controller.

作者: agentjerry 時間: 2007-5-1 10:24

原帖由 ryancmlam 於 2007-5-1 09:54 發表
I got a Twin detonator too. As it is my sons toy, it equips with the original mechanical speed controller only. The performance is fine even using mechanical speed controller.

is it RTR (XB version)?

作者: bigben 時間: 2007-5-1 10:54
What is RTR???

作者: SunLi 時間: 2007-5-1 10:55

原帖由 bigben 於 2007-5-1 10:54 發表
What is RTR???

Ready To Run

作者: bigben 時間: 2007-5-1 10:58

原帖由 ryancmlam 於 2007-5-1 09:54 發表 I got a Twin detonator too. As it is my sons toy, it equips with the original mechanical speed controller only. The performance is fine even using mechanical speed controller.

細路仔平平地玩住先啦...... 但be careful don't touch the MSC....so hot!!!

RTR? no, it is not.

作者: agentjerry 時間: 2007-5-1 12:22
what battery u use?

作者: ryancmlam 時間: 2007-5-1 12:22

原帖由 bigben 於 2007-5-1 10:58 發表

 
細路仔平平地玩住先啦...... 但be careful don't touch the MSC....so hot!!!

RTR? no, it is not.

1. It is not an Ready to Run (RTR) set.
2. I think it is fine for using mechanical speed controller for "free running" (not racing on track). I can use the money (~$4xx) to buy another funny car e.g. Lunch Box instead of buying an ESC.

To brother bigben,

How's the performance of the car if using two batteries ? I

作者: bigben 時間: 2007-5-1 12:57
intellect 3000mAh.... use 1 pack...

but i have 2 packs .. may use 2 packs later.,.

作者: agentjerry 時間: 2007-5-1 13:01

原帖由 bigben 於 2007-5-1 12:57 發表
intellect 3000mAh.... use 1 pack...

but i have 2 packs .. may use 2 packs later.,.

how long could it play?

tks!!!

作者: bigben 時間: 2007-5-1 14:47
15-20 mins for one pack...
2 packs not tried yet.... but i am afraid will be too fast and uncontrolled !!!!

[ 本帖最後由 bigben 於 2007-5-2 01:25 編輯 ]

作者: ryancmlam 時間: 2007-5-1 19:33

原帖由 bigben 於 2007-5-1 14:47 發表
15-20 mins for one pack...
2 packs not tried yet.... but i am afraid will to fast and uncontrolled !!!!

Probably. The car will easily be damaged too.

作者: Badman916 時間: 2007-5-2 01:25
我諗住用一排電算喇, 孖電一來重, 二來架車無原裝位放第二舊電要擺0係車架頂會好高重心.

作者: bigben 時間: 2007-5-2 01:30

原帖由 Badman916 於 2007-5-2 01:25 發表我諗住用一排電算喇, 孖電一來重, 二來架車無原裝位放第二舊電要擺0係車架頂會好高重心.

Agree....
 
tonight I went to play...
 
oh..... the left front wheel crash to a stone and....... the wheel flied out.... and the screw locked the wheel was loose..... some little parts disappeared......<IMG alt="" src="http://bbs.rc-evo.com/images/smilies/cry.gif" border=0 smilieid="4"> 
 
need to buy those parts tomorrow...<IMG alt="" src="http://bbs.rc-evo.com/images/smilies/cry.gif" border=0 smilieid="4">

作者: Sazabi 時間: 2007-5-2 10:12
玩佐3次，其中2次都係甩螺絲收塲(丟失)，2次都係被震位個粒半"牙"螺絲，請問有冇辦法？另想問大家有否用膠水"痴"實車呔？因為唔明白說明書話"唔好痴"，但個呔於高速時好似鬆鬆地

作者: bigben 時間: 2007-5-2 10:25

原帖由 Sazabi 於 2007-5-2 10:12 發表玩佐3次，其中2次都係甩螺絲收塲(丟失)，2次都係被震位個粒半"牙"螺絲，請問有冇辦法？另想問大家有否用膠水"痴"實車呔？因為唔明白說明書話"唔好痴"，但個呔於高速時好似鬆 ...

我係個粒車輕螺絲甩咗..... 成個轆飛出來........有冇辦法??
 
但個呔於高速時好似鬆 ... ?? Agree !!! <IMG alt="" src="http://bbs.rc-evo.com/images/smilies/cry.gif" border=0 smilieid="4"> 我唸住用膠水"痴"實佢..... 唔理說明書......<IMG alt="" src="http://bbs.rc-evo.com/images/smilies/tongue.gif" border=0 smilieid="7">

作者: Badman916 時間: 2007-5-2 11:25
孖星車部份膠料好軟, 好容易會收到滑牙, 如果成日甩螺絲可能果個位已經滑0左牙要換膠件, 不過唔知邊度有得配.

條呔我唔會用膠水住, 只要佢唔飛出0黎都由得佢, WW2 高速轉彎部車側晒都無甩呔應該呢部都無問題.

作者: bigben 時間: 2007-5-2 11:28
成日甩螺絲可能果個位已經滑0左牙......... can I 痴AA膠???

作者: Sazabi 時間: 2007-5-2 11:49
甩螺絲問題：暫時會用"更長"的螺絲收緊代替，車呔方面：驚車令和車呔打磨造成破損，都係痴一痴好d

作者: bigben 時間: 2007-5-2 12:02
Sazabi,

do you car crash b4??

作者: Sazabi 時間: 2007-5-2 14:49
部車好彩仍未有大力碰撞過，不過個"半牙螺絲"位於裝車時已發覺上"唔實"，四條被震都一樣，一早已預計會甩螺絲，至今已甩脫"前右"及"後左"兩粒，可能係"賣零件"既奸計

作者: mikewu 時間: 2007-5-2 16:06
have you guys thought about the Ezilla before you getting the tamiya? If you have a choice again, would you still go wtih the tamiya or Ezilla/E savage?

作者: mark999hk 時間: 2007-5-2 16:08

原帖由 mikewu 於 2007-5-2 04:06 PM 發表
have you guys thought about the Ezilla before you getting the tamiya? If you have a choice again, would you still go wtih the tamiya or Ezilla/E savage?

I know Ezilla/E savage is cool but............expensive

作者: bigben 時間: 2007-5-2 16:31
milkewu......

I would choose E savage ......................

if I win Mark Six tonight !!!!

no one would like to buy corolla insteal of BMW if he had enough cash......

作者: agentjerry 時間: 2007-5-2 17:31

原帖由 bigben 於 2007-5-2 16:31 發表
milkewu......

I would choose E savage ......................

if I win Mark Six tonight !!!!

no one would like to buy corolla insteal of BMW if he had enough cash......

how much is e savage?

作者: bigben 時間: 2007-5-2 17:34
3xxx??

作者: tungkee 時間: 2007-5-2 22:44
同埋twin detonator用來遊街慢行會好過 e savage

作者: agentjerry 時間: 2007-5-3 00:10

原帖由 tungkee 於 2007-5-2 22:44 發表
同埋twin detonator用來遊街慢行會好過 e savage

what means by 遊街慢行?

作者: tungkee 時間: 2007-5-3 00:46

原帖由 agentjerry 於 2007-5-3 00:10 發表

what means by 遊街慢行?

http://bbs.rc-evo.com/viewthread ... page%3D3&page=1

作者: bigben 時間: 2007-5-4 02:30

原帖由 Sazabi 於 2007-5-2 10:12 發表
.......都係甩螺絲收塲(丟失)，都係被震位個粒半"牙"螺絲..

encounter same problem tonight....

what is the solution??

作者: Sazabi 時間: 2007-5-4 09:03

原帖由 bigben 於 2007-5-4 02:30 發表

encounter same problem tonight....

what is the solution??

我都乞求高手提供辦法

暫時用15mm螺絲頂當

作者: bigben 時間: 2007-5-4 09:57
where do you get the 15mm螺絲 ??

thanks

作者: Sazabi 時間: 2007-5-4 12:59
都係另一部車"借"過來，另外還有一個"破釜沈舟"的辦法：貫穿螺絲孔，然後用"絲母"在另一邊修實，或用"索帶"修實，不過仍未試過在這部車身上，以前在另一部車的尾避震試過用"索帶"

作者: bigben 時間: 2007-5-4 14:46
"貫穿螺絲孔，然後用"絲母"在另一邊修實...." actually I think it is a good method and I wonder why this model do not adopt this method. But 貫穿 you need to use a very long 螺絲 !!!

"或用"索帶"修實" I also have this idea... but need some techinque....

if you have any solution, please take photo and show to us la..... (and vice versa...

)

作者: Sazabi 時間: 2007-5-4 15:36

原帖由 bigben 於 2007-5-4 14:46 發表
"貫穿螺絲孔，然後用"絲母"在另一邊修實...." actually I think it is a good method and I wonder why this model do not adopt this method. But 貫穿 you need to use a very long 螺絲 ! ...

見圖中紅色箭咀上是3mm膠索帶

作者: Sazabi 時間: 2007-5-4 15:44
或可用鋼線穿過縛實(剛剛想到的)

作者: bigben 時間: 2007-5-4 17:00
<

原帖由 Sazabi 於 2007-5-4 15:44 發表或可用鋼線穿過縛實(剛剛想到的)<IMG alt= src="./images/smilies/tongue.gif" border=0 smilieid="7">

<

> 
<

>you mean : use 鋼線 to replace screw?? or just wrap the screw to prevent it from loosen ?

[ 本帖最後由 bigben 於 2007-5-4 17:04 編輯 ]

作者: Sazabi 時間: 2007-5-4 17:12

原帖由 bigben 於 2007-5-4 17:00 發表
<> 
<> 
<>you mean : use 鋼線 to replace screw?? or just wrap the screw to prevent it from loosen ?

use 鋼線 to replace screw

作者: bigben 時間: 2007-5-5 02:26

x 2

作者: Sazabi 時間: 2007-5-5 10:04
這(可能)只是一個"破釜沈舟"的辦法，未係時候使用，建議都係用15mm-tapping screw，即係類似本說明書上的"MA3"的樣子不過係3x15mm，相信都唔難揾到，亦可以玩得一排的了，如果有心機更可以"改做"半牙螺絲，用方法"處理"掉一半螺旋牙，有人話用"熱縮膠"，亦可以試用"螺絲膠"，不過要等"乾硬"佐先可用，亦要配合"精準計算"，造到和"MA2"一樣，長度當然要添加少少，如15-16mm啦

[ 本帖最後由 Sazabi 於 2007-5-5 10:05 編輯 ]

作者: bigben 時間: 2007-5-7 01:03
problem solve.. i use less than $5 to solve the problem permanetly !!!

post u photo later !

作者: Sazabi 時間: 2007-5-7 09:30
Good

作者: Badman916 時間: 2007-5-7 10:42
我架 TWIN DETONATOR 已經焊好晒電子0野試好, 裝埋上車就可以裸跑試車喇!

作者: bigben 時間: 2007-5-7 11:04
標題: DIY modification!!!
spend less than $20 !!! <IMG alt="" src="http://bbs.rc-evo.com/images/smilies/lol.gif" border=0 smilieid="12"> 
look stable !!!
material : 
 
1) 亞加力膠板一條 (1cm x 40cm) ~ free
2) 索帶八條 ~ (一包10元)
3) 厚身雙面膠紙 (一小塊) ~ (一卷10元)
 
見圖 :

作者: bigben 時間: 2007-5-7 11:10
Badman916,

post photo if you finish the cover...

作者: Sazabi 時間: 2007-5-7 11:13
Good Job

黑豬好靚

幾錢？好玩嗎？部車仲係咁乾淨！條令白雪雪

作者: bigben 時間: 2007-5-7 11:32
<

>$85 per one
<

> 
<

>tidy ? cos I play in carpark only....<IMG alt=

src="./images/smilies/mad.gif" border=0 smilieid="11">

[ 本帖最後由 bigben 於 2007-5-7 11:45 編輯 ]

作者: bcgg 時間: 2007-5-7 11:41

原帖由 bigben 於 2007-4-28 02:44 發表
<>因為心急..... 個殼未嘖.... 就攞架車去玩..... finally....

Hi, my TD

作者: bcgg 時間: 2007-5-7 11:46
Different shell...
and modify to 2 x 7.2V...

作者: bigben 時間: 2007-5-7 11:46
your TD should be very fast...
how many turns of your motors?
one or two battery?

作者: bcgg 時間: 2007-5-7 11:49

原帖由 bigben 於 2007-5-7 11:46 發表
your TD should be very fast...
how many turns of your motors?
one or two battery?

25T, 14.4v, it much move powerful!
Try to use two 7.2V, you will feel very different I sure!!!

作者: bigben 時間: 2007-5-7 12:03
1) do you find that the 搖臂 of this car is quite weak? screw easy to be loosen ? 
 
2) what is your suspension? how much?
 
3) where do you get the stand for the 2nd battery?

[ 本帖最後由 bigben 於 2007-5-7 12:06 編輯 ]

作者: Sazabi 時間: 2007-5-7 13:19

原帖由 bcgg 於 2007-5-7 11:49 發表

25T, 14.4v, it much move powerful!
Try to use two 7.2V, you will feel very different I sure!!!

個摩打頂得住14.4v？

作者: Badman916 時間: 2007-5-7 16:31

原帖由 bigben 於 2007-5-7 11:10 AM 發表
Badman916,

post photo if you finish the cover...

我架車仍然得排骨, 個殼最後至搞, 整好會貼相.

作者: Badman916 時間: 2007-5-8 01:16
排骨一條, YEA!

登錄/註冊後可看大圖

作者: AltezzaMak 時間: 2007-5-10 23:25
我都有部twin detonator, 玩起慢爬車轆空轉都幾勁, 你地有冇鎖差速呀?

作者: AltezzaMak 時間: 2007-5-11 00:10

原帖由 Badman916 於 2007-5-7 07:16 發表
排骨一條, YEA!

登錄/註冊後可看大圖

你用Novak Super Duty XR ESC ? 你買左幾$

作者: Sazabi 時間: 2007-5-11 09:39

原帖由 AltezzaMak 於 2007-5-10 23:25 發表
我都有部twin detonator, 玩起慢爬車轆空轉都幾勁, 你地有冇鎖差速呀?

個人意見：似乎呢部車玩快好d

作者: bigben 時間: 2007-5-11 09:51
agree.....
use black pig is good enough......
Sazabi, stick your tyre ?

作者: Badman916 時間: 2007-5-11 10:44

原帖由 AltezzaMak 於 2007-5-11 12:10 AM 發表

你用Novak Super Duty XR ESC ? 你買左幾$

$9xx 打開先知原來0甘大個, 2 個普通 ESC 0既 Size.

作者: bigben 時間: 2007-5-11 11:27
badman, run your car already?

作者: Badman916 時間: 2007-5-11 22:53

登錄/註冊後可看大圖

只係屋企裏面試0下, 個殼仲未噴, 有關麼打問題, Twin Detonator 前波箱麼打原來係逆轉, 可能用黑豬玩會比較適合.

[ 本帖最後由 Badman916 於 2007-5-11 23:18 編輯 ]

作者: bigben 時間: 2007-5-12 01:30
are your motors BZ?

use one battery?

your TD will be very fast but the run time will be very short......

作者: Badman916 時間: 2007-5-12 13:45
我諗部車太快都係反車, 諗諗轉返黑豬先.

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://rc-evo.com/xbbs/)