RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: 想問問m03r適唔適合玩無刷? [打印本頁]

作者: dream_hksi 時間: 2007-11-1 21:02
標題: 想問問m03r適唔適合玩無刷?
如題...玩5.5T個車架會唔會頂唔住?...
見車架真係好似幾脆弱...
驚一撞就拜拜....
如果玩唔到5.5T既有d咩T係適合既?
thx各位師兄....

另外想問問Xpress好唔好?...
幾$$$?...
thx a lot

作者: 3pk_supra 時間: 2007-11-1 21:06
11.5係咪好d呀?.?

作者: kaho0338 時間: 2007-11-1 21:09
11.5 t 會好好多...
5.5 一撞就say goodbye

作者: Administrator 時間: 2007-11-1 21:10
If you fear that much about total carnage, then you shouldn't use it!!!

Well, The guys in RC Car actions (A Yankee RC Car magazine) had done it few months back. Putting a 5 turn Brushless in the M03. and manage to get close to 94km/h. so there you go......

but for a M car to put brushless engine. many of the people who driven one before complain about the stiffness of the car at the front, and the tail is a bit loose. also excessive understeering of the car itself. so if you want to try it. make sure you have that in mind........

作者: 長崎良尾 時間: 2007-11-1 21:39

m03用.....唔好玩死硬

作者: 毒魚 時間: 2007-11-1 22:01
乜車用高速撞乜都死= w =zzzz

作者: Brushless 時間: 2007-11-1 22:18
哦，你怕第二日唔玩M仔，咁個快無刷都可以放落其它touring到呢

其實5.5R 放落M仔到可考慮用4或5cells，易控D，但D電位就要諗諗佢喇。

作者: test09 時間: 2007-11-7 20:36
5.5R 放在大 1:10 已經快到死, M 車的話

作者: kaho0338 時間: 2007-11-7 20:41
撞唔撞都好, 用到今高turn 數, 有一定熱力, 個車架會溶

作者: dream_hksi 時間: 2007-11-19 20:40
謝謝各位師兄..
而家買左Novak GTB 9.5r,,
試試先

作者: 長崎良尾 時間: 2007-11-19 21:53

.....怳你好運

作者: natural0112 時間: 2007-11-19 23:39
我好期待佢ge用後報告

作者: AMAT 時間: 2007-11-19 23:43
唔係呀....M03玩5.5R.....呢位版友好勇......

真係一轉灣就CUP車拉~!

想玩BRUSHLESS,玩呢個EXIGE啦!13.5,已經極限!

作者: minimini 時間: 2007-11-20 00:02
5.5R in a M03..........die-hard.......

作者: Buildinglung 時間: 2007-11-24 04:22
5.5R

???? So fast for M03 la.... not the problem of running performace, is the plastic classic not strong enough for so high speed........... the gear box will..........HAHAHA!!!! and have you consider about the gear ratio???? what gear ratio you willing to use???? an not correct gear ratio will cause over heat or damage of the brushless.....

作者: jas 時間: 2007-11-24 12:53
How about for ABC or Atlas 4WD Mini chassis?
Brushless okay ma? 10.5R or 13.5R nei?

作者: WallaceNg 時間: 2007-11-24 16:58
m車用brushless，一定cup車

作者: dream_hksi 時間: 2007-11-25 18:14
最後用左9.5r,,
8.5 gear ratio,,
都係真係太快..
轉灣勉強ok,,
個ball diff玩左一次已經散左..

作者: cyken2512 時間: 2007-12-2 10:22
恭喜~~恭喜~~~M03R装无刷5.5R..我捻都无捻过~~

作者: ellis 時間: 2007-12-2 15:44
可以出過架用碳板既m車喇

作者: mk9001 時間: 2007-12-25 16:55
5.5R實行快死(車)......

:funk:

[ 本帖最後由 mk9001 於 2008-1-1 16:55 編輯 ]

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://rc-evo.com/xbbs/)