RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: 我的零五IFS [打印本頁]

作者: Brushless    時間: 2007-10-14 18:47
標題: 我的零五IFS
各住爸打,事先聲名,本文頭數佰字似寫Blog多過談論IFS,冇興趣者敬請略過。

今日天氣涼快得來又冇雨,本來最適合去放車,其實前天也把數排鋰電叉好,但今天還是留在家中休息..............

昨天要工作廿四個鐘,早上和下午的工作量還可以,但到了晚飯時間收到通知有位客人遇上問題,經三大部門研究後,決定幫這位人客換一個零部件。但這個零部件不是公司的"conventional item",故要用者自付。雖然這個零部件要幾皮,但這位客人說:能夠幫得上忙,多少錢也不成問題。好,call sales 攞零件,去馬!(其中一位高層說)

三大部門齊心合力,人數排面贏晒。三個頂級,三個中高級,成五六個中低級。結果.......... 無人喺熟手。五成時間發號司令的,竟是那 sales。

我不是不尊重那些高層人事,事實上,他們為了一個生客星期六晚也飛撲回來幫手,眞的籍得尊敬。只是我晚上三點終於可以休息時睡在床上諗,如果我喺果位生客,付出了幾皮嚟買零部份,又付出百份百的信心,換來的竟是............

最後越諗越唔安樂,我想最快也五點才睡得着。今天醒來後要處理 family duty,兩點後才有私人時問,但個頭好痛好痛...........

都喺唔去放車,去 KWS 放吓血($$$)。

其實我的IFS是購自 Mr.星野,真的多謝星野的完美砌工。但我要用國產雕刻刀,再請Michelangelo上身雕去電池架上的凸位以方便放鋰電。車殼用原裝 Ebbro(無心機之作)。並打算安上半新半舊的電子嘢。裝好落場玩過後再報告吧!

作者: Brushless    時間: 2007-10-14 18:58
真奇怪,IFS用 48 pitch 70 齒,齒輪已差不多突出底板,故不能用上慢齒比行5.5R,只好用10.5R啦

作者: tiger1    時間: 2007-10-14 18:59
work hard but enjoy life la.
作者: xrvct    時間: 2007-10-14 19:19
雕得好辛苦wor~
作者: 星野一義    時間: 2007-10-14 21:08
得好
幾時一齊玩吓車呀~
作者: ernestf    時間: 2007-10-14 23:09
Hi

Thanks for your sharing.
My TA05R can use 105T 64pitch spur, ie, I think it can fit 78T 48pitch without any problem. Not sure what motor mount you are using and will this make any difference.

Hope this helps
Ernest
作者: 馬輝    時間: 2007-10-14 23:12
原帖由 Brushless 於 2007-10-14 18:58 發表 ]
真奇怪,IFS用 48 pitch 70 齒,齒輪已差不多突出底板,故不能用上慢齒比行5.5R,只好用10.5R啦

呢個不是TA05的通病嗎?
作者: Brushless    時間: 2007-10-14 23:30
原帖由 ernestf 於 2007-10-14 23:09 發表
Hi

Thanks for your sharing.
My TA05R can use 105T 64pitch spur, ie, I think it can fit 78T 48pitch without any problem. Not sure what motor mount you are using and will this make any difference.
...

sorry, I have made a mistake.

Mr.星野 reminded me that the 70 gear isn't 48 pitch, it is the standard tamiya 04 type.

so, IFS in fact can accept fast and slow gear combination.

that means it isn't really necessary to buy the 10.5R
作者: WallaceNg    時間: 2007-10-14 23:34
雕左有咩用?
作者: Brushless    時間: 2007-10-16 01:10
今夜趁太太返公,自已努力趕功,終於裝上了電子嘢。

原來在IFS/05裝電子嘢,比我以前任向一架touring都難,因為個兜都幾細呢!

剪servo耳仔時又不幸剪衰了

個原裝尾油壓板用手指尾都可整彎,䏲黎都好難唔換喇。

作者: Brushless    時間: 2007-10-16 01:17
excuse me,仲有仲有當我把車仔全速離力空轉時,発覺10.5R個摩打聲同我個5.5R真喺差好遠,弱好多好多................. 正合我意,慢人match慢車
作者: 觀星是答案    時間: 2007-10-16 01:38
原帖由 Brushless 於 2007-10-16 01:10 發表
今夜趁太太返公,自已努力趕功,終於裝上了電子嘢。

原來在IFS/05裝電子嘢,比我以前任向一架touring都難,因為個兜都幾細呢!

剪servo耳仔時又不幸剪衰了

個原裝尾油壓板用手指尾都可整彎, ...

係個摩打放 o係中間, 搞到 o的電子 o野唔可以放埋一齊先搞到好似無位 o甘 o者
作者: benz1850    時間: 2007-10-16 14:46
師兄, 我同你一樣都係Novak XBR + 10.5 r+ 05 IFS.  師兄行幾多齒比, Menu 話比19 T brushed 小一牙, 但係我連19T行幾多都唔知.  師兄可唔可以話比我知, 唔該晒

同捚, 你點裝XBR起車尾, 洗唔洗升高先裝到, 因為真係得好小位
作者: Brushless    時間: 2007-10-16 16:36
標題: 回復 13# 的帖子
In fact, I haven't try it out yet, so you are more experienced than me

But the menu suggests we start from gear ratio 7.5:1, then go lower if the car is too slow. So, I plan to use 48pitch 75 plastic gear, 48 pitch 23 metal gear (75/23 x 2.25 = 7.3), if the car is too slow, I'll change for 24 meatal gear, etc.

For"同捚, 你點裝XBR起車尾, 洗唔洗升高先裝到, 因為真係得好小位", I use a hobby knife to cut out part of the chasis in order to make some room for the XBR
作者: benz1850    時間: 2007-10-17 02:02
I will try 78/30 or 74/28 depends on I have time to change the "big gear" or not, then try this Thu @ TRC.  And let you know after that.  I tried SP's 11.5R, and it have real 23T performance.  But this time, I have chance to try branded name product like Novak....oh..... can't wait.

I use a servor mount from TL 01 to rise up the XBR.  I didn't like to do that, but no other way to install it there.  It is better then "stick" in on top of turning servor anyway.  Because my carbon chassis is hard to cut off some piece of plastic of chassis......

Thanks
作者: Brushless    時間: 2007-10-17 08:02
your first gear combination is 5.85:1, second is 5.94, please beware of the possibility of ESC overheat, personally I have had quite some bad overheat experiences with Novak brushless system because of gear overload. Or you may consider to install a powerful fan for the ESC
作者: benz1850    時間: 2007-10-20 01:47
Yes, so I tried 78/29 at the first trial/  Corning is, no power.  But top speed is good at straight road.  Temp is....cool right after running.  it is 6.05:1.  then Change to 78/26, wow it is great for me.  Corning is powerful, accretion is good, top speed is OK for TRC.  capable to catch up 05MS with 8T brushed motor (or course, not a 8T at good status.
Overall speaking, this combination and  is good and worth for $$$.
作者: mschumi    時間: 2007-10-20 02:00
原帖由 馬輝 於 2007-10-14 23:12 發表

呢個不是TA05的通病嗎?

慢齒比行5.5R,只好用10.5R啦
帥兄
我係新手,我今日買了TA05-IFS 但係唔明 5.5R/10.5R 是什麼
可否話我知嗎?

Thanks!
作者: mschumi    時間: 2007-10-20 12:27
no reply
作者: UPS    時間: 2007-10-20 16:11
原帖由 mschumi 於 2007-10-20 02:00 發表

慢齒比行5.5R,只好用10.5R啦
帥兄
我係新手,我今日買了TA05-IFS 但係唔明 5.5R/10.5R 是什麼
可否話我知嗎?

Thanks!


其實 5.5R / 10.5R 都係代表無刷摩打速度 .
由 2.5R/3.5R/4.5R  .... 11.5R/13.5R 等等
數字越細速度就最快
反相數字越大就最慢
作者: mschumi    時間: 2007-10-20 16:40
原帖由 UPS 於 2007-10-20 16:11 發表


其實 5.5R / 10.5R 都係代表無刷摩打速度 .
由 2.5R/3.5R/4.5R  .... 11.5R/13.5R 等等
數字越細速度就最快
反相數字越大就最慢

Many Thanks !
作者: Brushless    時間: 2007-10-20 18:15
benz兄,多謝你的report

但你一定比我強得多。我昨天行75:25(即又喺6.75:1),在TRC被怏車由頭射到尾,隨身又冇大過25齒的齒輪,冇得攪,玩buggy算。

個人覺得可能膠料太多,架車大油出彎時(或剛碰過後)有D鬼,時左時右,所以冇太大信心出彎狂踩油。

所以今日出咗去買D硬料和再換下齒輪,希望下次再去冇咁阻街啦。

又各位TRC快車師兄,我己經儘量選冇車先出嚟玩,同係外彎讓車,但你哋知啦,TRC今次個場彎位好緊密,這個彎我在外彎,下一個就變成內彎,我都冇法。

最高記錄,在同一個彎被同一個穿短褲的師兄先射尾,then車左側,再射尾............3 combo,哈(sorry,用咗amat專用詞)!我諗佢真喺好忙,好趕,等一等都冇時間。

作者: Concept    時間: 2007-10-21 00:07
"所以今日出咗去買D硬料和再換下齒輪,希望下次再去冇咁阻街啦,我己經儘量選冇車先出嚟玩"

NO!
I got several time to run with you, actually you do a great job than most people IMO, at least you have intension to let fast guy go first and take the right time on the track. May be the track traffic is rush in some time, my question is you still notice fast car is approching you and give the way, BUT why some fast guy don't know it has a slow car ahead and should be reducing speed then make a clear pass?
作者: Rcrounder    時間: 2007-10-21 00:22
Agreed. Seems people at TRC have no patient to pass other people's car. They can drive fast but ...
作者: minimini    時間: 2007-10-21 00:23
原帖由 Rcrounder 於 2007-10-21 00:22 發表
Agreed. Seems people at TRC have no patient to pass other people's car. They can drive fast but ...


.........no manner at all.......
作者: mschumi    時間: 2007-10-21 22:06
DSC03971.JPG
登錄/註冊後可看大圖