RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: Twin Detonator 油壓 [打印本頁]

作者: dl7 時間: 2007-7-13 10:49
標題: Twin Detonator 油壓
Any 油壓 suitable for Twin Detonator?
Thank you!

作者: dl7 時間: 2007-7-13 10:50
Is it 兩長兩短 or all are the same length?

作者: bcgg 時間: 2007-7-13 12:11

原帖由 dl7 於 2007-7-13 10:50 發表

 登錄/註冊後可看大圖

Is it 兩長兩短 or all are the same length?

I modify my DT both front and rear the same.

[ 本帖最後由 bcgg 於 2007-7-13 12:15 編輯 ]

作者: dl7 時間: 2007-7-13 12:16
You use what damper?
Thank you!

作者: Oakfield 時間: 2007-7-13 12:17

原帖由 dl7 於 2007-7-13 12:16 發表

 登錄/註冊後可看大圖

You use what damper?
Thank you!

You can try to buy the oli damper in GPM. they have alot of size. and quite OK

[ 本帖最後由 Oakfield 於 2007-7-13 12:37 編輯 ]

作者: Evo露筍 時間: 2007-7-13 12:18
標題: 回復 #5 Oakfield 的帖子
how much about it??

作者: Oakfield 時間: 2007-7-13 12:19

原帖由 Evo露筍 於 2007-7-13 12:18 發表

 登錄/註冊後可看大圖

how much about it??

I forgot lar; coz bought long time ago;

作者: dl7 時間: 2007-7-13 16:15
What is GPM?
Thank you.

作者: simon6678 時間: 2007-7-14 03:05
標題: 回復 #3 bcgg 的帖子
Could you tell me how many battery you use??? As I just bought the same ESC as yours.

作者: AltezzaMak 時間: 2007-7-15 00:58
但GPM印象係, 好貴&好粗糙

作者: bigben 時間: 2007-7-15 01:17
gpm.... not too expensive... but quality is not up to satisfaction... (heard from other users...)

作者: bcgg 時間: 2007-7-15 18:24

原帖由 simon6678 於 2007-7-14 03:05 發表

 登錄/註冊後可看大圖

Could you tell me how many battery you use??? As I just bought the same ESC as yours.

2 x 7.2V

作者: simon6678 時間: 2007-7-15 18:31
標題: 回復 #12 bcgg 的帖子
Where you put the second one???

作者: dl7 時間: 2007-7-16 11:08
I want to put a 油壓 for my Twin Detonator ar.....
Any recommendation?
Thank you!

作者: bcgg 時間: 2007-7-16 11:11

原帖由 simon6678 於 2007-7-15 18:31 發表

 登錄/註冊後可看大圖

Where you put the second one???

You can see I place one more battery holder, top of the orginal battery

[ 本帖最後由 bcgg 於 2007-7-16 11:13 編輯 ]

作者: bcgg 時間: 2007-7-16 11:14

原帖由 dl7 於 2007-7-16 11:08 發表

 登錄/註冊後可看大圖

I want to put a 油壓 for my Twin Detonator ar.....
Any recommendation?
Thank you!

平平地,咪去GPM買套玩下囉...

作者: dl7 時間: 2007-7-16 11:30
1/ Where can I buy it?
2/ How much?
3/ GPM is the brand?
4/ Plastic oil damper or metal oil damper?
5/ Any specific model which suit TD?

Many thanks.

作者: dl7 時間: 2007-7-16 16:44
I found the GPM damper in ebay but cost $250 not include shipping.

登錄/註冊後可看大圖

作者: bcgg 時間: 2007-7-16 17:05

原帖由 dl7 於 2007-7-16 16:44 發表

 登錄/註冊後可看大圖

I found the GPM damper in ebay but cost $250 not include shipping.

登錄/註冊後可看大圖

你喺Ebay實貴喎....你不如直接去Kws,Gpm(展X)買啦.....

作者: 800mah 時間: 2007-7-16 17:18
展X買都係 ~$2xx, 又唔使比shipping

作者: bcgg 時間: 2007-7-16 17:21

原帖由 dl7 於 2007-7-16 16:44 發表

 登錄/註冊後可看大圖

I found the GPM damper in ebay but cost $250 not include shipping.

登錄/註冊後可看大圖

又或者平D $200內, 3Racing 嗰D又靚仔D, 都係KWS搵到...

作者: dl7 時間: 2007-7-16 18:01
The length of the damper should around ?mm

Thank you.

作者: li5115 時間: 2007-7-16 18:15
GPM Damper OK. I use on my Twin Detonator too.

[ 本帖最後由 li5115 於 2007-7-16 18:16 編輯 ]

作者: dl7 時間: 2007-7-16 20:47
li5115 ,
Where can I find your shell?
Anymore shell also suit for TD?

Thankyou!

作者: li5115 時間: 2007-7-16 21:11

原帖由 dl7 於 2007-7-16 20:47 發表

 登錄/註冊後可看大圖

li5115 ,
Where can I find your shell?
Anymore shell also suit for TD?

Thankyou!

It is a HPI body. I bought in Jet Hobby 6 months ago. No stock in this moment.

作者: bcgg 時間: 2007-7-17 17:15

原帖由 li5115 於 2007-7-16 21:11 發表

 登錄/註冊後可看大圖

It is a HPI body. I bought in Jet Hobby 6 months ago. No stock in this moment.

Hi, you did a good modify on your TD! Would you mind open the shell, show us the chassic which parts you have change?

作者: li5115 時間: 2007-7-17 18:54

原帖由 bcgg 於 2007-7-17 17:15 發表

 登錄/註冊後可看大圖

Hi, you did a good modify on your TD! Would you mind open the shell, show us the chassic which parts you have change?

I just change the ESC (APEX), dampers and suspension arms.

作者: li5115 時間: 2007-7-18 04:09

原帖由 dl7 於 2007-7-16 20:47 發表

 登錄/註冊後可看大圖

li5115 ,
Where can I find your shell?
Anymore shell also suit for TD?

Thankyou!

Take a look here,
http://www.shopatron.com/index/137.0.22093.7259.0.0.0
http://www.hpiracing.com/hpibodies

作者: ryancmlam 時間: 2007-7-18 08:43
Bro li5115 alway modify his car extensively and comperhensively.

P.S. my TD still uses the mechanical speed controller that the kit comes with.

作者: bigben 時間: 2007-7-18 09:53

原帖由 li5115 於 2007-7-17 18:54 發表

 登錄/註冊後可看大圖

I just change the ESC (APEX), dampers and suspension arms.

li5115, how much is the suspension arm? where to buy? GPM??

作者: dl7 時間: 2007-7-18 10:59

原帖由 bcgg 於 2007-7-16 17:21 發表

又或者平D $200內, 3Racing 嗰D又靚仔D, 都係KWS搵到...

If I want to buy 3Racing, when model I should buy?
Thank you.

作者: dl7 時間: 2007-7-18 11:01
Is that I can use the HPI shell after changing the suspension arm?

作者: li5115 時間: 2007-7-18 14:57

原帖由 bigben 於 2007-7-18 09:53 發表

 登錄/註冊後可看大圖

li5115, how much is the suspension arm? where to buy? GPM??

IN Hobby Hobby.$forgot.

作者: tatame 時間: 2008-4-16 00:34

原帖由 bcgg 於 2007-7-13 12:11 發表

 登錄/註冊後可看大圖

I modify my DT both front and rear the same.

登錄/註冊後可看大圖

你好, bcgg 兄見到你改左個前後避震架加長左支避震, 我想問下個避震架o係邊度買同原本for 咩車用????如果我用本身個A臂唔係用你個短A臂又啱裝嗎?我都想加長個避震行程

thanks

[ 本帖最後由 tatame 於 2008-4-16 00:35 編輯 ]

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://rc-evo.com/xbbs/)